CA NO GE/ND78/202122 REPAIR / MAINT INTERNAL E/M FITTINGS/FIXTURES AND INTERNAL WIRING AS WELL AS SUBMAIN WIRING,LT PANEL AT CERTAIN BUILDINGS OF DAD COMPLEX PANCHWATI UNDER GE NEW DELHI

Amount

Attending complaints for checking and replacing the existing defective electrical items for continuous electric supply including carrying out minor repair as required to make the item functional and replacing fuse, small pieces of copper wire, copper cable as of suitable size at site, insulation tape roll etc., Attending minor repair(s) such as testing, connections, fittings, nut, bolts screws etc to ceiling fan, exhaust fan (without taking down) etc, emergent complaints i.e. no light, earth leakage, short circuit, neutral break in mains/sub mains/ internal circuits of existing electrical system of main building/block and making continuous electric supply including carrying out minor repairs etc. required to make the system in order/functional with insulation tape roll, copper thimbles, glands, earthing wire as required at site complete all as specified and directed by Engineer-in-Charge. Notes :- This item is applicable only where no store is required. 1. The site for attending complaints is DAD Panchwati Complex. Contractor shall provide minimum one tradesmen (electrician) for each site to attend the complaint in all working days between 0830Hrs to 1700Hrs including holiday and sunday. 2. Contractor shall ensure the security passes for his staff, to be obtained from concern authority for attending complaints. 3. The contractor will ensure that the team of electricians with necessary tools bag shall always remain present at complaint cell to attend the complaints. 4. A recovery of Rs. 100/- for not attending the complaint upto 24 hours and after 24 hours Rs. 200/- per 24 hours shall be recovered from the contractor due. 5. All the complaint slip, register & other connected document will be provided by the contractor without any extra cost. 6.The above tradesmen shall not be utilize for the complaints where material is required and these complaint shall be measured and paid seperately as S&F here-in-after.

S&F in replacement of switch piano flush type 6 Amp, SP, one way 230 volts AC all as specified. Make:-Philips/Schneider/Anchor

S&F in replacement of switch piano flush type 6 Amp SP two way 230 volts AC all as specified. Make:-Philips/Schneider/Anchor

S&F in replacement of bell push switch piano flush type 6 Amps, SP, 230 Volts AC all as specified. Make:-Philips/Schneider/Anchor

S&F in replacement of switch piano flush type 16 Amp, SP, one way 230 volts AC all as specified. Make:-Philips/Schneider/Anchor

S&F in replacement of piano flush type socket out let 5 pin 6 Amp, 230 volts AC all as specified. Make:-Philips/Schneider/Anchor

S&F in replacement of piano flush type socket out let 6 pin 16 Amp, 230 volts AC all as specified. Make:-Philips/Schneider/Anchor

S&F in replacement of piano type electronic fan regulator suitable for 1200/1400 mm ceiling fan all as specified. Make:-Philips/Schneider/Anchor

S&F in replacement of call bell suitable for 230 volts AC all as specified. Make:-Philips/Schneider/Anchor

S&F in replacement of ceiling rose 3 terminal / PVC / Polycarbonate, insulated body all as specified.

S&F in replacement of decorative lamninated sheer 3 mm thick of size 8"x12" including necessary cutting of sheet for fixing switch/socket complete as specified and directed

S&F in replacement of decorative lamninated sheet 3 mm thick of size 8"x5" including necessary cutting of sheet for fixing switch/socket(As per enclosed diagram) complete as specified and directed

S&F in replacement of decorative lamninated sheet 3 mm thick of size 7"x4" including necessary cutting of sheet for fixing switch/socket (As per enclosed diagram)complete as specified and directed

S&F in replacement of decorative lamninated sheet 3 mm thick of size 4"x4" including necessary cutting of sheet for fixing switch/socket(As per enclosed diagram) complete as specified and directed

S&F in replacement of single core,FRLS cable, PVC insulated, unsheathed, multi stranded copper conductor cable of size 1.5 Sqmm all as specified. Make:RR/POLYCAB/HAVELLS

S&F in replacement of single core,FRLS cable, PVC insulated, unsheathed, multi stranded copper conductor cable of size 2.5 Sqmm all as specified. Make:RR/POLYCAB/HAVELLS

Supply only in replacement for MCB SP 06 to 32 Amps 240 Volts, 10 KA, `C' curve, all as per site requirement and as directed by Engr-in-Charge. Make : Legrand/Havells/indoasian

Supply only in replacement for MCB SPN 40 Amps, 240 Volts, 10 KA, `C' curve, all as per site requirement and as directed by Engr-in-Charge. Make : Legrand/Havells/indoasian

Supply only in replacement MCB TPN/ Isolator 4P from 40-63 Amps 415 volts, 'C' Series 10 KA as per site requirement and as directed of approved make. Make : Legrand/Havells/indoasian

S&F in replacement of MCCB TP 160 Amp, 415 Volts,16kA thermal type complete all as specified. MAKE:-Legrand/Indoasian/Havells

S&F in replacement of MCCB TP 100 Amp, 415 Volts ,25kA thermal type complete all as specified. MAKE:-Legrand/Indoasian/Havells

S&F in replacement of MCCB TP 125 Amp,415 Volts, 25kA thermal type complete all as specified. MAKE:-Legrand/Indoasian/Havells

S&F in replacement of metal clad plug top 20 Amp, 230 volts AC all as specified. MAKE:-Legrand/Indoasian/Schneider

S&F in replacement of metal clad socket outlet 20 Amps, 230 volts AC all as specified. MAKE:-Legrand/Indoasian/Schneider

S&F in replacement of LED Integrated Batten T5 10 watt - 2FT White, indoor decorative polycarbonate extruded T5 LED batten --integrated type environmental friendly complete all as specified and directed. Make : Cat Part No LHEXACP7IN1W010 of Havells or equivalent Model in Crompton/Philips.

S&F in replacement of LED Batten T-5 fitting 20 watt LED White, indoor decorative aluminium extruded T5 LED batten -integrated type environmental friendly complete all as specified and directed. Make : Cat Part No LHEXARP7IN1W020 of Havells or equivalent Model in Crompton/Philips/Bajaj.

S&F in replacement of aesthetically designed Surface mounting round shaped LED downlighter with Slim surface mounted 6 watt LED panel with premium diffuser to ensure glare free & even light distribution complete all as specified and directed. Make :Model - LHEAAHP7IL1W006 OF Havells or equivalent Model - in Crompton/Philips.

S&F in replacement of LED Building security light fitting 30W energy saving and environmental friendly LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP66 protection as directed. Make: Cat Part No SL45WLED757PASYTOPC of Havells or equivalent model in Crompton/Phillips

S&F in replacement of B-22 holder suitable Led bulb 9 watts all as specified.

S&F in replacement of fan capacitor 2.5 Mfd all as specified. Make EPCO Cat part No 32415G5255J213 or equivalent

S&F in replacement of fan capacitor 3.15 Mfd all as specified. Make: Cat part no B32415G5315J213 of Epco or equivalent

Taking down of old unserviceable ceiling fan/exhaust fan dismantling of blades, transportation to work shop and carrying out rewinding, transportation to site, reinstallation and testing Complete all as specified and directed by Engineer-in-charge. Note : Rewinding will be measured and paid separately under this Schedule.

M&L for Rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enamelled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush where ever required Complete all as specified and directed by Engineer-in-charge. Note : The lathe machine work if necessary to making upper/lower sheet of fan will be measured under this item only.

All as per ser item No 33 but 1400 mm sweep

All as per ser item No 33 but exhaust fan 230/300 mm sweep

All as per ser item No 33 but exhaust fan 400/600 mm sweep

S&F in replacement of ceiling fan Ball bearing of suitable size & model (as per sample). Make:- NBC/ SKF

S&F in replacement of 'U' clamps with rubber reel, bolts, nuts, washers and safety pin ceiling fan of any size/ make

S&F in replacement of Down rod of 1' height fabricated out of MS pipe 12mm dia heavy duty duly painted with one coat of white paint complete.

S&F in replacement of Canopy of Ceiling fans of 1200/1400mm swipe size heavy duty duly painted with one coat of white paint complete.

S&F in replacement of blade of Ceiling fans of 1200/1400mm swipe size heavy duty duly painted with one coat of white paint complete.(As per sample)

S&F in replacement of blade of exhaust/fresh air fans of 230/300/450 mm swipe size heavy duty duly painted with one coat of paint of suitable colour complete.(As per sample)

S&F in replacement of metal frame of exhaust/fresh air fans of 230/300/450 mm swipe size heavy duty duly painted with one coat of paint of suitable colour complete.(As per sample)

S&F in replacement of motor of exhaust/fresh air fans of 230/300/450 mm swipe size heavy duty duly painted with one coat of paint of suitable colour complete.(As per sample)

M&L for spray painting two coat (white colour) with synthetic enamel paint to Ceiling fans/Exhaust fan of any capacity to reach upto satisfied finish of painting after cleaning and preparation of surface complete all as specified and directed by Engineer-in-charge.

M&L for spray painting two coat (white colour) with synthetic enamel paint to Geysers 25/50 Liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface complete all as specified and directed by Engineer-in-charge.

S&F in replacement of heating element of 1.5 KW (triangular/circular) as required at site including rubber washers (ISI marked) etc complete all as specified and directed (As per sample).

S&F in replacement of heating element of 2.0 KW (triangular/circular) as required at site including rubber washers (ISI marked) etc complete all as specified and directed

S&F in replacement of storage tank made out of stainless steel sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank.

S&F in replacement of insulating material (Glass wool) for 25 litre capacity Geysers all as directed by Engineer -in - charge.

S&F in replacement of base plate assembly 20 SWG heavy duty suitable for 25 litre capacity stainless steel tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample).

S&F in replacement of chromium plated connection pipe 600mm long with two brass adopters washers and connecting up complete all as specified and directed.

S&F in replacement of PVC connection pipe 450mm long with two brass adopters washers and connecting up complete ISI mark all as specified and directed by Engr-in Charge

S&F in replacement of safety nut for high pressure release (As per sample).

S&F in replacement of non return valves 15mm dia and connecting up complete (ISI marked).as per sample

S&F in replacement of top cover for geysers of 25 ltrs capacity any make as required at site duly painted with two coats of Synthetic enamel spray paint (first quality) all as directed.

S&F in replacement of bottom cover for geysers of 25 ltr any make required at site duly painted with synthetic enamel spray paint (first quality) with inspection plate in two pieces all as specified and directed.

S&F in replacement of outer cover for geyser made out of MS sheet suitable for 25 ltrs capacity geyser vertical/horizontal type all as specified and directed.

S&F in replacement of thermostat (ISI Marked) for 25 Liters capacity Geyser. Make : Daspass/Theeta/TTE

S&F in replacement of indicator lamp (Red & Green) 230 volts suitable for Geyser (as per sample)

S&F in replacement of mild steel hole fastener 10mm dia, 100mm long including nut and washer.

S&F in replacement of 15 mm gun metal valve..

Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point ) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket and making good the disturbed surface of wall/ floor complete all as specified.

M&L for point wiring with PVC insulated unsheathed multi stranded, single core, FRLS type, copper conductor cable of size 1.5 sqmm 1100 Volts including one run of PVC insulated unsheathed multi stranded, single core, FRLS type, copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC concealed rigid non-metallic conduit medium grade and its accessories including provn of new galvanised sunken box including decorative sheets for housing the piano type switches, sockets & fan regulators for the following:- Note :- In existing conduit wiring (new conduit will be added where there is a burnt/blockage/damage to the existing conduit including bends/elbows/tees/Junction boxes).

(a) One light/fan point controlled by one No, one way switch.

(b ) 6 Amp socket outlet point controlled by one No, one way switch on same board

(c ) 6 Amp socket outlet point controlled by one No, one way switch on independent board

M&L for point wiring with PVC insulated unsheathed multi stranded, single core, FRLS type, copper conductor cable of size 2.5 sqmm 1100 Volts including one run of PVC insulated unsheathed multi stranded, single core, FRLS type, copper conductor cable of size 2.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC concealed rigid non-metallic conduit medium grade and its accessories including provn of new galvanised sunken box including decorative sheets for housing the piano type switches and sockets on independent board. Note :- In existing conduit wiring (new conduit will be added where there is a burnt/blockage/damage to the existing conduit including bends/elbows/tees/Junction boxes). Note for item No 64 to 68:- (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

S&F in replacement of PVC Casing Caping of size 1" complete all as specified & directed.

S&F in replacement of PVC conduit 20mm dia, rigid, complete all as specified & directed.

S&F in replacement of flexible PVC pipe of 20mm dia complete all as specified & directed.

S&F in replacement of LED Glass Bulb 10 Watt B-22 Cap, AC 230V, 50 Hz, suitable for Batten Holder/Bulk head/wall light fittings complete all as specified and directed by Engineer -in-Charge. Make: havells/Philips/Crompton.

S&F in replacement of single core, FRLS cable, PVC insulated, unsheathed, multi stranded copper conductor cable of size 4 Sqmm complete all as specified and as directed. Make:Polycab/Havells/RR.

S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 6 sqmm complete drawn in existing conduit along with 1x 6 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and connected to common earth dolly complete all as specified. Make:-RR/Havells/Polycab

S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 10 sqmm complete drawn in existing conduit along with 1x 10 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and connected to common earth dolly complete all as specified. Make:-RR/Havells/Polycab

S&F in replacement of metal clad enclosure with plug and socket 20 Amp with one MCB SP, 20 Amps 230 volts AC all as specified. Make:-Havells/indoasian/Legrand

S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 4 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing all as specified. Make:-Havells/indoasian/Legrand

S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 8 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing all as specified. Make:-Havells/indoasian/Legrand

S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 12 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing all as specified. Make:-Havells/indoasian/Legrand

S&F in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified. Make:-Havells/indoasian/Legrand

S&F in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified. Make:-Havells/indoasian/Legrand

Supply only in replacement Rugby Bulk head 8 watt in die cast aluminium housing & frosted glass complete all as specified and directed by Engineer-In-Charge Make: Cat LHKL01160099 of Havells or equivalent model in Crompton/Bajaj/Phillips

S&F in replacement of Exhaust fan Louvers 230/300 mm Size, iron including taking out old louvers up to fourth floor complete all as specified. Note:-Staircase arrangement for fixing louvers will be made by contractor.

Preventive maintenance of ceiling fan/exhaust fan/cabin fan/wall mounted fan of any make & any size including checking of fan clamp, nuts, bolts & washer and carry out the oiling/greasing all as specified and directed by Engr-in-charge. (Note: Spare parts shall be measured & paid separately).

Preventive maintenance of 25 Ltrs geysers of any make including checking of its fastener/ nuts, bolts & washer and carry out checking/testing of cut out, thermostat, element, assembly all as specified and directed by Engr-in-charge. (Note: Spare parts shall be measured & paid separately).

Preventive maintenance checking of elect DBs (SPN/TPN/Load line DBs ) switch board such as checking the looses connection in MCBs , cutting the burnt cables and reconnecting to MCBs/DBs spare required shall be maintained and paid under relevant items

A N BUILDERS

M/S SONU ENTERPRISES

M/S R K JATOLIA ENTERPRISES

S.R. Constructions

ramveer Singh

Microsys Controls India