Tender for construction of Watch room over the existing CISF Room/Customs Room, New CISF bunk near new pump house, improvement work to old CISF Bunk, Pump room at Bharathi Dock

1. Chipping / Hacking the existing concrete surfaces of Break water dence hacking with suitable tool/ machinery to the requiered width and applying cement slurry mixing bonding agent (Dr fixit or equivalent) To the places for the proposed Plinth Beam and as directed without damaging the near by existing structure, all as directed and as per site condition of work including all labour, tools, tackles,equipments,transport,fuel,etc, complete.

2. Dismantling the existing damaged RCC Roof slab Concrete of CISF Cabin and where ever required without damaging the near by structure to the required level and shape all as directed and as per site condition of work and depositing the dedris with in a lead of 50m for disposal, including all labour, tools, tackles,equipments, transport, fuel, etc,complete.

3.Providing / drilling holes of 20mm dia and 300 mm deep hole at 300c/c for fixing 16mm dia high yeild strength deformed (HYSD Fe 415/Fe500 grade) TMT bars as anchor rod (Shear key) including drilling the existing break water as specified or as directed at site including supplying and mixing anchor resin HILTI RE 500 or equivalent for fixing anchor rod using suitable method all as per relevent specifications and all as directed, including all materials , labour, tools, equipments, transport,fuel,etc., complete. ( Note: Payment will be made for Anchor rods separatly)

4. Dismantling the existing brickwork in Cement Mortar to the required height of parapet wall and wherever required without damaging the nearby structures including collecting and bringing down the debris to the ground level and depositing the debris within a lead of 50m for disposal all as directed and as per site condition of work including all labour, tools, tackles,equipments,transport,fuel,etc, complete.

5.Dismantling and removing of the existing weathering course pressed tiles in Cement Mortar from the roof slab to the required depth and wherever required without damaging the nearby structures includingcollecting and bringing down the debris to the ground level and depositing the debris within a lead of 50m for disposal all as directed and as per site condition of work including all labour, tools, tackles,equipments,transport,fuel,etc, complete.

6.Dismantling the existing lime concrete over the roof to the required depth wherever required for wall portion without damaging the nearby structures including collecting and bringing down the debris to the ground level and depositing the debris within a lead of 50m for disposal all as directed and as per site condition of work including all labour, tools, tackles, equipments, transport,fuel,etc, complete.

7.Chipping and removing the existing damaged cement wall plastering / floor plastering in Cement mortar to the required thick wherever necessary without damaging the nearby structures, including collecting and bringing down the debris to the ground level and depositing the debris within a lead of 50m for disposal all as directed and as per site condition of work including all labour, tools, tackles, equipments,sacffolding, transport,fuel,etc, complete.

8..Providing half Brick work using approved quality bricks of class designation 50 in cement mortar 1:4 ( 1 Cement : 4 crushed stone sand) for Balcony Parapet wall at first floor level and wherever necessary,all as as per relevant specication and as directed at site, including all materials, cement, labour,curing, tools, equipments, transport,fuel,etc., complete.

9.. Providing half Brick work using approved quality bricks of class designation 50 in cement mortar 1:4 ( 1 Cement : 4 crushed stone sand) for Terrace Parapet wall at second floor level and wherever necessary,all as as per relevant specication and all as directed at site, including all materials, cement, labour,curing, tools, equipments, transport,fuel,etc., complete.

10. Providing and laying of 60mm thick RCC drop slab for CISF room in cement concrete 1:2:4 mix (1 cement: 2 crushed stone sand: 4 hard granite aggregate 12 mm nominal size) comprising of central core 40 mm thick including providing steel reinforcement of 8 mm tied with 1.25 mm dia black annealed steel binding wire whereever required including providing chicken mesh tied properly over the steel reinforcement and plastering CM 1:3 ( 1 cement : 3 crushed stone sand) 6 to 10 mm thick on either side of drop slab including centering ,shuttering,mixing tranporting placing ,vibrating,all as per relevant specication and all as directed at site of work, including all materials, cement, labour,curing, tools, equipments, scaffolding, transport,fuel,etc., complete. Note: Payment will be made for steel reinforcement separately under relevent item.

11.Providing Brick work using approved quality bricks of class designation 50 in cement mortar 1:5 ( 1 Cement : 5 crushed stone sand) for brick work and wherever necessary,all as as per relevant specication and as directed at site, including all materials, cement, labour,curing, tools, scaffolding , lifting, equipments, transport,fuel,etc., complete. 11(a).Up to first floor level (Ground floor)

11(b).Up to second floor level (First floor)

12.Supplying, fabricating and placing in position HYSD (Fe 415/500 grade) TMT steel bars as reinforcement for all RCC works wherever required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per relevant specification, drawings and as directed, including all materials, labour, tools, equipment, transport, fuel, etc., complete. Note:1.The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., complete. Binding wire will not be measured for payment purpose. 2.The contractor will be allowed to use Fe500 Grade TMT steel bar without claiming any extra cost.

13.Providing and laying plain cement concrete of mix 1:4:8 in volumetric proportion (1 cement : 4 crushed stone sand : 8 stone aggregate (hard granite) 40mm nominal size ) for flooring , etc. including mixing, transporting, placing, ramming, consolidating, etc. including cement , all labour, materials, equipment, tools, etc. complete.

14.Providing Brick on edge for cupboard using approved quality bricks of class designation 50 in cement mortar 1:3 ( 1 Cement : 3 crushed stone sand) for brick work and wherever necessary,all as as per relevant specication and as directed at site, including all materials, cement, labour,curing, sacffolding, tools, equipments, transport, fuel, etc., complete.

15 (a). Providing and laying RCC of mix 1:1.5:3. in volumetric proportion 1Cement, 1.5 crushed stone sand, and 3 stone aggregate hard granite graded metal 20mm nominal size) for plinth beam of CISF Bunk and wherever required including, mixing, transporting, placing, ramming,consolidating all as per relevant specication and as directed at site, including all materials, cement, labour,curing, shuttering tools, equipments, transport,fuel,etc., complete. Note:Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item.

15(b).Providing and laying RCC of mix 1:1.5:3. in volumetric propotion 1Cement, 1.5 crushed stone sand, and 3 stone aggregate hard granite graded metal 20mm nominal size) for lintel of CISF Bunk and wherever required including, mixing, transporting, placing, ramming,consolidating all as per relevant specication and as directed at site, including all materials, cement, labour,curing, centering,shuttering tools, equipments, transport,fuel,etc., complete. Note:Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item.

15(c ).Providing Reinforced cement concrete of mix 1:1.5:3, in volumetric proportions (1 cement: 1.5 crushed stones and : 3 hard granite graded stone aggregate of 20 mm nominal size) for R.C.C sunshadesof CISF bunk including finishing the exposed surface with in C.M 1:3 (1 Cement : 3 crushed stone sand ) 6 to 10mm thick. all as per relevant specifications, all as directed at site of work including scaffolding, shuttering, mixing, transporting, placing, vibrating, curing, including all labour, materials, Cement, equipments, tools, plants, fuel, etc., complete. Note: Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item.

15(d).Providing and laying RCC of mix 1:1.5:3. in volumetric propotion 1cement, 1.5 crushed stone sand, and 3 stone aggregate hard granite graded metal 20mm nominal size) for Roofslab of CISF Bunk and wherever required including, mixing, transporting, placing, ramming,consolidating all as per relevant specication and as directed at site, including all materials, cement, labour,curing, centering,shuttering tools, equipments, transport,fuel,etc., complete. Note:Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item.

15(e).Providing and laying RCC of mix 1:1.5:3. in volumetric propotion 1cement, 1.5 crushed stone sand, and 3 stone aggregate hard granite graded metal 20mm nominal size) for Roof Beam of CISF Bunk and wherever required including, mixing, transporting, placing, ramming,consolidating all as per relevant specication and as directed at site, including all materials, cement, labour,curing, centering,shuttering tools, equipments, transport,fuel,etc., complete. Note:Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item.

16. Providing and laying RCC of mix for 1:2:4. in volumetric propotion 1 cement, 2 crushed stone sand, and 4 stone aggregate hard granite graded metal 20mm nominal size) for cup board slab 40mm thick for CISF bunk and wherever required including, mixing, transporting, placing, ramming,consolidating all as per relevant specication and as directed at site, including all materials, cement, labour,curing, centering,shuttering tools, equipments, transport,fuel,etc., complete. Note:Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item.

17.Preparing the surfaces of internal wall surfaces Of CISF bunk, pump room & wherever required and plastering with cement mortar 1:4 ( 1 cement :4 crushed stone Sand ) 12 mm thick to the required finish,curing etc., all as per relavant specification and as directed including all materials ,labours, equipments, scaffolding, etc., complete

18. Preparing the surfaces of celling area of CISF bunk, pump room & wherever required and providing ceiling plastering in cement mortar 1:3 ( 1 cement :3 crushed stone Sand ) 6 to 10 mm thick to the required finish, curing etc., all as per relavant specification and as directed including all materials, cement,labours, equipments,tools, scaffolding, etc., complete.

19.Preparing the external wall surfaces of CISF bunk, pump rooms & wherever required and plastering with cement mortar 1:5 ( 1 cement : 5 crushed stone Sand ) 12 mm thick to the required finish,curing etc., all as per relavant specification and as directed including all materials ,labours, scaffolding, equipments etc., complete

20.Preparing the surfaces of new ceiling and applying two coats of white washing using Lovelycem or equivalent to give an even shade all as directed at site of work including all labour, scaffolding, materials, tools, equipments, brushes, etc.,complete.

21. Preparing the Interior and exterior New wall surfaces and applying two coats of (ACE) Acrylic copolymer emulsion paint (Asian Berger or Nerolac brand) over a coat of primer of superior approved quality,colour to give an even shade all as directed at site including all materials, labour, scaffoldings, brushes, tools, equipments etc., complete.

22. Providing and fixing colour anodized aluminium hollow sections as main frame for doors with extruded built up standard sections of approved make INDAL / JINDAL or equivalent colour anodized of approved colour , shade and finish, match with existing and according to IS 1868 (minimum anodized coating of Grade AC 15) including supplying and fixing necessary accessories like anodised aluminium snap on beading (clips), anodised aluminium cleat angles, fully threaded 75mm long metal screws, wooden plugs and metal screws etc., including drilling holes in the concrete / brick masonry etc., wherever required all as directed including all materials, labour, tools, equipments, scaffolding, transport, fuel, etc., complete. Note: (i) Aluminium sections shall be smooth, rust-free, straight, mitered and jointed mechanically wherever required. (ii) Incase the specified aluminium section is not available in the market, the nearest section may be used after the approval of the Nodal officer. iii). The rate shall be inclusive of items like necessary anodized aluminium cleat angles,C.P.brass / stainless steel screws, wooden plugs used for fixing frames etc.Complete

23. Providing and fixing colour anodized aluminium sections Shutter frames for doors of sliding/swing with extruded built up standard sections of approved make (INDAL /JINDAL or equivalent) colour anodized of approved colour , shade and finish, match with existing approved colour anodized as per IS 1868 (minimum anodized coating of Grade AC 15),including supplying and fixing with necessary accessories like snap on beading (clips), cleat angles, fully threaded 75mm long metal screws, wooden plugs & metal screws, anodised aluminium push plates 100mm wide both sides fixed with G.I. Bolts and nuts, metal screws, including fixing of door rods at top & bottom section and providing woollen felts, concealed locking arrangements, woollen felt, fixing of fittings, all as directed including all materials, labour, tools, equipments, scaffolding, etc., complete. Note: (i) Aluminium sections shall be smooth, rust-free, straight, mitered and jointed mechanically wherever required. (ii) Incase the specified aluminium section is not available in the market, the nearest section may be used after the approval of the Nodal officer. (iii) The rate shall be inclusive of all accessories.

24. Providing and fixing Colour anodized aluminium sections for sliding Window main frames with extruded built up standard tubular or other sections of approved make (INDAL/JINDAL or equivalent) as available in the market, of any approved colour and shade and finish,match with existing, according to IS 1868 (minimum anodized coating of Grade AC 15) with necessary accessories like cleat angles, fully threaded 75mm long metal screws, wooden plugs & metal screws etc., including drilling holes in the concrete / brick masonry etc., wherever required, all as directed including all materials, labour, tools, equipments, scaffolding, transport, fuel, etc., complete. Note: (i) Aluminium sections shall be smooth, rust-free, straight, mitered and jointed mechanically wherever required. (ii) Incase the specified aluminium section is not available in the market, the nearest section may be used after the approval of the Nodal officer. iii). The rate shall be inclusive of items like necessary anodized aluminium cleat angles, C.P.brass / stainless steel screws, wooden plugs used for fixing frames etc.Complete

25. Providing and Fixing colour anodized aluminium sections shutter frame for sliding window with extruded built up standard sections of approved make ( INDAL / JINDAL or equivalent make) anodized of any approved colour, according to IS 1868 (minimum anodized coating of Grade AC 15) including supplying and fixing with necessary accessories like metal screws, handles, locking and sliding arrangements, PVC wheels, etc., all as directed at site of work including all materials, labour, tools, equipments, scaffolding, transport, fuel, etc., complete. Note: (i) Aluminium sections shall be smooth, rust-free, straight, mitered and jointed mechanically wherever required. (ii) Incase the specified aluminium section is not available in the market, the nearest section may be used after the approval of the Nodal officer. (iii) The rate shall be inclusive of all accessories.

26. Providing and fixing in position 12mm thick wood based three layered flat pressed melamine faced particle board (Interior Grade) for door bottom panels with pre-lamination of desired colour / shade on both sides (Nova pan or equivalent)of approved quality for doors and partitions with accessories like rubber beadings, etc, including painting the cut portions with wood guard paint all as directed including all materials, labour, tools, equipments, transport, fuel, etc, complete. Note: 1 The particle board shall conform to IS 3087 Type I and the lamination shall conform to IS 12823 grade 1 Type II. 2. Actual area of Particle board fixed alone will be measured for payment purpose. 3. The cut portions of particle board shall be painted with chlorinated rubber or / wood guard of approved quality. The rate quoted shall be inclusive of the above cost and no extra payment will be made. 4. The rate shall including the cost of rubber beading etc.,

27. Supplying and fixing in position 5mm nominal thick plain glass (saint gobain (or) Modiguard make or equivalent) for window shutters and fixing with necessary accessories like rubber beading, screw etc., all as per relevant specifications and as directed at site, including all materials, labour, tools, scaffolding, equipment, transport, fuel etc., complete.Note: - 1. The actual area of glass used will be measured for payment purpose. 2.The rate shall including the cost of rubber beading etc.,

28. Supplying and fixing anodised aluminium fittings confirming to Bureau of Indian Standard specification (Minimum anodise coating of AC 10 grade) in doors/windows etc., with necessary screws, etc., as directed including all materials, labour, tools, equipments, etc. complete. 28 (a). Aluminium Butt hinges 150mm Long

28 (b). Aluminium tower bolt 250 mm Long

28 (c).Aluminium Handle 100 mm long

29.Supplying , fabricating and erection of new MS ladder for CISF watch room at Gate No. 2.Structural steel members for Main Waist frame ISMC 150 x 75 mm , for steps ISMC 100 x 50 mm and hand rails for box section 40x 40 mm, and ballusters or nerest availablesize/thickness with the pre approval of the Trust Engineers with necessary Gusset Plates, base plates, stiffner,bolts and nuts including all accessories / consumables all as per relevant specifications including one coat of red oxide primer and all as directed at site of work, including all materials ,labour,tools, transport,fuel and providing scaffolding, all eqiupment such as welding plants,gas cutting, etc., complete. Note:1). All the ends to be closed with suitable plates. 2).Necessary arrangements will be made by the contractor for weighment 3). Payment will be made based on actual weight of steel members used in the work.

30. Providing and laying PCC of mix for 1:2:4. in volumetric proportion 1 cement:, 2 crushed stone sand, : 4 stone aggregate hard granite graded metal 12mm size) for Granolithic flooring 40mm tk with floating coat of cement including, mixing, transporting, placing, ramming, consolidating all as per relevant speciation and all as directed at site of work , including all materials, cement, labour, curing, centering, shuttering tools, equipments, transport, fuel,etc., complete

31.Preparing the surfaces of flooring, top of roof slab etc., and plastering in cement mortar 1:3 (1cement : crushed stone sand) 20mm thick to the required finish curing etc., wherever required all as per relavent specification and as directed at site of work including all labour, materials, tools, equipments, etc., complete.

32. Providing and fixing of rigid unplasticized PVC pipes 110mm outter dia (Finolex or Trubore or Varun or Supreme) 4kgf/sq.cm. for Rain water down take lines including necessary bends, tees, elbows, shoes, specials etc., joining the pipes using necessary adhesives, on wall with necessary PVC clamps and making connections to floor traps, gully traps manholes etc., and making good the disturbed portions all as per relevant specification and all as directed at site including all materials, labour, tools, equipment, scaffolding etc., complete

33. Preparing the surfaces of new Steel members of MS ladder and applying with two coats of synthetic enamel paint (Asian / Berger / Dulux or equivalent) of approved colour to give an even shade and finish all as directed at site of work including all labour, materials, tools, tackles, equipments, brushes, scaffolding etc., complete. NOTE:1. Necessary painting co-efficient shall be allowed as per Ch.P.A. engineering manual. 2.The above quantity is inclusive of painting co-efficient

34.Loading, transporting and levelling the debris etc., in the low lying areas nearer to the site of work within a lead of 2Km all as per relevent specifications and all as directed at site of work including all labour, materials, tools, tackles, equipments,transport, fuel, etc., complete. Debris Note: 1. The tenderer shall maintain trip sheets in triplicate in Port’s approved format at his own cost for the quantity of debris transported. 2. Payment will be based on the lorry cubical content. No deduction for voids will be made.