REPAIR TO KITCHEN TOILETS BATH INCLUDING KITCHEN CABINET AND TOILET BATH PVC DOOR AND RELATED B R WORKS IN CIVILAN QTRS AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Cutting chases,pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves,lintels etc; and cutting chases for concealed water tubing and making good, cutting not exc.10cm girth,complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing pipe with connections for cleaning for refixing or removing or storeyard complete of bore 15mm,complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm,complete all as specified and directed by Engineer-in-Charge.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, complete all as specified and directed by Engineer-in-Charge.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore 20mm, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231) with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor including taking down existing, complete all as specified and as directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including P or S trap (excluding flushing cistern and flush pipe),complete all as specified and as directed.

S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device,complete all as specified and as directed.

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromiumnplated or aluminised hinging device,complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, coupling, strainer, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipeoverall size (915mm x 460mm) bowl size (410mm x 330mm x160mm),complete all as specified and as directed.

S&F in repairs Vitreous China Wash hand basin, white, oval shape, size 580 mm x 450 mm size, excluding taps, chain & plug & porcelain stopper but incl brackets, 40/32 mm dia PVC waste pipe, PVC connection, chromium plate coupling 32 mm dia, approved pedestal & cutting for and pinning ends of brackets or erecting stand,Complete all as specified and as directed.

S&F in repairs Vitreous China Wash hand basin white flat back with pedestal , size (580 mm x 450 mm) size, excluding taps, chain & plug & porcelain stopper but incl brackets, 40/32 mm dia chromium plate coupling 32 mm dia, approved pedestal & cutting for and pinning ends of brackets or erecting stand,complete all as specified and as directed.

S&F in repair Fancy type pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe,complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of (465 x 355 x 265) mm white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, magnum urinal spreader, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe,complete all as specified and as directed.

S&F in repair fancy type 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe,complete all as specified and as directed.

S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union alongwith arm 225mm and flange,complete all as specified and as directed.

S&F in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair fancy type 15mm bore dia of conceled stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions,complete all as specified and as directed.

S&F in repairs tubular towel rail brass chromium plated , 20mm dia, 60cm long between flanges,complete all as specified and as directed. (Make- Prayag or equivalent.)

S&F in repairs PVC (SWR) floor trap 75 mm, plain with CP grating including joining and solvent cement,complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm,complete all as specified and as directed.

S&F in repair Gun-metal ,globe or gate valves with iron handle quarter tun , screwed both ends for iron pipe or for unions of 15mm dia bore and fixed, complete all as specified and directed by Engineer-in-Charge.

Ditto as per srl item No-23 above but 20mm dia bore.

S&F in repairs CP soap dish,complete all as specified and as directed.

S&F Sheet glass shelf/corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. .

S&F in repair Toilet paper holder with flat recessed type stainless steel,Complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position,complete all as specified and as directed. .

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., removal to Store (measured overall as fixed along the centre line over fittings and accessories),complete all as specified and as directed. .

S&F PVC (SWR) pipes single socketed 110mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors,complete all as specified and as directed. .

S&F PVC (SWR) pipes single socketed 75mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors,complete all as specified and as directed.

S&F PVC (SWR) 110mm dia bend any radius,complete all as specified and as directed. .

S&F PVC (SWR) 75mm dia bend any radius,complete all as specified and as directed. .

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area,complete all as specified and as directed by Engr-in-Charge.

Material & Labour for 15mm thick rendering in Cement Mortar(1:6) on brick work or concrete surfaces, finished even and smooth without using any extra cement, complete all as specified and as directed.

M&L for Rendering 10mm thick in CM 1:3 on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement,complete all as specified and as directed.

M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer over 1mm wall care putty, complete all as specified and as directed.

M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of over one coat of alkali resistant primer over plastered surface to prepare the surface even and smooth, complete all as specified and directed by Engineer-in-Charge.

M&L for applying three coats of white wash on ceiling incl preparation of newly plastered surface, complete all as specified and directed by Engineer-in-Charge.

M&L for Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with , filling cracks with birla white putty and brooming to remove all dirt etc and applying two coats of distemper over one coat of alkali resistant primer over 3mm wall care putty,complete all as specified and as directed.

M&L for Preparation of old plastered or unplastered surfaces of ceiling including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes , filling cracks with birla white putty and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of ceiling,complete all as specified and as directed.

M&L for Preparation of old wood and wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc,complete all as specified and as directed.

M&L for Preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc,complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples,complete all as specified and as directed.

S&F in repair tubular brass chromium plated decorative 20mm curtain rod fixing with brackets,complete all as specified and as directed.

S&F in repair 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balanceing white lamination fixed for door, complete all as specified and as directed.

Taking down shutter of any description exc 1sqn but n. exc 2sqm each and refixing in same position including resecuring or easing and adjusting, complete all as specified and as directed.

S&F in repair MS medium weight 100mm butt hinges,complete all as specified and as directed.

Taking down chowkats or frames with shutters n.exc 1.50Sqm (without taking off shutters from the frames),complete all as specified and as directed.

S & F solid PVC door frame of size 50 x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening, complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004,complete all as specified and as directed.

S&F MS butt hinges of 100mm size, medium weight cold rolled mild steel,complete all as specified and as directed. .

S&F aluminum,anodised,barrel tower bolts of 150 mm length, extruded section, complete all as specified and as directed.

S&F aluminum handles of size 100mm, cast type anodised,complete all as specified and as directed.

Dismantling PVC/cement water tank n. exc. 500 ltrs capacity,complete all as specified and as directed.

Dismantling PVC/cement water tank exc 500 ltrs but n exc 1000 ltr capacity complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank triple layered ( cylindrical vertical with closed top) hoisted and fixed in position of1000 liters capacity confiring to IS specification,complete all as specified and as directed. .

S&F rotational moulded polyethylene water storage tank triple layered ( cylindrical vertical with closed top) hoisted and fixed in position of 500 liters capacity confiring to IS specification,complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving's n. exc 15cm thickness(below or above ground level) and removing unserviceable material outside cantt area,complete all as specified and as directed by Engr-in-Charge.

M&L for 50mm thick cement concrete (1:3:6) type C-1 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement concrete,complete all as specified and as diredted.

M&L PCC (1:3:6) of 75 mm thick type C-2 (using 40 mm graded stone agg) as in plinth protection, finished even and fair,complete all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,complete all as specified and as directed by Engr-in-Charge

M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc. 0.06 sqm but n.exc. 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4),complete all as specified and as directed.

M&L for Glazed ceramic coloured designer seamless tiles (350x250x7)mm/(450X350X7) mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM(1:4), complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 15mm thick in CM (1:4),complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surfaces etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 10mm thick screed in CM 1:4 and taking out existing tiles,complete all as specified and directed by Engineer-in-Charge.

M&L for Granite (of any type) work (table rubbed and polishedin steps, jambs, pillars, window-cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite,complete all as specified and as directed.

M/S AMARNATH AGARWALLA (BID ID -3324689)

M/S ASHA ENTERPRISE (BID ID -3325392)

M/S New Builders Corporation (BID ID -3325234)