Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹75.8 LAccepted-AOC NO 9A VINAYAKANILAYA KANAKA GANAPATHI STREET OM SHAKTHI LAYOUT KANAKAGIRI HORAMAVU POST BANGALORE 560 043 | BENGALURU URBAN | KARNATAKA | 560043 | L1 | Accepted-AOC LOWEST QUOTED HENCE ADMITTED | |
| 2 | L2₹77.5 L+₹1.7 L (2.28%)Rejected-AOC SITE NO 29 30 1ST CROSS NAGAPPA REDDY LAYOUT KAGGADASAPURA CV RAMAN NAGAR PO BANGALORE 560 093 | BANGALORE | BANGALORE | KARNATAKA | 560093 | L2 | Rejected-AOC NOT LOWEST QUOTED HENCE NOT ADMITTED | |
| 3 | L3₹78.4 L+₹2.5 L (3.36%)Rejected-AOC NO 45 5TH CROSS MALLAPPA LAYOUT BABUSAPALYA KALYAN NAGAR BANGALORE 560043 | BENGALURU URBAN | KARNATAKA | 560043 | L3 | Rejected-AOC NOT LOWEST QUOTED HENCE NOT ADMITTED | |
| 4 | L4₹83.6 L+₹7.8 L (10.2%)Rejected-AOC NO 422 CHURCH STREET NEW THIPPASANDRA BANGALORE 560075 | BANGALORE | BANGALORE | KARNATAKA | 560075 | L4 | Rejected-AOC NOT LOWEST QUOTED HENCE NOT ADMITTED | |
| 5 | L5₹98.8 L+₹23.0 L (30.4%)Rejected-AOC | L5 | Rejected-AOC NOT LOWEST QUOTED HENCE NOT ADMITTED |
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
12 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL MANOJ NEGI
CWE AF North Bangalore Bellary Road JC Nagar Post Bangalore 560006
ADDN/ALTN/ IMPROVEMENT TO SNCOS MESS OF MTC AT CHAFB UNDER GE (AF) BANGALORE
2023_MES_632923_1
87418CWEAFNBAN
Open Tender
Civil Works
Item Rate
240 days
GE (AF) BANGALORE
AS PER NIT
7 documents required · 7 mandatory
₹1,000
GE (AF) BANGALORE
₹1.6 L
Yes
15 Mar 2024
15 Dec 2023
19 Feb 2024
15 Dec 2023
12 Feb 2024
29 Jan 2024
16 Dec 2023 - 27 Dec 2023
Amount
M & L for taking down chowkhats or frames not exc 1.5 sqm with shutter (without taking off shutter from the frames) including taking out hold fasts and PCC bed block all as specified and directed.
S & F factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS wire tube supplied and fixed in opening as per specification and drawing complete all as specified and directed.
S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), wtih 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on other face in frame at site as per specification & drawing all as specified and directed.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm long extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed.
S&F 75mm butt hinge, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.
M & L for dismantling floor hearth or wall tiling including cement mortar bedding but not backing coat removing serviceable tiles to store and rubbish off premises etc complete all as specified and directed.
M&L for double charged vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm dark shade, in floors etc laid over and including 15mm thick screed bed or bedding layer of CM (1:4), set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and directed.
M & L for double charged vitrified cermic tiles 10mm thich (Square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm dark shade laid over and including 10mm thick rendering in CM (1:3) on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.
M & L for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed.
M & L for non skid ceramic tiles coloured of size 300 x 300 x 7 to 8mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles with 15mm screed bed 1:4 for laying floor finishes complete all as specified and directed.
M & L for glazed ceramic tiles coloured of size 450X 300X 7mm thick as vertical surface set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigment to match the shade of tiles with 10 mm thick rendering 1:3 for laying wall finishes complete all as specified and directed.
M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed or bedding 20mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M & L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and table top for fixing wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite shade including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
M & L for 8 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed. NOTE : The rate inclusive of scaffolding and necessary arrangements
M & L for demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.
M & L for demolition of brick/ PCC block work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings etc.complete all as specified and directed.
M & L for demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and jointed in cement mortar complete all as specified and directed.
M&L for Precast coloured cement concrete pavement tiles of size 400 x 400 mm and minimum thickness 12-15mm and above laid over screed bed or bedding layer of CM 20mm thick in CM 1:6 complete all as specified and directed. Make: Eurocon/ Duracrete/ Ultra.
M & L for 75mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection/ sub base of floor complete all as specified and directed.
M&L for 100mm thick cement concrete type B-2, 1:2:4 (using 40 mm graded stone aggregate) as in sub base flooring finishing even and fair complete all as specified and directed.
M&L for 25 mm thick cement concrete type B0 1:2:4 (using12.50 mm graded stone aggregate) as in levelling concrete finished even and fair to receive floor finishes complete all as specified and directed.
M&L for preparation of PCC surface completely remove all sand particles and laying HDPE 80 Waterproofing Membrane over PCC sub base overlap all membrane end laps and cut edges by a minimum 75mm than on for overlap surface of first membrane roll end using a hot air gun and scrapper ensuring that the membrane surface at roll end is clear and free from any loose material and water/moisture to facilitate proper bonding of HDPE (DOUBLE- SIDED) TAPE, apply HDPE (DOUBLE-SIDED) TAPE to the 75 mm wide lap along the entire 1.2 m length of the end lap, then remove the paper cover and stick the lap of the succeeding membrane over it again ensuring a continuous bond is achieved without creases and roll firmly with a heavy roller and hand pressure, during damp conditions (e.g. water spillage), the selvedge and SMARTCARE HDPE (DOUBLE-SIDED) TAPE shall be gently warmed using a hot air gun or similar to remove moisture or condensation and improve initial adhesion, between two concrete pours, HDPE 80 membrane should extend a minimum 300 mm beyond the slab edge complete all as per manufacturer's instruction complete and all as specified and directed.
M & L for Powder coated Aluminium windows of three tracks outer frame top, side sections, bottom frame (track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wire mesh (total 3 nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40X18X1.5mm including glass 4 mm thick and aluminium wire cloth, 0.45mm nominal dia wire and average width of aperture 1.40mm complete all as specfied and directed.
S & F powder coated Aluminium frame work for grills Deco-grill Model DG-104(10mm) making shape and riveted with rivets and fixed with suitable channel complete including necessary fixing arrangements etc.,complete all as specified and directed.
M & L for 18 to 19mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination and fixed with screw and continuous (piano) hinges, 125mm long hasp and staple and and prepared kitchen cabinet with shutter (and one or two shelf as per site requirement for storage) and hanging on wall and also fixed to timber frame work where required all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as per architectural drawings and the directions of Engineer-in-charge complete all as specified and directed.
S&F aluminium door shutters (any type, normal or sliding), aluminium section powder coating (minimum thickness of powder coating 50 micron) weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by the Engr-in-Charge.
S & F 12 mm prelaminated particle board, interior grade, both sides with decorative choice laminations complete all as specified and directed.
S & F 5.5 mm thick sheet glass, ordinary quality, fixed with necessary glazing clips, in squares exceeding 0.5 Sqm in each panel complete all as specified and directed.
M & L for taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specified and directed
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar 1:6 and 5mm thick in cement mortar 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement complete all as specified and directed. (Note : Supply only WPC shall be measured and paid separately)
Supply only water proofing compound.
M&L for rendering 5mm thick on concrete surfaces of ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.
M&L for Pre-cast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar type C1 (1:3:6) set in cement mortar (1:6) all as specified and directed.
M & L for dismantling structural steel framed trusses etc n exc 10m complete all as specified and directed.
M & L for dismantling structural steel work including door gates but excluding framed work complete all as specified and directed.
M & L for dismantling plain or corrugated steel sheeting any guage, thickness including roof covering etc complete all as specified and directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete as specified and directed.
S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick as in ridge of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and directed.
S&F roof trusses (framed), trussed, purlins,crane gantries, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. fe-410 (gde E-250) complete all as specified and directed.
S&F plates (plain or chequered) channels, distance pieces, cleats etc. square cut or notched including riveted, bolted or welded attachment complete all as specified and directed.
M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.similar work conforming to Fe.290.Gde-E-165.all as specified and as directed by Engr-in-Charge.
S & F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs including 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed
S&F 20mm CPVC Ball valve fixed in position, complete all as specified and directed.
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, including dismantling of old pipe (sewage/ rain water/ any type) complete all as specified and directed .
S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, including dismantling of old pipe (sewage/ rain water/ any type) complete all as specified and directed .
S & F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
S & F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs 10 Ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern), EWC White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc complete all as specified and directed.
S&F plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S & F wash basin vitreous china white flat back of size 550x400mm including pillar taps 15mm dia fancy type, cast copper alloy, with capstan heads, chromium plated, 32mm brass chromium plated waste fittings, PVC waste pipe of suitable size, plug and porcelin stopper, CI brackets, cutting for and pinning in ends of brackets or erecting stand including taking down the old unserviceable one, complete all as specified and directed.
S&F snow white colour vitreous china wash basin oval type of size 560 X 400 mm including brackets, 32mm dia CP waste coupling, waste pipe connection complete all as specified and directed.
S&F 15 mm bore pillar cock with swan neck spout and aerator (right) chromium plated all as specified and directed.
S&F snow white colour vitreous china urinals of size 420x395x635 mm including brackets, 32mm dia CP waste coupling, waste pipe connection complete all as specified and directed.
S&F urinal Spreader incl fixing with 15mm dia pipe all specified and directed.
S & F for PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.
S & F in repairs 15 mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specifed and directed.
S & F in repairs 15 mm bore stop valves, fancy type, chromium plated, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specifed and directed.
S & F 15 mm bore stop valves, fancy type chromium plated with long shank and cup (concealed type), fixed, complete all as specified and directed. Make : Cera/ JOHNSON/ESS-ESS/ARK
S & F CP two way bib cock with all accessories completed all specified and directed. Make : Cera/ JOHNSON/ ESS-ESS/ ARK etc.
S & F CP shower rose with or without swivel joints 125 mm size including fixing to steel pipe or union 15 mm bore complete all as specified and directed.
S & F Chromium plated brass 15 mm dia health faucet with 8 mm dia, 1.2m long flexible tube with wall hook complete necessary fixing arrangements etc complete all as specified and directed. Make : Jaquar/Cera/Ess Ess
S&F Stainless steel soap dish of approved make, complete all as specified and directed.
S&F Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm between flanges, complete all as specified and directed.
S&F Sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed
M&L for precast cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in landing, cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces, set in cement mortar 1:6 with plain fair faces complete with joints to match all as specified and directed.
S & F High strength, deformed steel TMT 6mm to 8mm dia, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.
M & L for taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.
M & L for taking up or down steel tubing and connections 15mm bore complete all as specified and directed.
S & F 15mm bore steel water tubing Meduim grade’ tubes, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S & F 20 mm bore steel water tubing medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.
M & L for taking down shutters of any description exc 1 sqm but nexc 2 sqm each incl easing and adjusting and re-fixing in the same opening complete all as specified and directed.
S & F for butt hinge 100mm , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed as in repairs, type C-21 complete all as specified and directed.
S & F for aluminium handles 150 mm long, cast type, anodised fixed as in repairs, complete all as specified and directed.
S & F for aluminium, anodised, barrel tower bolts 150 mm long of extruded section fixed as in repairs , complete all as specified and directed.
S & F for aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, fixed as in repairs complete all as specified and directed.
M & L for taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n. exc 4 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-Charge.
M & L for taking down shutters of any description exc 1sqm and n exc 2 sqm each all as specified and directed by Eng-in-Charge
S&F Pressed steel frames for doors size 125 x 60 mm with one or more including necessary fixing lugs, hinges, lock strike plate,etc., complete as specified and directed.
S&F Pressed steel frames for doors size 105 x 60 mm with one or more including necessary fixing lugs, hinges, lock strike plate,etc., complete as specified and directed.
M & L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as filled in pressed steel door frames etc complete all as specified and directed.
S&F second class hard wood 35mm thick plain framed panelled shutter (2 panels) with lock rail and panelled of 9mm (BWP ) commercial ply or 12mm veneered particle board with commercial veneering on both face the size of rail and style as per (IS 1003 PART I) kiln seasoned and chemically pressure treated section exc 13 and not exc. 25 sqcm complete all as per specified and directed.
S&F 35 mm thick 2nd class hard wood glazed and skeleton factory made shutter open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and directed.
S & F for 100mm long butt hinges cold rolled mild steel medium weight all as specified and directed.
S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.
S&F mild steel helical door spring 300mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.
S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor
S&F in repair 20 mm dia curtain rods fancy type of aluminium anodised powder coated with fixing brackets (both sides), stops, rollers etc complete all as specifed and directed.
M&L for glazed earthenware coloured tiles 200 x 100 mm and 6 to 8 mm thick including 10mm thick rendering in CM (1:3) on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade all as specified and directed.
M&L for preparing new plastered surfaces of wall and applying two coats of oil emulsion distemper through mechanical means over one coat of chalk whiting primer over and including 3mm thick wall care putty all as specified and directed.
M & L for complete removal of existing treatement on wall and applying two coats of oil emulsion distemper through mechanical means over one coat of chalk whiting primer over and including 3mm thick wall care putty all as specified and directed.
M & L for preparing new plastered surfaces of ceiling and applying two coats of oil emulsion distemper over one coat of chalk whiting primer over and including 3mm thick wall care putty all as specified and directed.
M & L for complete removal of existing treatement on ceiling surface and applying two coats of oil emulsion distemper through mechanical means over one coat of chalk whiting primer over and including 3mm thick wall care putty all as specified and directed.
M & L for preparation of old decorated surfaces of ceiling and applying one coat of white wash all as specified and directed.
M & L for preparation of new plastered surfaces of walls and applying two coats of cement based paint through mechanical means all as specified and directed.
M&L for preparation of old decorated surfaces of walls and applying one coat of of cement based through mechanical means paint all as specified and directed.
M&L for preparation of new or previously untreated wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer including filler coat to bring the surface smooth all as specified and directed.
M & L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
M & L for preparation of old existing wood or wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for preparation of old existing steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for dismantaling/ complete removal of existing tarfelt sheet treatment on roof all complete as specified and directed.
M & L for demolition of cement concrete padding over roof, any thickness, including plastering (full thickness removed or only a part thereof) complete all as specified and directed.
M & L for providing, cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in roof, kerbs, padding or mud stops, rounded or chamfered on edges including formwork all as specified and directed.
M & L for rendering 15mm thick in cement mortar 1:3 mixing with water proofing compound on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified as directed. Note : Supply of water proofing compound measured and paid separately.
Supply only integral water proofing compound.
M&L for water proofing treatment on horizontal and vertical surfaces with applying of oil bound bitumen primer @0.20 kg/ Sqm and providing 3-4mm thick APP modified water proofing membrane weighing not less than 4.0 Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 grm/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650 N/Sqcm and 350 N/Sqcm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch on application including minimum 10cm side over lap and 15 cm end lap applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.20 Kg/Sqm finished with solar reflective bituminus paint/primer @ 0.10 kg per sqm all as specified and directed. (for Roof Treatment)
M & L for removing building materials etc. to a distance of 5 KM beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and directed.
S&F alluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frame glazed putty or fixed with beads up to 4 storeys complete all as specified and directed.
S&F in repairs aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.
M&L for machine pressed precast concrete interlocking coloured rubber moulded paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade laid over and including 50mm thick M sand cushion all as specified and directed.
M&L 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and directed.
M&L for double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass and other parts made of heavy duty mild steel, complete all as specified and directed.
M&L for 300mmx300mm of size and 20-22mm thick rubber moulded coloured chequered cement concrete tiles jointed with grey cement and pigment laid in floor over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M & L for dismantling barbed wire fencing of any description complete all as specified and directed.
M & L for dismantling of post or struts (wod or steel or RCC) any section including taking out embeded portion and making good disturbed ground, post embeded in concrete complete all as specified and directed.
M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
M & L for demolition of cement concrete of any description and in any position not specially provided for all as specified and as directed.
M & L for plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in mass filling and mass concrete in channel, drain complete all as specified and directed.
M & L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in surface channel, drain, all as specified and as directed.
M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc all as specified and directed.
M & L for dismantling of hardcore (stone bolders/brick bed) completely as found under floor complete all as specified and directed. Note : Water accumulating under the floor due to raising of water table will be dewatered/ pumped out completely before carrying out the cushion layer of sand filling under floorings and hard core. The rate is deemed included for dewatering.
M&L Sand cushion (50 to 100mm compacted thick) filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface (using broken or boulders) complete all as specified and directed.
M & L for taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings & fixtures such as switches, ceiling rose, pendants, regulators, sockets, ceiling roses,pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified & as directed.
M & L for taking down Ceiling fan of any capacity/ any size, painting of ceiling fans with two coats of white paint, including refixing of down rod and ceiling fans with connecting of cable all as specified and as directed.
M & L for taking down Exhaust Fan, from walls and refixing the same including connecting up all as specified and directed.
M & L for taking down Geyser, from walls and refixing the same including connecting up complete all as specified and directed.
S & F for point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in existing stone/ brick masonary, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/ sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :- One light controlled by one single pole 5 Amps switch NOTE : Chases/ groove cutting in stone walls/ brick wall/ block masonary walls as required for concelaed wiring shall be measured and paid separately under relevant item.
All as per item No 134 above but One Ceiling fan point controlled by one single pole 5 Amps switch
All as per item No 134 above but One Exhaust fan point controlled by one single pole 5 Amps switch
All as per item No 134 above but One 3 pin switch socket out let point 5 Amps switch on independent board
All as per item No 134 above One 3 pin switch socket out let point 5 Amps switch on same board
S & F for point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.50 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in existing stone/ brick machinery, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 2.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following NOTE : Chases/ groove cutting shall be measured and paid separately under relevant items. NOTE : Chases/ groove cutting in stone walls/ brick wall/ block masonary walls as required for concelaed wiring shall be measured and paid separately under relevant item.
Supply and fix Modular switch, 1 Module single pole one way 10 Amps complete all as specified and directed.
Supply and fix Modular switch, 1 Module single pole one way 16 Amps complete all as specified and directed.
Supply and fix modular socket , 2 Module 6 Amps, 2/3 pin, 240 volts Ac 2/3 pin complete all as specified and directed at site.
Supply and fix modular socket , 2 Module 6/16 Amps, 2/3 pin, 240 volts Ac 2/3 pin complete all as specified and directed.
Supply and fixing of modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified and directed..
Supply and fixing of modular white cover plate with frame, 1 module complete all as specified and directed.
Supply and fixing of modular white cover plate with frame, 2 module complete all as specified and directed.
Supply and fixing of modular white cover plate with frame, 3 module complete all as specified and directed.
Supply and fixing of modular white cover plate with frame, 4 module complete all as specified and directed.
Supply and fixing of modular white cover plate with frame, 6 module complete all as specified and directed.
Supply and fixing of modular white cover plate with frame, 8 module complete all as specified and directed.
Supply and fixing of metal flush box 1/2 module complete all as specified and directed.
Supply and fixing of metal flush box 3 module complete all as specified and directed.
Supply and fixing of metal flush box 4 module complete all as specified and directed.
Supply and fixing of metal flush box 6 module complete all as specified and directed.
Supply and fixing of metal flush box 8 module complete all as specified and directed.
Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.
Supply and fixing of LED Light fitting, 22 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with 2 core flexible copper conductor cable of suitable size from Ceiling rose. MAKE : CG/ HAVELLS/ WIPRO/ PHILIPS/ OSRAM
Supply and fix office LED Luminaires type 40 watts, LED 600 x 600 mm grid ceiling incl connecting up with PVC sheathed 1.5 sqmm 2 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.
Supply and fixing of LED Round lights 6 watt complete all as specified and directed. Make : CG/ BAJAJ/HAVELLS / WIPRO
Supply and fixing of LED Bollard light 10 watt complete all as specified and directed. Make : CG/BAJAJ/HAVELLS / WIPRO
Supply and fixing of Decorative Post Top light fitting 40 watt, 360 degree with IP 65 protection resistant complete all as specified and directed. Make : CG/BAJAJ/HAVELLS/WIPRO
Supply and fixing of LED 36 WATT building security light complete all as specified and directed. Make : CG/ BAJAJ/HAVELLS / WIPRO
Supply and fixing of wall mounted fan, 400 mm sweep with acessories complete all as specified and directed. Make : BAJAJ/HAVELLS /WIPRO/ POLYCAB /CG / PHILPS
Supply & fix Exhaust fan, steel body AC single phase 230 V of size 380 mm sweep, with louvers, blades & frame all as specified and directed.
Supply and fixing of Sheet metal enclosure with socket plug top and MCB, Single pole & neutral enclosure with a 2 pin & earth plug & socket with one single pole MCB 20 amps complete all as specified and directed.
M & L for cutting into or through the stone walls / brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed. NOTE : Chases/ groove cutting in stone walls/ brick wall/ block masonary walls as required for concelaed wiring as mentioned therein shall be measured under this item.
M & L for cutting chases, pinning in stone walls/ brick walls etc. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc, for concealed conduit wiring into or through the stone walls built in cement mortar or cement lime mortar and walls of cement concrete suitable for housing 25mm dia conduit pipe using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed. NOTE : Chases/ groove cutting in stone walls/ brick wall/ block masonary walls as required for concelaed wiring as mentioned therein shall be measured under this item.
S & F sub main wiring with two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 2.5 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed in stone wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary inc 2.5 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.
S & F sub main wiring with two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 4.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed in stone wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary inc 4.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.
S & F sub main wiring with two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 6.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed in stone wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary inc 6.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.
S & F sub main wiring with two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10 sqmm in and including non-metallic rigid PVC conduit and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary including 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.
S & F sub main wiring with four single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed in stone wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary inc 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one runs of PVC Conduit and Four run of copper conductor together taken as one length for measuring unit length.
S & F sub main wiring with four single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 6.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed in stone wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary inc 6.00sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and Four runs of copper conductor together taken as one length for measuring unit length.
M & L for earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised earth lead wire 4.00 mm dia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indiacted including testing on completion. Note: Earth lead upto 7.5m shall be deemed to included in the item.
S & F for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed for earthing etc. of size 4.00 mm dia galvanised iron or steel wire complete all as specified and directed.
S & F sheet metal enclosure for VTPN DB's double door TPN 04 ways suitable for 125 Amps MCCB Fixed in DB, deep drawn with 200 Amps rated copper bus bar 415 V including taking down old unserviceable complete all as specified and directed. Make : INDO ASIAN/ HAVELLS/ STANDARD/ CG
S&F sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 240V including taking down old unserviceable complete all as specified and directed.
S&F Sheet metal enclosure for DB's double door TPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 415V including taking down old unserviceable complete all as specified and directed.
S&F MCB TPN, 63 Amps, 415 V, C- series with breaking capacity of 10KA complete all as specified and directed.
S&F MCB SPN, 40 Amps, 240, C-series with breaking capacity of 10KA complete all as specified and directed.
S & F MCB SP, 6-40 Amps, 240V, C- series with breaking capacity of 10KA complete all as specified and directed.
S & F of MCCB 125 A, TP, 16 KA, Make : INDO ASIAN/HAVELLS/ L&T.
S & F of protection device Type 1+2 AC single pole and neutral, 1P+N 20kA complete all as specified and directed. Make: Havells/ Indo Asian/ Legrand /L&T.
S & F of LED 50 Watt Flood lights, Make : CG/ BAJAJ/HAVELLS / WIPRO
S & F of LED 100 Watt Flood light complete all as specified and directed. Make : CG/ BAJAJ/ HAVELLS / WIPRO
S & F of ceiling fan down rod of 3 feet length to be fixed at proposed false ceiling areas for lower downing of ceiling fan, including with fasteners, bolts, screws & nuts all as specified and directed.
S & F of Hot press moulded SMC Junction boxes, SMC base, SMC door, door fixed with hinges, door fixed with mechanical fastners, of size 300x 200x 105 mm Hinged Right complete all as specified and directed. Make : SINTEX or equivalent
S & F rigid PVC trunking white colour of 80 mm x 50mm along with bodies & with Flexible cover 65 mm as per OEM, LEGRAND fixing on stone walls / brick masonary walls /ceilings /floors etc. for running of all type of service / miscellaneous cables complete with fitting such as joints /Tee /elbow /coupler etc, including taking down old PVC cable Trunking all as specified and as directed. Make : LEGRAND or Equivalent makes NOTE : Chases/ groove cutting in stone walls/ brick wall/ block masonary walls as required for concelaed wiring shall be measured and paid separately under relevant item.
B5BUILDING SOLUTIONS
M/S Suresh Raju
Siddivinayaka Constructions
D NAGI REDDY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .