Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹10.7 L+₹1.2 L (13.0%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹11.7 L+₹2.2 L (23.1%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
16 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER ABOHAR
GARRISON ENGINEER ABOHAR PIN 152116
REPAIR / MAINT OF MISC B/R COMPLAINT OF MD ACCN UNDER GE ABOHAR MILITARY STATION.
2024_MES_638202_1
GE ABH-67/23-24
Open Tender
Civil Works
Item Rate
180 days
ABOHAR MIL STN
AS PER NIT
7 documents required · 7 mandatory
₹500
GE ABOHAR
₹24,000
Yes
22 Apr 2024
19 Jan 2024
19 Feb 2024
19 Jan 2024
16 Feb 2024
2 Feb 2024
Amount
Taking down chowkats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified.
Taking down chowkats with shutters(without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm)
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and removing from site
Taking down shutters refixing in same opening but area exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified.
S&F PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and designs
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC’C’ channel heaving a PVC sheet strip of 20mm width suck inside
S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed size of frame 105 x 60mm all as specified and directed.
S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed size of frame 125 x 60mm all as specified and directed.
M&L Cement concrete 1:2:4 type B–1 filling of pressed steel frame and hold fast blocks etc all as specified and directed by Engineer - in - Charge.
S & F Factory made 35mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats complete all as specified and directed by Engineer - in - Charge.
S & F Factory made Plain framed, panelled shutter IInd class hardwood rail and style 35 mm thickness (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer - in - Charge.
S&F anodised aluminium Powder coated frame shutter , pratation and related frame members for doors , window , ventilators with with one or more rebate including joiing cleat forfixing etc . complete all as specified.
S&F anodised aluminium Powder coated grill in window , doors or ventilator including fixing material complete all as specified and as directed by Engineer in charge.
S&F in repairs aluminium (die cast) body, door closer hydraulically regulated designation No. 3 , universal type , suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, including making good existing floor after installation of floor spring.
S&F 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and directed.
S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed.
S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm
S&F Aluminium anodized barrel tower bolt of extended section and fixed 200 mm long
S&F Aluminium handle cast type anodized 125 mm long
S&F Aluminium handles, cast type, anodised 150mm size
S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
M&L Aluminium mortise lock 4 levers and 75mm size for aluminium doors.
M&L in repairs Aluminium mortise lock 4 levers and 75mm size for aluminium doors.
Aluminium Sliding Window push Lock
S&F 150mm floor door stopper of aluminium alloy body and tongue,anodised with hard drawn steel spring,fixed in floor.
S&F in repair 150mm floor door stopper of aluminium alloy body and tongue,anodised with hard drawn steel spring,fixed in floor.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40mm
S&F in repair Stainless stee wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40mm
Hacking out old broken glass (any size,thickness,quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified & directed by Engineer -in-charge.
S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares in each pane
S & F 3 mm thick Figured glass ordinary quality and glazing with oil putty in square in each pane all as specified .
S&F sheet glass 4.8mm thick ordinary quality and fixed in aluminium section including necessary rubber beading and solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturers in squares in each pane
S & F door bottom seal rubber strip suitable for aluminium & wooden door shutters including necessary arrangment and directed by engineer in charge
S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete.
M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer .
Demolition of cement concrete ( un re-inforced) of any description in ground floor and pavings Nexc15 cm thickness (below or above GL)
M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below and as directed by Engineer-in-Charge. :- (a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:5:10 over the coating as per requirment (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete as specified Manufacturer. Make:- Dr. Fixit/Fosroc/STP Note: (i) The treatment shall be carried out as per the manufacturers instructions and as directed by the Engineer in charge. (ii) Plaster shall be measured and paid separately. (iii) PCC filling under sunken area will be measured & paid separately
M & L PCC (1:5:10) using 40mm graded burnt bricks aggregate as in foundation filling & mass concrete or as in sunken floor complete all as specified & directed by Engineer-in-charge
Rendering to sunken slab floor and vertical sides 15mm thick in CM 1:3 using WP compound
S&F in repair PVC low level flushing system 10 Ltr capacity with flush pipe complete as approved by Eng-in charge.
S&F in repair Viterous China squating pan Orrisa pattern size 580/440mm wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with plastic seat cover.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, sheet cover complete.
S&F in repair plastic water closet seat, white closed patern withflat bottom and cover and mild steelcromium plated or aluminium hinging device
S&F repairs vitreous china Half stall urinals flat back white minimum with grating and union for discharge pipe , providing & fixing plugs, bedding urinal against wall in CM 1:2 , securing urinal to plugs with & incl 60mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with nbrackets, flush pipe, grating and union for discharge pipe complete all as specified.
S & F repairs 15 mm bore concealed stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated with long shank and cup (Concealled type)
S & F repairs 20 mm bore Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed
S&F in repairs 15mm bore stop valve/Angle cock fancy type chromium plated with long shank and cup cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.
S & F in repairs 15 mm bore bib tap fancy type chromium plated cast copper alloy with crutch or butterfly handle screwed down ,screwed for iron pipe all as specified.
S/F in repairs pillar taps 15mm bore fancy type chromium plated cast copper alloy with capstan heads scre-wed down high pressure with or without lettered hot' or'cold' with long screwed shanks and fly nuts screwed for iron pipe . ISI marked
S&F in repairs for 15mm dia Bib tap fancy type standard of PTMT any colour high pressure screwed for iron pipe and fixed complete as in repair (Minimum weight 15mm-105 gms) all as specified and directed.
S&Fin repairs for 15mm dia angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete as in repair (Minimum weight 15mm-105 gms) all as specified and directed.
S&F in repair swiwel shower of PTMT (min wt 40 gms) any colour for fixing with 15 mm pipe incld shower arm 15 mm size , 195 mm long with bend of 45 degree Flange of PTMT .
S&F in repair brass chromium plated shower Rose 125 mm size with swivel joints,any size, incl shower arm fixing to pipe or union complete all as specified and directed by Engr-in-charge.
S&F in repair brass chromium plated central hole basin mixer with regular spout,popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed by Engr-in-charge.Make ESS ESS cat part No.- C-211A
S&Fin repairs Sink mixer with swinging spout(wall mounted model)Chromium plated brass with connection and nut complete all as specified and directed by Engr-in-charge. Make- ESSESS Cat part No DE-12 or equivalent to Parryware/nirali/prayag
S&F in repairs brass chromium plated wall mixer for mixing hot & cold water with provision for overhead shower with 140mm long bend pipe and wall flange screwed down for iron pipe and fixed as directed by Engr-in- charge.Make:- ESS ESS cat part No.- C-216D
S & F in repairs Grating doom 125 mm dia with waste hole of PTMT ( Min wt 40 gm )
S&F in repair PVC connection both side brass unions internal for size 15mm dia and 450mm long all as specified and directed by Engineer-in-Charge.
S&F PVC waste pipe 32mm dia & 90 cm long
S&F Chromium plated health faucet 1 mtr long fixed with screws complete all as specified and directed.
S&F EWC Jet spray complete all as specified and directed.
S & F in repair 15mm bore gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe or wt 0.68 kg specified in SSR part Iand fixed all as specified .
S & F in repair 20mm bore gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe or wt 0.68 kg specified in SSR part Iand fixed all as specified .
Dismantling water tanks and removing to store of exc 500 nexc 1000 ltr capacity
S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed by Engineer - in - Charge .
S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed by Engineer - in - Charge .
Disconnecting existing tanks of (exc 500 &1000 litres in capacity), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)
S&F in repair 20mm Ball brass valves, high pressure, with polytheene float and flynut complete, screwed for iron pipe orr brass ferrule and fixed.
Cleaning and removing all scale and dirt etc from tanks and from mouths of circulated pipes etc for exc 500 &n exc 1000 ltr capacity Tank..
Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store
Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store
Taking up or down steel tubing of 25 to 32 mm bore and connections, including cleaning for re-fixing or removal to store
Supply & fixing mild steel tubes of size 15mm bore (medium grade) galvanised with all fittings and fixed complete to wall all as specified & directed by Engineer-in-charge.
Fixing only mild steel tubes of size 15mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified & directed by Engineer-in-charge.
Cutting holes Nexc 150 n. exc into or through but in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required
Supplying and Fixing of 20mm, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls fixed complete to wall all as specified & directed by Engineer-in-charge.
Fixing only mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified & directed by Engineer-in-charge.
Supply & fixing mild steel tubes of size 25 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified & directed by Engineer-in-charge.
Fixing mild steel tubes of size 25 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified & directed by Engineer-in-charge.
Dismantling of cast iron pipes jointed in cement mortar and taking out from trenches walls etc upto 100 mm bore all as specified and directed by Engineer - in - Charge .
S & F PVC(SWR) 110 mm bore Pipes single socketed in any length with rubber ring joints,laid in trenches or in floors all as specified and directed by Engineer - in - Charge.
S & F PVC(SWR) 75 mm bore Pipes single socketed in any length with rubber ring joints,laid in trenches or in floors all as specified and directed by Engineer - in - Charge.
S&F PVC (SWR)branch pieces single /double (equal or unequal) ordinary or inverted with parallel branches 110mm bore
Ditto all as above but 75 mm bore.
S&F PVC(SWR) bend ( any radius) dimenshing pieces or tappers ( large bore measured) 110mm bore
-ditto- all as above but 75 mm bore
S & F in repairs for Cast iron nahani trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)
S & F in repairs for Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)
S & F PVC(SWR) Vent cowls 110mm bore all as specified and directed by Engineer - in - Charge.
Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and rubbish off the permices.
M & L for Double charged Coloured Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick cement and sand screed (1:6) complete all as specified and directed by Engineer - in - Charge.
Ditto all as above but as in skirting over 10 mm cement mortar backing ( 1:3).
S&F glazed ceramic coloured tiles joint free 350x250x7mm/450x350x7mm square or rectanguler as on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4
M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.
Ditto all as above but as in skirting over 10 mm cement mortar backing coat ( 1:3) complete all as specifed and directed.
M&L cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate as in floors 25 mm thick for tiles all as specified.& directed by Engineer -in-charge..
Cutting ,grinding ,cleaning and treating the surface of existing kota stone flooring with beeswax polishing complete as directed by Engr-in-Charge.
M & L Machine cut kota stone slab flooring 20 - 25 mm thick over cement screed base laid over and including 20mm thick screed bed in cement mortar 1:4 set and jointed with grey cement slurry mixed with pigment to match of the slab including rubbing and polishing ,Chamfering and nosing complete all as directed.
M & L Machine cut kota stone slab 18 mm thick in riser of steps,skirting,dado and pillar over cement screed base laid over and including 20mm thick screed bed in cement mortar 1:4 set and jointed with grey cement slurry mixed with pigment to match of the slab including rubbing and polishing,Chamfering and nosing complete all as directed.
Taking down cement or cement lime plaster from brick walls and ceiling etc including raking out joints, hacking for key scrubbing down with water etc.
M & L for rendering 15mm thick on fair faces of brick work in cement mortar 1:6 finished even & smooth without using extra cement.
M & L for rendering 15mm thick on fair faces of brick work in cement mortar 1:4 finished even & smooth without using extra cement.
M&L rendering 10 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement.
M & L Washed stone grit plaster on exterior walls in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per sqm, top layer 15 mm cement plaster 1:1/2:2 (1 cement :1/2 coarse sand 2 : stone chipping 10 mm normal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to be expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately).
Forming groove of uniform size 12 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using aluminium channel size 12X15X0.50 MM thick, nailed to the under layer and finishing the groove complete as per specification and direction of the Engineer-in-Charge.
M&L for two coat of cement base paint over a coat of alkali resistant cement primer on newly plastered surface including preparation of undecorated surface complete all as specified and as directed
M& L for two coat of oil bound distemper on new plasterd wall surfaces of walls paint over 3mm thick wall care putty including necessary preparation of surfaces all as specified.
M&L for preparation of old plastered surfaces of wall by complete removing old treatment and applying two coats of interior grade wall putty( 1mm thick of each coat) and making it smooth with sand paper by mechanical method i.e. with hand electric grinder and then applying two coat of Acrylic distemper including all as specified and directed by Engr-in-charge.
M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling.
M & L one coat of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces all as specified and directed by Engineer - in - Charge .
M & L applying one coat of cement base paint on old decorated plastered surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of painted surfaces complete all as specified and directed by Engineer - in – Charge
CHILLANA CONSTRUCTION COMPANY
RANDHIR AND COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .