Refurbishment of the Revenue and D.M. Department, E-Block, Assam Secretariat (Relief and Rehabilitation Branch, Registration Branch, Reforms Branch) (Part-I)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Float glass panes 1 4 mm thick glass pane (weight not less than 10kg/sqm).

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Supplying fitting and fixing Johnson Zebra Roller Blinds(Combi Blackout) make and shade, design as per choice complete as specified and directed by the department at all levels.

Providing erecting cutting and fixing of 420 mm depth free standing file cabinate/rack with laminated finished,erected/making to be made with 19mm thick Greenply plywood on all frame structure and required partition with self member as per required height with providing fixing of edge binding in all plywood edges cuitting and pasting with fixing for 1.5mm thick decorative laminated sheet in both side of ply surface including all hardware fittings like,nails,fevicol,pesting tap, handle,lock,hinges,tower bolt,magnate catcher etc. as a complete with all necessary required materials and labour as directed by the concern department.

Providing & finishing of 35mm thick flush door bothside with 6mm plyboard pasting and 1.0mm decorative laminate Pasting finished with PU polish as per Architects instructions and provided with Door closure 125mm long 2.9mm thick Heavy duty S.S bearing hinge.Mortice Lock with Handle(all fittings to be of GODREJ make as specified in the drawings) complete with all other necessary hardwares as per design specified and directed by the department/consultant.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on both sides

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 125 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing fitting fixing PVC panels for wall and ceiling (plain) with material & installation including labour,carriage etc as directed and specified.

Providing fitting and fixing of Wooden Flooring (Nobile Laminate flooring, BVG) with under layer of 6mm materials & installation including labour, carriage etc as directed and specified

Providing fitting and fixing work station table of green ply board, sun mica fitted with brass fittings complete in all respect as specified and directed by the deptt.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m²

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. (i)20 mm nominal dia Pipes

25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 80 mm nominal dia Pipes

100 mm nominal dia Pipes

Providing and fixing 2 in 1 Contessa Neo Advance Hindware F730054 Bib Cock

Providing and fixing 2feet PVC connection pipe.

Providing and fixing Health Faucet 1.25 Mir Abs Rubbit Cl. Sys Hindware F160027

Providing and fixing 5'' SS grating

Providing and fixing parryware Droplet pillar cock

Providing and fixing Jaquar Soap Dish Holder

Providing and living Waste Coupling 171 Parry ware

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. GROUP C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX125mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 or 2 Module.

3 Module.

6 Module

8 Module

12 Module

Supplying and drawing of UTP 4 Pair CAT 6 Cable in the existingsurface/recessed/recessed steel/PVC conduit as required. 1 Run of Cable

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 200 A,36KA,FPMCCB

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Supplying and installation of 1200 mm Service value including parts and accessories Electric Ceiling type fan as per IS 374 as specified and directed by the Department. (ORIENT/CROMPTON /BAJAJ or equivalent make)(GEM PRODUCT ID 5116877-83928411529)

Supplying and fitting fixture type 1*4, 36W LED Surface Ceiling Light in the existing false ceiling/gypsum board Rev 1 as specified and directed by the Department..(GEM PRODUCT ID 5116877-74056306302) (ORIENT/CROMPTON/LEDURE or equivalent make)

Supplying including installation of circuit protection device and accessories 63 A 3 Pole with 3PP 415 V Miniature Circuit Breakers - IS 60898-1:2002 as specified and directed by the Department.(GEM PRODUCT ID 5116877-2238637684)(SCHNEIDER/HAVELL's/C&S or equivalent make)

Supplying including installation of 3J3 CAT6 U/UTP Patch Cord of 3.0 Mtrs.length as Specified & Directed by the Department.(GEM Product ID 5116877-32478887937)

Supplying including installation of RJ 45 based Surge Supressor as Specified & Directed by the Department.(GEM Product ID 5116877-26019079636)

Supplying including installation of Surface Mount box along with face plate as Specified & Directed by the Department.(D-Link NBB-011)

Supplying including installation of CAT 6 U/UTP Cat 6 Patch Panel as Specified & Directed by the Department.(GEM Product ID 5116877-78117169280)

Supplying including installation of 16 A. 250V PP Single Multi Pin Electrical Top for industrial application as specified and directed by the Department. (GEM PRODUCT ID 5116877-143845831) (GREATWHITE/HAVELL's/C&S or equivalent make)

Supplying with fitting and fixing of Single Phase Modular Motor Starter switch MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA). MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST). SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying including installation of Home Distribution and Conditioning Systems and Equipment and Heating and Ventilation and Air Circulation Matelic Mount Suitable for Air Conditioner (Accessories) as specified and directed by the Department(GEM PRODUCT ID 5116877-74236143769) (VOLTAZ/CARRIER/BLUESTAR or equivalent make)

Supplying including installation of 2 Ton with 5 BEE Star rating Split Type Air Conditioners including Green AC and Air Circulation Cooling Equipment and Parts and Accessories as specified and directed by the Department. (GEM PRODUCT ID 5116877-32630235651)(VOLTAZ/CARRIER/BLUESTAR or equivalent make)

Supplying including installation of Horse Distribution and Conditioning Systems and Equipment and Componets Heating and Ventilation and Air Circulation Extra Refrigerant Pipe for Air Conditioners (Accessories) as specified and directed by the Department (GEM PRODUCT ID 5116877 93181769304) (PANASONIC/CARRIER/GODREJ or equivalent make)

Supplying including laying of 3 Core 2.5 Sq.mm.PVC Copper Circular Sheathed Cable with flexible conductor to be used as interconnecting communication cable between indoor & outdoor units as per 15:694 as Mtr. specified and directed by the Department. (GEM PRODUCT ID 5116877 65167284597) (POLYCAR/KEI/PLAZA or equivalent make)

Please Enable Macros to View BoQ information