REPAIR TO MISC TYPE OF STEEL AND WOODEN FURNITURE FOR MD AND OTM ACCN AT AF STN KHERIA AGRA

Amount

REPAIR TO TABLE DINING OR`s SUNMICA TOP 2100 MM X 900 MM X 760 MM, Drg No. FD-165 (M) Removing of unserviceable top and S & F new top of 18 mm thick pre- laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.

Taking down old unserviceable legs and S & F new leg of Ist class HW ( teak wood) size as shown on drg.

Taking down old unserviceable long rail and S & F new long rail of Ist class HW ( teak wood) size as shown on drg.

Taking down old unserviceable short rail and S & F new short rail of Ist class HW ( teak wood) size as shown on drg.

M& L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table dining OR's, 2100 mm x 900 x 760 mm except top over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO SOFA SET 4 SEATER/ 5 SEATER, Drg No. FD-281/ 373/ 258 Taking down old unserviceable front/ rear leg of sofa set 4 seater/ 5 seater and S&F new front/ rear leg made out of 1st class hard wood (teak) as per existing shape and size complete all as specified and shown on drawing and as directed.

Taking down old unserviceable side(left/ right) and front/ rear rail of sofa set single seater and S & F new side (left/ right) and front/ rear rail of sofa set single seater made out of Ist class hard wood (teak) as per existing shape and size complete all as specified, shown on drawing and as directed.

Taking down old unserviceable long rail ( front/rear) of sofa three seater and supply and fixing of new long rails ( front/rear) of of sofa (three seater)made out of Ist class hard wood (teak) as per existing shape and size compete all as specified, shown on drawing & as directed.

Taking down old unserviceable battens of seat/ back of sofa single/ three seater and S&F new battens of seat/ back of sofa single/ three seater made out of Ist class hard wood (teak) as per existing shape and size all as specified, shown on drawing and as directed.

Taking down old unserviceable arms of sofa single/ three seater and S & F new arms made out of Ist class hard wood (teak) as per existing shape and size complete all as specified, shown on drawing and as directed.

Removing of existing unserviceable cushion from seat and back of sofa set 4 seater/ 5 seater and S & F new foam cushion 95 to 100 mm thick, 32 density duly covered with superior quality tapestry cloth all as specified and directed .

Removing of existing old unserviceable tapestry cloth from seat and back of sofa set 4 seater/5 seater and S & F new tapestry cloth of superior quality suly stitched all as specified and directed .

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of sofa chair over and including a coat of wood filler & tightening of all loose componentscomlpete all as specified and as directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of sofa set 03 seater over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO LOCKER BED SIDE WOODEN, Drg No FD-54 Removing of existing unserviceable shutter and S&F 18 mm thick particle board commercial type with 4 mm thick teak wood beading on three sides of shutter all as specified and directed.

Removing of existing unserviceable back and S&F new ply wood back of 6 mm thick commercial type all as specified and directed.

Removing of existing unserviceable top and S&F new top of 18 mm thick particle board commercial type with 4 mm thick teakwood beading all around all as specified and directed.

Removing of existing unserviceable shelves and S&F new shelves made of 18mm thick commercial partiocle board with 4mm teak wood beading through finished complete all as specified and directed.

Removing of existing unserviceable partition wall and S&F new partition wall of 18mm thick particle board commercial type complete all as specified and directed.

Removing of existing unserviceable legs and S&F new legs of 1st class hard wood teak duly planned as per existing shape and size all as specified and directed.

Taking down existing unserviceable hinges and S&F new 18mm wide piano type hinges of mild steel chromium plated ISI marked with required size of SS screws all as specified and directed.

Taking down existing unserviceable handle and S&F new aluminium anodized 100 mm long handle ISI marked with required size of SS screws all as specified and directed.

Taking down existing unserviceable hasp and staple and S&F new hasp and staple aluminum anodized 75 mm long ISI marked with required size of SS screws all as specified and directed.

M&L for painting with two coats of synthetic enamel paint with one coat of pink primer on new components & one coat of synthetic enamel paint on old surfaces of locker bed side wooden complete internally and externally except bottom including preparation of old/ new surfaces all as specified & directed.

REPAIR TO TABLE WRITING MED/ JCOs/ SMALL, Drg No. FD-249, 275 Removing of old unserviceable table top and S & F new table top of pre-laminated particle board one side decorative 18 mm thick interior grade as per existing shape and size including 4 mm thick teak wood beading all around complete all as specified and shown on drawing .

Removing of old unserviceable legs under the table writing and S & F new leg of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished smooth complete all as specified and shown on drawing.

Description all as per item No 26.00 here-in-befora but shutter.

M& L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table writing except top and bottom over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO HAT STAND WITH MIRROR, Drg No. FD-233, 361, 362 & 1110 Taking down old unserviceable peg of hat stand and S&F new aluminium peg of existing shape and size, fixed with required size brass screws complete all as specified and directed.

Taking down old unserviceable mirror of hat stand and S&F new mirror 5mm thick as per existing shape and size including beading and 6 mm thick ply wood back complete all as specified and directed.

M& L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of hat stand with mirror over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO TEAPOY VERANDAH (MAP), Drg No. FD-FD/ E6/ MAP/ 17 Removing of unserviceable top and S & F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick TW beading all-round the teapoy verandah.

Removing of old unserviceable square MS pipe and S&F 18 mm square MS pipe of heavy quality including one coat of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

Removing of old existing unserviceable MS rod and supply & fixing new MS bar 5mm dia, bar base tray as per existing size and welded to tray complete all as specified and directed.

S&F hard rubber shoe of superior quality as per existing shape and size for teapoy verandah all as directed.

M&L for painting with one coat of synthetic enamel black paint including preparation of surfaces of teapoy verandah complete all as specified and directed.

TABLE DRESSING GENTS (MAP), Drg No. FD-FD/ E6/ MAP/ 16 Removal of old unserviceable existing back ply of looking mirror and S&F new back ply wood 1200 mm x 600 mm, 12mm thick, teak face plywood BWR grade complete all as specified and shown on drawing .

Replacement of looking mirror with S&F new looking mirror of size 1190 mm x 590 mm x 5.5 mm thick as approved.

Replacement of glass shelves with S&F new glass shelves 5.5 mm thick supproted on runner/ ass holder as per existing size as specified and directed.

Removal of old unserviceable teak wood frame with supply & fix teak wood frame existing size of mirror frame made to shape as per existing size and as directed.

Removal of old unserviceable side with supply & fix new sides of prelaminated particle board as per existing size shown on drg as directed.

Removal of old unserviceable teak legs with supply & fix teak wood legs 450 mm x 38 mm x 38 mm of existing size and shape as directed.

M& L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table dressing gents over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR SHOE RACK STEEL SIZE 880 MM X 845 MM X 300 MM, Drg No. FD-FD/ E6/ MAP/ 02 Removing old worn out 3mm dia MS rod and S&F new MS rod 3mm dia horizontal spacing as existing shape and size as directed.

Description all as per item No 44.00 here-in-before but vertical spacing.

Taking down old MS pipe and S&F new MS pipe 25 mm dia as per existing shape and specified shown on drg and directed .

Removing old worn out shoe and S & F new hard rubber shoe of best quality complete all as shown on drg and as directed.

M&L for painting with one coat of synthetic enamel black paint including preparation of surfaces of shoe rack steel complete all as specified and directed.

REPAIR TO TEAPOY VERANDAH, Drg No. FD-1118 & 35 (M) Removing of unserviceabletop and S & F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick TW beading all-round the teapoy verandah.

Removing of old unserviceable conduit pipe and S&F of 19mm dia MS conduit pipe including one coat of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

Removing of old existing unserviceable side strip & S&F of new side strip made of 25 mm x 3 mm flat iron mild steel, including making hole complete all as specified and directed.

Removing of old existing unserviceable long strip & S&F of new long strip made of 25 mm x 3 mm flat iron mild steel, including making hole complete all as specified and directed.

S&F of rubber shoe superior quality for teapoy verandah all as directed.

M&L for painting with one coat of synthetic enamel black paint including preparation of surfaces of teapoy verandah complete all as specified and directed.

REPAIR TO TABLE DRESSING LADIES, Drg No. FD-251, 32, 378 Dismantling/ taking out carefully old existing broken top of table dressing ladies of any description, in any position and with S&F new top table dressing ladies of 18mm thick pre-laminated particle board exterior grade all as shown on drawing , specified and directed.

Dismantling/ taking out carefully old existing broken side of table dressing ladies of any description, in any position and with S&F new side of table dressing ladies of 18mm thick pre-laminated particle board exterior grade all as shown on drawing , specified and directed.

Replacement of side glass 5.00 mm thick shutter with approved aluminium channel complete all as shown on drawing, specified and as directed .

Replacement of bottom 12mm thick commercial ply all as directed.

Replacement of U/S mirror 5mm thick with S&F new 5mm thick mirror 365 mm x 1220 mm x 5 mm thick all as specified and directed.

Replacement of back frame with S&F new back frame of 6mm commercial ply and connected components made out of 45mm x 40mm teak wood all as shown on drawing , specified and directed.

Replacement of chromium plated knob 25 mm dia, best quality and as approved by Engr-in-Charge.

Replacement of 12mm thick 900 mm x 380 mm commercial back ply of box fixed with screws and nail all specified and as directed.

Replacement of new drawer of table dressing ladies as on drawing, specified and as directed.

Replacement of legs of table dressing ladies of 1st class HW teak wood all as shown on drawing, specified and as directed.

Replacement of long rail to leg frame work of table dressing ladies of Ist class H.W. MP Teak wood all as shown on shown on drawing, specified and as directed.

Replacement of short rail of frame work to leg of 1st class HW teak wood of table dressing ladies all as shown on drawing, specified and as directed.

M& L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table dressing ladies over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIRS TO TABLE DRESSING GENTs, Drg No. FD-230, 379, 394 Dismantling/ taking out carefully old existing broken top of table dressing gents of any description, in any position and with S&F new top table dressing gents of 18mm thick pre-laminated particle board exterior grade including beading all as shown on drawing , specified and directed.

Dismantling/ taking out carefully old existing broken bottom of table dressing gents of any description, in any position and with S&F new bottom of table dressing gents of 18mm thick pre-laminated particle board exterior grade including beading all as shown on drawing , specified and directed.

Dismantling/ taking out carefully old existing broken side (left/ right) of table dressing gents of any description, in any position and with S&F new side (left/ right) of table dressing gents of 18mm thick pre-laminated particle board exterior grade including beading all as shown on drawing , specified and directed.

Replacement of back ply of 12 mm thick all as shown on drawing , specified and directed.

Replacement of drawer with S&F new drawer made to shape all as shown on drawing , specified and directed.

Replacement of knob with S&F new chromium plated knob 25mm dia all as specified and shown on drg.

Replacement of mirror of size 380 mm x 160 mm x 5 mm thick all as specified and shown on drg.

Replacement of back ply of mirror frame and S&F new back ply of mirror frame 6mm thick commercial all as specified and shown on drg.

Replacement of hanging key plate of mirror frame/ rectangular box and S&F new hanging key plate all as specified and shown on drg.

M&L for painting with one coat of synthetic enamel paint including preparation of surfaces of table dressing gents complete all as specified and directed.

REPAIR TO SIDE BOARD, Drg No. FD-261 Removing of old U/S top and S & F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white including 4 mm thick TW beading all as specified and directed.

Removal of old unserviceable existing back of side board and S&F new back ply of 6mm thick commercial plywood of existing size complete all as specified and shown on drawing.

Removal of old unserviceable/ broken legs and S&F new legs of 1st class hard wood (Shisham) of existing shape and size complete all as specified and shown on drawing and as directed.

Removal of old unserviceable/ broken bottom long rail and S&F new long rail of of 1st class hard wood (Shisham) of existing shape and size duly planned and smooth complete all as specified and shown on drawing.

Removal of old unserviceable/ broken bottom short rail and S&F new short rail of of 1st class hard wood (Shisham) of existing shape and size duly planned and smooth complete all as specified and shown on drawing.

Removal of old unserviceable/ broken sides of side board and S&F new sides of 18 mm thick pre-laminated particle board exterior grade as per existing shape & size complete all as specified and shown in drawing .

Removal of old unserviceable/ broken partition of side board and S&F new partition of 18 mm thick pre-laminated particle board exterior grade as per existing shape & size complete all as specified and shown in drawing .

Removal of old unserviceable/ broken shelf of side board and S&F new shelf of 18 mm thick pre-laminated particle board exterior grade as per existing shape & size complete all as specified and shown in drawing .

Removal of old unserviceable/ broken shutter of side board and S&F new shutter of 18 mm thick pre-laminated particle board exterior grade as per existing shape & size including 4 mm thick TW beading complete all as specified and shown in drawing .

Removal of old unserviceable/ broken existing drawer components of side board and S&F new drawer components (front,back & sides,shelf) as per existing shape and size complete all as specified and shown in drawing.

Replacement of chromium plated knob 35/ 40mm dia, best quality and as approved by Engr-in-Charge.

M& L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of side board except bottom over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO CHAIR WRITING/ CBA Drg No. FD-220, 202, 207, 271, 280 Re-canning of chair writing with 2 mm wide half round new plastic cane in Godrej pattern Make- saha or equivalent brand as approved by GE.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of chair writing/ CBA over and including a coat of wood filler comlpete all as specified and as directed.

REPAIR TO CHAIR EASY WITH CUSHION, Drg No. FD- 229/ 358 Removing old unserviceable polyurethane foam from seat and supply and fixing new polyurethane foam 50mm thick seat (density not less than 32 kg/cum) covered with leatheriest rexene of superior quality as per existing shape and size and as directed.

Removing old unserviceable polyurethane foam from back rest and supply and fixing new polyurethane foam 50mm thick back rest (density not less than 32 kg/cum) covered with leatheriest rexene of superior quality as per existing shape and size and as directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of chair easy over and including a coat of wood filler & tightening of all loose components all as specified and as directed.

REPAIR TO SIDE RACK STEEL 3/4 SPACES, Drg No. FD-1023, 97 (M) M&L for preparation of existing steel surfaces of rack steel and painting with one coat of synthetic enamel paint on steel rack by spray gun complete all as specified and directed.

Taking down old unserviceable steel nut and bolts and S&F new mild steel nut and bolts of shape & size as per existing and as directed.

Repair to Bench Parachute wooden to sit 12 Para Troppers with complete equipement size 10’x4.5’ M&L for one coat of synthetic enamel paint of existing colour of Bench Parachute including preparation of surfaces after tightening of all loose components of bench parachute complete all as specified and directed.

Taking down old unserviceable seat planks and S&F new Seat Planks of required size all as specified and directed

Taking down old unserviceable seat planks and S&F new Back Planks of required size all as specified and directed

Taking down old unserviceable seat planks and S&F new Back Support of required size all as specified and directed

Taking down old unserviceable seat planks and S&F new Bottom Support of required size all as specified and directed

Taking down old unserviceable seat planks and S&F new Side Support of required size all as specified and directed

Removing old U/S top from Bench Parachut packing and S & F new 18 mm thick BWR ply top/ office (10 feet x 2 feet) with a frame beading all round as specified and directed.

REPAIR/ REWEAVING OF CHARPOY GI PIPE, Drg No. FD-220 (M) Dismantling / taking down of existing unserviceable newar from GI pipe charpoy and weaving both ways with superior quality of nylon newar 50 mm to 55mm wide ( weight not less than 1.50 Kg per charpoy) including tightening of all components of charpoy in the true position complete all as specified and and shown on drg.

Removing of old unserviceable check nut of G.I. charpoy and replacement with new GI Check nut, 9mm thick suitable for charpoy GI Pipe 32 mm bore pipe complete all as specified & directed.

Removing of old unserviceable elbow of charpoy GI pipe and S&F three way GI elbow 32 mm bore medium grade, ISI marked complete all as specified & directed.

REPAIR TO TABLE EXAMINATION 3' X 2', Drg No. FD-165 (M) Removing of old U/S top and S & F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick TW beading all-round the table examination and all as specified and shown on drg.

M&L for repair and tightening of all loose components of table examination comlpete all as specified and as directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table examination over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO TABLE BED SIDE, Drg No. FD-248/ 276 Removing of old U/S top and S & F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick TW beading all-round all as shown on drawing & as directed.

Taking down old U/S side of table bed side and S&F new side of 18 mm thick pre-laminated particle board exterior grade ISI marked as per existing shape and size all as specified and as directed.

Taking down old U/S shelf of table bed side and S&F new shelf of 18 mm thick pre-laminated particle board exterior grade ISI marked as per existing shape and size all as specified and as directed.

Taking down of old U/S back of table bed side and S&F new back of 6mm thick ply wood commercial BWR with required size of screws all as specified and directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table bed side over and including a coat of wood filler comlpete all as specified and as directed.

REPAIR TO TABLE WOODEN 1520 X 860 X 760 MM, Drg No. FD- 25 (I) Removing of old U/S top and S & F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick TW beading all-round the table wooden as per existing shape and size all as directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces after repair and tightening of all loose components of table wooden over and including a coat of wood filler comlpete all as specified and as directed.

REPAIR TO TABLE BED SIDE (MAP) , Drg No. FD/E6/MAP/15 Taking down old unserviceable top of Tabel bed side and S & F new top of 18mm thick prelaminated particle Board exterior grade as per existing shape and size all as specified and directed.

Taking down old unserviceable bottom of Tabel bed side and S & F new bottom of 18mm thick prelaminated particle Board exterior grade as per existing shape and size all as specified and directed.

Taking down old unserviceable side of Tabel bed side and S & F new side of 18mm thick prelaminated particle Board exterior grade as per existing shape and size all as specified and directed.

Taking down old unserviceable back of Table bed side and S & F new 6mm thick plywood commercial type BWR quality as per existing shape and size complete all as specified and directed.

Taking down old unserviceable upper drawer of Table bed side and S & F new upper drawer of 18mm thick prelaminated particle Board Ist grade and bottom of drawer shall be of 6mm thick ply wood commercial type as teak wood runner as per existing shape and size complete all as specified and directed.

Taking down old unserviceable lower drawer of Table bed side and S & F newlower drawer of 18mm thick prelaminated particle Board Ist grade and bottom of drawer shall be of 6mm thick ply wood commercial type as teak wood runner as per existing shape and size complete all as specified and directed.

Replacement of chromium plated Handle of best quality as per existing shape and size complete all as specified and directed.

Removing of old u/s Telescopic channel of pull out tray and supply & fix new telescopic sliding channel as per existing size complete all as specified and directed.

Taking down old broken 18 mm MS square pipe and S & F 18 mm MS square pipe of 18 guage black powder coated in duly wleding carefully all as directed.

M&L for painting to frame of table bed side with one coat of black synthetic enamel paint after preparation of surface complete all as specified and directed.

REPAIR TO CHAIR DINING OFFICER WITH CUSHION, Drg No. FD/E6/MAP/10 (R) Taking out existing old unservicable foam cushion and S & F new foam cushion 75mm thick, 40 density duly upholded/ covered with tapestry cloth of super quality as per existing shape & size and rest all as directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of chair dining officer over and including a coat of wood filler comlpete all as specified and as directed.

REPAIR TO CHAIR WRITING STEEL WITH CUSHION, Drg No. FD- 360 Removing old U/S polyurethane foam from seat and supply and fix new polyurethane foam 75 mm thick seat (density not less than 40-45 kg/cum) covered with leatheriest rexene of superior quality as per existing shape and size and as directed.

Removing old U/S polyurethane foam from back rest and supply and fix new polyurethane foam 75 mm thick back rest (density not less than 40-45 kg/cum) covered with leatheriest rexene of superior quality as per existing shape and size and as directed.

M&L for painting with one coat of synthetic enemal paint to all exposed surface of chair writing with superior quality of black paint all as specified and directed.

Removing old U/S PVC shoe and S&F hard rubber shoe of superior quality as per existing shape and size for chair writing steel with cushion all as specified and directed.

TUCK WELDING : M&L for jointing of broken steel part by tuck / gas welding before apply of painting work as specifed and directed

M/S SUMESH FURNITURE

R K SINGH AND CO

M/S DURGA ASSOCIATES