Tiruppur Corporation_Drilling of New Bore Well and Erecion of New Submersible Motor, Cable at Perumanai Christion colony area in Ward No 60.

Amount

Geophysical survey charges for locating bore well drilling etc., Complete

Drilling of bore well of size 150mm dia in any kind of soil or hard rock for requiring depth rig of heavey dudy compressor equpment mounted on on a vechile including conveyeince of all items in site fuel,cost, of labour charges and with one supprotiong vechile etc., complete as per standered specifications.

Supplying , Delivery and erection of pvc 150mm non presure casing pipe of 6mm thick in the bore well at topm level in a possition of projecting of 0.30m above ground level including Inserting Charges,conveyeince of all items in site cost of labour charges and with one supprotiong vechile etc., complete as per standered specifications.(Rate-457.00+329.36= 786.36)

UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure (Schedule-80)

50 mm UPVC

Supply and delivery of (75 x250m LPM)7.50 HP Bore well Submersible pump set conforming to IS 8034/2002 and Suitable for150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 StarRated capable of discharging noted LPM against head of water column due to all causes.The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SSimpeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pumpshall be directly coupled to a continous rated two pole suitable wet type vertical squirrelcage induction motor as per IS9283 /1995 as amended there after, suitable for operationin AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %

Supply of 4 sqm submercible cabel with ISI make etc., complete as per standard specification. (IS 694/1990)

Labour Charges for the erection of 7.50HP submersible pumpset in borewell/openwell including fixing and jointing submersible cable withproper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Add GST @ 18%

ATOMTECH LABS