Construction of Proposed Working Womens Hostel building with 144 beds in St. Thomas Mount, Chengalpet District

Amount

Earth work excavation in all soils (including refilling) a. 0 to 2 m

2 to 3m depth.

Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 m

2 to 3m depth.

Supplying and filling in foundations and the area wherever specified with Filling crushed stone sand

Good Earth brought from outside

Carting away the surplus earth excavated from the basement foundations / footings in the campus, is to be carted away to the desired lead of 20 kms from the site

ANTI-TERMITE TREATMENT Providing Pre - construction Anti - termite treatment and creating a chemical barrier to the building by injecting chemical emulsion

CONCRETE WORKS Providing and laying Plain Cement Concrete 1:4:8

Supplying and laying of plain cement concrete using 1:3:6

REINFORCED CEMENT CONCRETE Providing and laying in position, Standardised Concrete Mix M-30 Grade a)Foundation / Basement

b) Ground Floor

c) First Floor

d) Second Floor

e) Third Floor

f) In Fourth floor

g) In Fifth floor

h) Terrace Floor

Supplying and fixing of Precast slab RCC 1:2:4

Providing Plinth protection with PCC 1:3:6

Supplying, fabricating and fixing in position of steel Fe 550D grade Reinforcement for all RCC work

FORM WORK Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height Reinforced cement concrete Column footing, plinth / grade beam, bed blocks, template surfaces, steps, piers, pile cap, raft slab / beams, RC Binders and such other members

Plain surfaces such as RCC floor slab, roof slab, flat slab, drop panel, beams, lintels, bed blocks, landing slab, waist slab, portico slab / beams and such other members

For plain surfaces such as rectangular, square columns and chamfered sunshades, top and bottom slab of boxing, kitchen platform, loft and such other structural members

Vertical surfaces - For all type of walls (any thickness) including, retaining wall, core walls, shear wall, parapet wall, fins, facia, kerb and median etc... for all floors & levels.

Curved surfaces such as RC walls, sides and bottom of any curved beam, sides of curved slab, lintel, curved sunshade, ramp of any curved shapes and curved slab bottom and sides in elevation features and structures .

Extra for additional height in centering, shuttering wherever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.30 m

MASONRY WORKS Providing and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 using standard size of 400 x 200 x 200 mm thick Foundation and Plinth / Basement Level Solid block of size 400 x 200 x 200 mm

Solid block of size 400 x 100 x 200 mm

Providing and constructing Autoclaved Aerated Concrete block masonry work using standard size of AAC blocks. Blocks manufactured under strict quality control conditions confirming to IS standards only shall be us I) For 200mm thick AAC block wall - CM 1:5 a) Ground Floor

b) First Floor

c) Second Floor

d) Third Floor

e) In Fourth floor

f) In Fifth floor

g) Terrace Floor

II) For 100mmthick AAC block wall - CM 1:3 a) Ground Floor

b) First Floor

c) Second Floor

d) Third Floor

e) In Fourth floor

f) In Fifth floor

g) Terrace Floor

III) For 150mm thick AAC block wall - CM 1:5 a) Ground Floor

b) First Floor

c) Second Floor

d) Third Floor

e) In Fourth floor

f) In Fifth floor

e) Terrace Floor

Providing and constructing of brick work in Cement Mortar 1:5 using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 41/2" x 3" with minimum compressive strength of 35 Kg per Sqcm for foundation and all floors a) Ground Floor

b) First Floor

c) Second Floor

d) Third Floor

e) In Fourth floor

f) In Fifth floor

g) Terrace Floor

Providing and constructing of 115 mm thick brick partition walls in Cement Mortar 1:3 using best quality Second Class Ground Moulded Chamber Burnt bricks of size 9" x 4 1/2"x 3" with hoop iron reinforcement a) Ground Floor

b) First Floor

c) Second Floor

d) Third Floor

e) In Fourth floor

f) In Fifth floor

g) Terrace Floor

JOINERY WORKS Providing and fixing of well seasoned, best available Country , vengai wood frame equialant for doors, windows, ventilators and any other similar joinery works

Providing and fixing of well seasoned, best available teak wood frame for doors, windows, ventilators and any other similar joinery works Upto 2m length

2 to 3m length

Internal Doors Frame : Supplying and fixing Door Frames using Teak Wood of quality and size as per the specification/drawings attached including planning, providing plaster groove, Size 1000x2150mm

Size 900x2150mm

Size 750x2150mm

Supply and installation of Hardware for the flush doors with necessary accessories for complete installation., Working at all levels and heights Encoding station for programming keys

Portable Data Device

Lobby Main Door (MD) Double leaves DC 301 Door Closer Arm Size 3/4 With Hold Open

Euro Profile Double Cylinder, 35.5+35.5 = 71mm, Non-Masterkeyed

Narrow Dead Lock, Backset 35mm, C/C 92mm, Width 50mm

Euro Profile Cylinder Escutcheon, Oval

Crank Pull Handle, 22mmDia, 300mmC/C, Glass / Wood Door Max. Door Thickness - 8-14mm

2BB FLUSH HINGE WS SS 304,5"X3mm SSM

Automatic Drop Down Door Seal 920 mm Cut To Size 820 mm

Fire rated door Ball Bearing Butt Hinge SS304 102X76X3mm (4 X 3 X 3) Square corner With Metal Door Screw Fire rated SSM

DIY 78 Surface Mount Door Closer Standard Arm Non Hold Open Fire Rated EN2/3/4 CE Dr Wt upto 80 kgs Dr width 850-1100mm-Aluminium

Single Point Panic Exit Device 1300mm Pushbar Aluminium GreySET

Outdoor Lever Handle Aluminium GreySET

Mortise Deadlock 55mm BS 24 mm Sq Forend Fire Rated SS 304 SSM (Large Case 84x165 mm)

M5 X 15 SS 304 Metal Door Screws

Euro Profile Double Cylinder 35.5+35.5 = 71mm Brass SN

EPC Escutcheon Round SS 304 SSM

M4 X 15 SS 304 Metal Door Screws

Pull Handle Back To Back Fixing 25mm dia X 300mm C/C Max. Door Thickness - 50mm Straight Series SS304 SSM

Flush Bolt for Metal Door 304mm SS 304 SSM

M4 X 15 SS 304 Metal Door Screws

Dust Proof Strike SS 304 NM

Flush Door Ball Bearing Butt Hinge SS304 102X76X3mm (4 X 3 X 3) Square Corner With Timber Door Screw SSM

DT 50 RFID hotel guest room door lock, SS Matt finish. (Handing of the doors to be advised during final order). DIN LEFT/RIGHT

RFID Guest Keycard Plain White

Cylindrical Knob Lock WC Function Rose Dia 75 mmDr Thick 30-45mmBS 60mmSS 304 SSM

DIY 78 Surface Mount Door Closer Standard Arm Built in Hold Open EN2/3/4 CE Dr Wt upto 80 kgs Dr width 850-1100mm-Aluminium

SS Door Coordinator

Mortise Dead Lockcase 55mm BS 24mm Forend SS 304 SSM ( Case Size 84x95mm)

Euro Profile Double Cylinder 35.5+35.5 = 71mm Brass SN

EPC Escutcheon Round SS 304 SSM

Pull Handle Back To Back Fixing 25mm dia X 300mm C/C Max. Door Thickness - 50mm Straight Series SS304 SSM

Flush Bolt for Timber Doors 19x300mm SS 304 SSM

Dust Proof Strike SS 304 NM

Supply and fixing Fire rated door 2hr. rating hollow metal doors - Powder Coated with vision panel of size 200 x 300mm. a)2 hrs. Fire rated hollow metal doors - Powder Coated single leaf door of size 1500x2150mm with vision panel of size 200 x 300mm.

b) 2 hrs. Fire rated hollow metal doors - Powder Coated single leaf door of size 900x2150mm with vision panel of size 200 x 300mm.

UPVC Sliding Window with SS mesh Providing and fixing of Two and half track Sliding Window with SS Mesh using 108mmx 47mm outer frame a) Size 1500x1250mm

b) Size 1200x1250mm

c) Size 900x1250mm

d) Size 1500x950mm

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mmx 58mmand shutter profile size of 60 x 78mm

IRON AND STEEL WORKS Manufacturing, Supplying and Fixing of Stainless Steel Handrails for staircase using 50mmdia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mmfrom finished floor level

Wall Handrail Manufacturing, Supplying and Fixing of Stainless Steel Handrails for staircase near wet riser using 50mmdia 304L Grade Stainless Steel pipe of 1.60mm thick

Supplying, fabricating, erecting and fixing in position Monkey ladders and all miscellaneous steel works

Providing and fixing welded M.S. grills for the window openings and any openings

FLOORING WORKS Providing and laying in panels not more than 20 sqm. in plan Granolithic flooring with cement concrete 1:1.5:3

Providing and applying 6mm thick Polyurethane Flooring, seamless, solvent-free, moisture insensitive and anti-microbial polyurethane concrete flooring system, matching below mentioned performance properties:

Supply and application of epoxy flooring at 3 mm thickness with epoxy underlay screed using of approved make at 2 mm thick over a priming layer of prime 25. Overlay the topping using approved make Epoxy of 1 mm thick

Providing and fixing of flooring with quality approved make of Double charged vitrified tiles - Polished / Matt (seamless joint) confirming to IS 13006/EN 176

Providing and fixing of flooring with best approved quality of vitrified tiles of various sizes over a base layer of cement mortar 1:4

Supply and laying with best quality the following materials of Machine Polished granite slab for wash basin counter top of 18 to 20mm thick (Jet Black) including cutting for wash basin and edge polishing to be set in CM 1:4 20 mm thick

Supply and Laying flooring with best quality of Granite slab leather finish 18 to 20mm thick (Steel Grey, Sira Grey, Ruby Red, SK Blue, Raw silk, Antique Brown) of size not less than 1200 x 600 mm machine cut with approved pattern in a single colour/multiple colour and set in C.M 1:4

Supply and Laying flooring with best quality approved colour Granite slab Polished finish 18 to 20mm thick (Green teak, Fox brown, Royal brown, Ruby Red and Raw silk) of size not less than 1200 x 600 mm machine cut with approved pattern in a single colour/multiple colour and set in C.M 1:4 20 mm thick

Supply and Laying flooring with best quality approved colour leather Granite slab 18 to 20 mm thick in a single piece (Sira grey) for each step for the entire width of the stair, machine cut and machine high pre-polished, set in C.M 1:4 20 mm thick

Supply and Laying with best quality approved Kotah stone slab not less than 20 mm thick and the size of slab in general not less than 1200 x 600 mmmachine cut and machine high pre-polished, set in C.M 1:4 , 20 mm thick

Supply and Laying with best quality approved Kotah stone slab not less than 20 mm thick in a single piece for each step for the entire width of the stair machine cut and machine high pre-polished, set in C.M 1:4 20 mm thick

Providing flooring with best quality approved make White ceramic tiles ranges, Size of tiles shall be 6mm thick of 300 x 300 mm size set in CM 1:4, 20mm thick

SKIRTING WORKS Supply and Laying Double charged vitrified skirting 100 mmhigh of same approved flooring tile set in C.M 1:3 12 mm thick

Supply and Laying 100 mm high skirting with best quality approved Kotah slab of thickness not less than 20 mm, machine cut and machine high pre-polished set in cement mortar 1:3 12 mm thick

Providing and fixing of 75mm height Anodized Aluminum Skirting over partition, columns and walls with all accessories.

Providing 100 mm high skirting with best quality approved granite slab of thickness not less than 18 mm, machine cut and leather finish set in cement mortar at all levels

WALL DADO Supply and Fixing Dadoing with best quality polished vitrified tile of approved make set in C.M 1:3 12mm thick

Providing dadoing with machine cut polished best quality approved colour granite slab (Synthetic grey, Parasise colour) of thickness not less than 20mmof size 1200x600 / 900x600 mm, set in C.M 1:3, thickness not less than 20 mm

Supply and fixing wall dado with best quality approved make White Glossy ceramic tiles sizes 300 x 300 mmx 6 mmthick set in CM 1:3 10mm thick

Providing Dadoing with best quality Ceramic tile of approved make and size set in cement mortar 1:3

PLASTERING WORKS Plastering of 12 mm thick for Internal walls with cement mortar 1:5

Plastering 15 mm thick for external surfaces with C.M1:5 including water proofing compound of “CICO No.1 or equivalent

Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas, RC walls etc.. with Cement Mortar 1:3

Providing 12 mm thick water proof plaster in Toilet internal walls and over head tank with CM 1:3 with water proofing compound of CICO No:1/ equivalent

Providing and applying three coats of Acrylic emulsion paint, with low VOC as per GS-11, anti fungal and washable of approved colour over a coat of water based primer

Providing and applying three coats of Acrylic emulsion paint,excluding cost of putty (Wall & Ceiling Painting)

Applying white washing three coats to ceilings and walls with pure shell lime or fat lime conforming to IS-712

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality

Providing and applying Texture paint finish for exterior / interior surface.

WATER PROOFING WORKS Supply and laying of respective water proofing treatment on top of PCC laid for grade slab,raft ,pile cap, footing & beam, UG sump, water tank with water proof compound CICO NO.3/Equivalent

Supply and applying water proofing treatment on Retaining walls external surface at Lift wall, UG Sump, Water tank, Raft sides etc. using cement admixed with water proofing compound CICO No.3/Equivalent

Supply and laying water proofing treatment Internal surface of Lift wall, water tank with water proofing compound CICO No.3/Equivalent

Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet

Supply and grouting the gaps around the pipes at any dia should be filed in order to provide a proper bond and fill up the hole with CICO GROUT - GP Polymer Based Non-Shrink Grout

Supplying and filling the sunken slab area by BRICK-BATCOBA by adding CICO NO:1 / equivalent admixture

Supply and laying water proofing treatment for bottom of over head tanks using Waterproofing compound CICO NO.3 /equivalent

Supply and laying water proofing treatment of internal walls Over head tanks, Water tanks with Waterproofing compound CICO NO.3 /equivalent

TERRACE WATERPROOFING: Supply and laying water proofing treatment for terrace using Waterproofing compound CICO NO.3 /equivalent

Supply installation and finishing of the Terrace floor with one course of Thermatek tiles of size 300x300x19mm laid on top. in 20mm thick C.M.1:4 and pointing with approved make epoxy grout

MISCELLANEOUS WORKS Supplying and fixing Poly-propylene rungs of 25 mm square bar of size 260 x 170 mm for access way including anchorage in walls to a minimum depth of 100 mm with C.C 1:2:4

Supplying and fixing Ductile Iron manhole cover with frame as per approved make for O.H tank a)Manhole Cover 60 x 60cm (Heavy Duty) with Frame

Providing and laying in position the RCC hume pipes(NP3) of approved quality and make including collars,. necessary Excavation, PCC 1:2:4 a) 300mm dia NP3 class Hume pipe

Special Type Mirror of size 1000 x 780mm

STRUCTURAL STEEL WORKS: Supplying fabricating, hoisting, erecting and fixing in position Mild steel structural steel works Gate for compound wall and grill at all elevations, levels and heights

Designing, Providing and fixing in position Hot rolled structural steel Members / Sections consists of MS joists, channels, angles, purlins, pipes, hollow tubes, runners, insert plates, flats etc. at all levels.

Supplying, fabricating and placing in position M.S. chequered plate of required thickness of 5 mm for machine floors and shafts closing at all floors at all levels with necessary supports such as M.S. angles/M.S. flats

Supplying and filling 40 mm and down aggregate filling under drains. Including shuttering,

Partition & Panelling Works Aluminium glazed stile door with alterralite system-100 frame profiles Supply & Fixing of Aluminium Glazed Door Single Leaf with Glass infill of 12mm Thick toughened glass

Single glazed toughened glass partitions - with alterralite system- 100 frame profiles Supply and Fixing of Single Glazed Glass partition of 12mm Toughened Glass using Dormakaba ALTERRALITE System-100 Frames to a height of maximum 4m

False Ceiling Works (Toilet) Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level

PASSENGER LIFTS (G+3) Design, Manufacture, supply, delivery, installation, testing and commissioning of Passenger Lift (car size 200x1100mm) (Brand: Johnson / Kone / OTIS or equivalent) of capacity 13 persons / 884 kgs Gearless Lift without Machine Room

Further increase of rate per floor for every additional floor form the Design, Manufacture, supply, delivery, installation, testing and commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 13 persons / 884 kgs

ROAD WORKS Preparation of sub-grade and compacting with vibratory roller having minimum 8 - 10 ton vibratory power roller static weight to achieve desired density of not less than 98% of MDD

Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers Morth - Rev V No. 111,112,401,900

Supplying and laying hydraulic pressed rubber moulded paver Block (zig zag and 'I' block etc.,) of made from M40 concrete - 63 mm thick

Providing and fixing vacuum wet press concrete precast Splay kerb to shape by using reinforced cement concrete M20 grade road kerbs of size 150X375X600mm

Supply and Delivery of Loose Furniture and Chairs including cost of transportation charges and ect. RECEPTION FURNITURE Waiting Lounge Chair (2 seater Bench) Size: 1595 mm W x 570 mm D x 810 mm H HNI Make or Equivalent Including cost of Packing & forwarding charges

MODEL:Fluence Chair; Specification:- Back Height - Medium Back Back Finish - HNI Mesh with adjustable lumbar support Including cost of Packing & forwarding charges

CANTEEN Center Tables - Rectangular Size : 1200 W x 750 D x 750 Ht Table top :25 mm thick. MDF Postlam Table Top With Flat Edge PVC Lipping. Legs :Metal powder coated legs with connecting cross members Including cost of Packing & forwarding charges

MODEL: ICE Chair Specification:- Shell Shape - Straight Back Finish - Plastic Seat Finish - Plastic Base Type - 4 leg with bush Stackable upto 5 high WARRANTY: 1 Years from the date of invoice Including cost of Packing & forwarding charges

ROOMS BED (Without Mattress) Sonoma Metal Cot Size : 955 X 1900 X 750 mm HT Including cost of Packing & forwarding charges

SIDE TABLE Prelam Pedestal Size : 400 x 450 x 520mm HtTop , Side panels and Facia : 18mmThick prelam particle board with flat edge Including cost of Packing & forwarding charges

STUDY TABLE (Stava Table) Size : 1800 x 600 x 745mm Ht Table top , Top and bottom Panel 18 mmThick Prelam particle board MS Powder coated 40 x 20 loop leg under structure Grommet Hole for cable Management Including cost of Packing & forwarding charges

STUDY CHAIR Budd Chair Seat & Back : Thick cushioned seat and back (Black faux leather) Overall Dimensions : 815H x 618W x 615D Including cost of Packing & forwarding charges

VENTILATION FANS Supply installation ,testing , & commissioning of Centrifugal Modular Type metal boddy Propeller fan of approved brand with all accessories like fan, motor, flanges , gravity louver etc. 300CFM (Toilet Exhaust )

OUTDOOR MOUNT TYPE CABINET FAN Supply installation testing & commissioning of Exhaust air fan -3500 CFM - 35 mm external static cabinet type fan (Kitchen exhaust). Floor mounted/Ceiling mounted type

Supply installation testing & commissioning of Fresh air fan with prefilter (5 Micron ) -3000 CFM - 25 mmexternal static cabinet type fan (Kitchen fresh air fan). Floor mounted/Ceiling mounted type

Supply and fixing of Flexible Canvas Connection

Supply, Fabrication, Installation and Testing of galvanized sheet metal with 120 GSM ducts (FACTORY FABRICATED BOX TYPE DUCTS) a)Thickness 0.63 mm sheet- 24 Gauge

b) Thickness 0.80 mm sheet- 22 Gauge

Supplying & fixing of powder coated extruded aluminium Supply Air Grills without aluminium volume control dampers as per specifications.

Supplying, Fixing,testing and commissioning of Aluminium manual operated Volume control dampers in supply air branch of required

Supply and fixing Collar Dampers of opposed blade type made out of Aluminium alloy extrusion with anodised matt black finish

Supply and fixing Back draft damper for all room dual units/source-18 Guage

Associated Civil Works Chipping, chassing & Plastering the wall openings in cement mortor 1:5 of 12 mm thick

SANITARY FIXTURES & CP FITTINGS Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality

Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm“P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia

Supply, Installing, testing and commissioning of Wash Hand Basin White without Pedastal with all accessories

Supply, Installing, testing and commissioning of CP Health Faucet with CP Two Way Bib Cock Health Faucet (ABS)- Model no: Q503192520/Equivalent

Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS. 110mm dia

Supply, installation and fixing of stainless steel toilet paper holder 150 x 150mm with aluminium roller.

Supply, Storing and fixing of ABS body Liquid soap dispenser with SS screws on the wall.

Supply, Storing and fixing of Stainless steel body paper towel dispenser with SS screws on the wall.

Supply, installation and fixing of Robe hook with PVC rawl plug & C.P. brass screw complete as required.

Supply, Installing, testing and commissioning of stainless steel sink size 600 mmx450mmx200mm,

Supplying, Installing, testing and commissioning of shower set including exposed wall mixer, spout and over head showers Shower arm 220mm- Model no:Q503152220 /Equivalent

PART-B INTERNAL SOIL AND WASTE WATER SYSTEM Supplying, fixing and testing of approved make of 10kg PVC pipes confirming to IS 4985-2000 a) 40mm dia

b) 50mm dia

Supply and fixing , Testing and Commissioning of PVC pipes Type-B confirming to IS- 13492 soil,waste & rainwater pipes a) 75mmdia

b) 110mmdia

Providing & fixing in position deep seal multiway PVC floor Trap with cockroach trap and PVC extension piece of required length depth

Supply, fixing and testing of PVC Floor cleanout (150x150mm) . For removing Clogging, etc.,

Supply, fixing and testing of Ceiling cleanout. For removing Clogging, etc 110 mm dia

Supply and fixing of cockroach trap grating , complete as per specifications. Square Drain Jali (5x5) "Angular"- Model No:F860058SS / Equivalent

INTERNAL & EXTERNAL WATER SUPPLY Supply, installation and testing of CPVC pipes and fittings SDR-11 (upto 50mmdia) conforming to ASTM D 2846. CPVC fusion compound shall conform tro ASTM F493. a) 20mm dia

b) 25mm dia

c) 32mm dia

Supplying, installing, testing & commissioning (UPVC) pipes as per ASTM D 1785 Schedule 40 and socket fittings confirming to ASTM D 2464-13 both of approved make having thermal stability for hot & cold water a) 20mm dia

b) 25mm dia

c) 32mm dia

d) 40mm dia

e) 50mm dia

f) 65mm dia

Supplying and fixing in position first quality and approved variety of Gun metal gate valve / wheel valve with BIS make of the following dia a) 20mm dia

b) 25mm dia

c) 32mm dia

d) 40mm dia

Supply ,Installing, testing and commissioning Air release valves confirming to IS standard 13039 with necessary flanges, nuts and bolts 20mm dia

Supply, installation, testing and commissioning approved make CI Non -return valves conforming to IS: 778 with necessary companion flanges, neoprene gaskets(10Kg/sq.cm. pressure rating) nuts and bolts a) 40mm dia

b) 20mm dia

Supply, installation, testing and commissioning approved make CI Y-type Strainer conforming to IS standard with necessary companion flanges, neoprene gaskets (10Kg/sq.cm. pressure rating) nuts and bolts a) 40mm dia

RAIN WATER DOWNTAKE SYSTEM Supply, installation, testing and commissioning of PVC Khurra with CI Grating - L type with necessary accessories a) 110mm dia

Supplying and construction of Rain water recharge pit with filter media, recharge bore, top slab complete as approved recharge pit drawing 1200mm dia and 1500mm deep

EXTERNAL DRAINAGE Supply and fixing , Testing and Commissioning of PVC pipes Type-B confirming to IS- 13492 soil ,waste pipes & rainwater jointed with solvent cement of good quality lubricant a)110mm dia

Supplying, laying and testing SWR PVC- B Class pipe confirming to IS 13592-1992 and 6kg UPVC Pipes for 200/250/315/400 mm dia confirming to IS 4985 - 2000 for underground drainage and sewerage systems - pipes in trenches to required gradients,burried in ground level a) 75mm dia

b) 110mm dia

c) 160mm dia

Supplying, fixing and testing PVC gully trap (Rate Should Includes Cover ) of size 300mmx 300mm with rebated top square bodies 150mmx 150mm, CI grating 100mm dia

Construction of inspection chamber a) 600 x 800 mm up to 1200 mm deep

b) 900 x 800 mm up to 1500 mm deep

SUPPLY & INSTALLATION OF LUMINAIRES Supply, Installation, Testing and Commisioining of surface mounted down light 15W LED fittings with all accessories SM296B LED15S 4000 PSU of approved brand

Supply, Installation, Testing and Commisioining of surface mounted down light 10W LED fittings with all accessories DN295B LED10S 4000 PSE

Supply, Installation, Testing and Commisioining of surface mounted 20W Linear LED Fittings with all accessories and fixing TWIN GLOW

Supply, Installation, Testing and Commisioining of Wall mount 15W LED Fittings with all accessories and fixing CAT:581879

Supply, Installation, Testing and Commisioining of Wall mount 18W LED Fittings with all accessories and fixing CAT: 581880

Supply, Installation, Testing and Commisioining of Wall mount 12W LED Fittings with all accessories and fixing CAT: 31455

Supply, Installation, Testing and Commisioining of Bulk Head light 11W LED Fittings with all accessories and fixing WT140 LED7S CW

Supply, Installation, Testing and Commisioining of Bulk Head light 11W LED Fittings with all accessories and fixing WT140 LED7S NW

Supply, Installation, Testing and Commisioining of surface mounted 20W Linear LED Fittings with all accessories and fixing BN170 LED20S CDL

Supply, Installation, Testing and Commisioining of surface mounted 20W Linear LED Fittings with all accessories and fixing WT150 LED20S IP65

WIRING FOR LUMINAIRES Supply, Laying, Testing and Commisiosning of 2R 2.5S.mm1R 1.5S.mm PVC insulated FRLS multistrand copper wire in Fully Concealed PVC Rigid conduit pipe heavy duty with ISI mark

MAIN LIGHT WIRING (PP) Supply, Laying, Testing and Commisiosning of 3R 1.5S.mm PVC insulated FRLS multistrand copper wire in Fully Concealed PVC Rigid conduit pipe heavy duty

SECONDARY LIGHT WIRING (SP) Supply, Laying, Testing and Commisiosning of 3R 1.5Sqmm PVC insulated FRLS multistrand copper wire in Fully Concealed PVC Rigid conduit pipe heavy duty

Supply, Laying, Testing and Commisiosning of 2R 2.5Sqmm+ 1R 1.5Sq.mm PVC insulated FRLS Grey colour multistrand copper wire with 25mm dia Fully Concealed PVC Rigid conduit pipe heavy duty

POWER OUTLETS (SOCKETS) Supply, Fixing, Testing and Commisiosning of 2 nos 6A 3/5 pin shurtred Universal Type socket

Supply, Fixing, Testing and Commisiosning of 1 no 6A switched socket with moulded front plate GI anodised enclosure

Supply, Fixing, Testing and Commisiosning of 1 no 16/6A switched socket with moulded front plate GI anodised enclosure

Supply, Fixing, Testing and Commisiosning of 1 no 16/6A switched socket with moulded front plate GI anodised enclosure

Supply, Fixing, Testing and Commissioning of 1 no 6A switched socket with moulded front plate GI anodized enclosure .(for UPS POWER)

Supply, Fixing, Testing and Commissioning of 1 no 16/6A switched socket with moulded front plate GI anodized enclosure

Supply, Fixing, Testing and Commisiosning of 100A TPN RCCB 100mA enclosed in weather proof MS Enclosure (TERRACE AC PANEL)

Supply, Fixing, Testing and Commisiosning of 63A TPN RCCB 100mA enclosed in weather proof MS Enclosure (TERRACE AC PANEL)

Supply, Fixing, Testing and Commissioning of 40A DP MCB enclosed in Enclosure

Supply, Fixing, Testing and Commissioning of 40A TPN MCB enclosed in Enclosure

Supply, Fixing, Testing and Commissioning of 63A TPN MCB enclosed in Enclosure

Supply, Fixing, Testing and Commissioning of 32A, 3 pin industrial type interlocked switched socket outlet with 32A DP MCB

Supply, Fixing, Testing and Commissioning of 3KVA 1 phase UPS - 230 Volt ,50 Hz, AC input and output 230 Volt AC ,50 Hz,sine wave ; 90mins.full load Back-up with maintenance free battery with stand

Supply, Fixing, Testing and Commisiosning of 32A DP MCB enclosed in weather proof MS Enclosure (Master Control MCB)

WIRING FOR POWER MAIN POWER WIRING (PP) Supply, Laying, Testing and Commisiosning of 2R 4Sqmm+ 1R 2.5S.mm PVC insulated FRLS multistrand copper wire PVC conduit

SECONDARY POWER WIRING (SP) Supply, Laying, Testing and Commisiosning of 2R 2.5Sqmm+ 1R 1.5S.mm PVC insulated FRLS multistrand copper wire PVC conduit

CEILING FAN Supply and installations of 230V, 50HZ, 1200mm blade length, with other necessories , Chasing, embeding, Plastring required as oer site conditions.

Supply, installation, testing and commissioning of exhaust fan up to 300mm sweep in existing opening including making holes / suit the size of the above fan,

Supply, Laying, Testing and Commisiosning of 2R 2.5Sqmm+ 1R 1.5S.mm PVC insulated FRLS multistrand copper wire in existing PVC conduit with all accessories

SECONDARY DISTRIBUTION SYSTEMS Supply, Installation, Testing and Commisioining of three phase, phase segregated, compartmentalised 8 way MCB DB Double door type, IP 42 powder coated comprising of "C" curve MCB's for LIGHTING DB.

Supply, Installation, Testing and Commisioining of three phase, phase segregated, compartmentalised 8 way MCB DB Double door type, IP 42 powder coated comprising of "C" curve MCB's for POWER DB.

Supply, Installation, Testing and Commisioining of single phase, 12 way MCB DB Double door type, SPN DB IP 42 powder coated comprising of "C" curve MCB's for EMERGENCY LDB.

Supply, Installation, Testing and Commisioining of three phase, phase segregated, compartmentalised 8way MCB DB Double door type, IP 42 powder coated comprising of "D" curve MCB's for UPS DB.

Supply, Installation, Testing and Commissioning of three phase, IP 43 powder coated comprising of KITCHEN DB

Supply, Installation, Testing and Commisioining of Three phase, 8way TPN MCBDB Double door type, IP 42 powder coated comprising of "D" curve MCB's for COMMON VTPN DB

Supply, Installation, Testing and Commisioining of Three phase, 8way TPN MCBDB Double door type, IP 42 powder coated comprising of "D" curve MCB's for LIFT DB

PRIMARY DISTRIBUTION SYSTEM Supply, installation, testing & commissioning of EB CT METERING PANEL made of 16/18 SWG CRCA sheet steel

Design, manufacture, testing at works, transportation to site, unloading, storing, leading, erecting, testing & commissioning of Auto Power Factor Correction Relay (APFCR-75KVAr) suitable for 415Volts 3Phase 4wire system, fabricated from 14/16SWG CRCA sheet steel

Design, manufacture, testing at works, transportation to site, unloading, storing, leading, erecting, testing & commissioning of MAIN PANEL

Design, manufacture, testing at works, transportation to site, unloading, storing, leading, erecting, testing & commissioning of LSB

Design, manufacture, testing at works, transportation to site, unloading, storing, leading, erecting, testing & commissioning of HVAC PANEL

POWER CABLES AND CABLE TERMINATION Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Aluminium Armoured cable XLPE a) 3.5C 300 sq.mmXLPE Armoured Aluminium Cable

b) 3.5C 300 sq.mm XLPE Armoured AluminiumCable terminations

c) 3.5C 185 sq.mm XLPE Armoured Aluminium Cable

d) 3.5C 185 sq.mm XLPE Armoured Aluminium Cable terminations

e) 3.5C 150 sq.mm XLPE Armoured AluminiumCable

f) 3.5C 150 sq.mm XLPE Armoured Aluminium Cable terminations

g)3.5C 50 sq.mm XLPE Armoured Aluminium Cable

h) 3.5C 50 sq.mm XLPE Armoured Aluminium Cable terminations

i) 3.5C 35 sq.mm XLPE Armoured Aluminium Cable

j) 3.5C 35 sq.mm XLPE Armoured Aluminium Cable terminations

k) 4C 25 sq.mm XLPE Armoured Aluminium Cable

l) 4C 25 sq.mm XLPE Armoured Aluminium Cable terminations

m) 4C 16 sq.mm XLPE Armoured Aluminium Cable

n) 4C 16 sq.mm XLPE Armoured Aluminium Cable terminations

p) 4C 10 sq.mm XLPE Armoured Aluminium Cable

q) 4C 10 sq.mm XLPE Armoured Aluminium Cable terminations

Copper Armoured cable a) 4C 10 sq.mm Armoured. Copper Cable YFY

b) 4C 10 sq.mm Armoured. Copper Cable YFY terminations

c) 3C 10 sq.mm Armoured. Copper Cable YFY

d) 3C 10 sq.mm Armoured. Copper Cable YFY terminations

e) 3C 6 sq.mm Armoured Copper Cable YFY

f) 3C 6 sq.mm Armoured. Copper Cable YFY terminations

Copper Unarmoured cable (UPS SYSTEM and EARTHING) a) 1C 10 sq.mm Copper Cable YY

b) 1C 10 sq.mm Copper Cable YY terminations

c) 1C 6 sq.mm Copper Cable YY

d)1C 6 sq.mm Copper Cable YY terminations

e) 1C 4 sq.mm Copper Cable YY

f) 1C 4 sq.mm Copper Cable YY terminations

CEILING CABLE MANAGEMENT SYSTEM Supply and Installation of GI Ladder cable trays arch welded a) 150X50mmCable Tray

b) 450X50mmCable Tray

Supply and Installation of GI Perforated cable Tray including tees,right angle bends,etc., a) 150X100mmCable Tray

b) 300X100mmCable Tray

EARTHING Designing, S I T & C of earth station as per IS 3043, with proper earth lead connection arrangements a) With 600 x 600 x 3mmCopper plate electrode

b) With 100mmdia 3M long CI Pipe electrode

Chemical Earthing Copper Coated: T-39 Cu. (80mm dia) - 3 mtrs with Back Fill Compund (25 kgs per Bag) includes Providing of RCC Chamber and Civil finishing including painting.

EARTH FLAT BUS Supply & Laying of 50x6mm GI. Flat

Supply & Laying of 50x6mm CU. Flat

Supply & Laying of 25x6mm CU. Flat

Supply & Laying of 25x3mm GI. Flat

Supply & Laying of 25x6mm GI. Flat

Supply & Laying of 10 SWG bare Cu. Wire

Supply and Installation of 12 way 25x3mm copper earth bus with all accessories as required.

LIGHTNING PROTECTION Supply, installation, testing & commissioning of Conventional type Lightning protection system with complete set

SERVO STABLISER Supply, Installation, Testing and Commissioning of 200 KVA, wide range (265 - 465V) Air cooled servo stabilizer as per the specification.

UPS & BATTERY 5 KVA double converson UPS with Internal isolation transformer, two input sources with IGBT, anti harmonic filters of THD<3%.

Sealed Maintenance free batteries for 20 minutes battery backup at full load for the above UPS with battery cubicle, isolator and associated accessories

SAFETY EQUIPMENTS 1100V Rubber mat as per latest IS

First Aid Box

First Aid Chart (English & Local language)

ASSOCIATED ACCESSORIES Supply and fixing of 2mm thick PVC/MS conduit of various dia., exposed or concealed, with all accessories a) Supply and Fixing of 20mm PVC Conduits

b) Supply and Fixing of 25mm PVC Conduits

c) Supply and Fixing of 20mm MS Conduits

Supply and Installation of M.S. Material for ladder type cable trays, cable supports, SB, DB's supports, iron embeded in the wall, steel structure in open Area painted with two coats of primer and two coats of enamel paint.

Supply and arranging for Temporary Power Supply for lighting and other contract agencies at site including sufficient no of tube light fittings, plug points with plug tops with adequate distribution boards and all other necessory safety devices like ELCB, etc

SHOP DRAWINGS, INSPECTION AND APPROVALS Preparation of Shop drawings as per site conditions based the GFC drawings, Obtaining approval from Statutory Authorities

Supply and fixing of 62.5 KVA, DG set , LT, 415V, 0.8PF, DG-Stand by Duty with outdoor Acoustic enclosure, with noise level of 75dBA at 1Mt. Enclosure shall be with Necessary ventilating equipments like fresh air/exhaust fans with all accessories required.

Exhaust System Supply and laying of Exhaust Piping Class "B" MS exhaust piping of adequate size with flanges, hardware and painting, with necessary thermal insulation.for 62.5KVA D.G.Set with suitable dia exhaust pipe

Earth Electrodes and Earth Strips Supply and laying GI earth strips on cable tray or below ground as per site condition. Earth strip joints should have welded joints only a) 25 x 6mm Copper Strip

b) 40 x 6 mm GI Strip

c) 8SWG CU Wire

Supply & erection of 100mm dia Cast Iron earth electrode of10' length buried in ground as per IS with necessary connecting clamps, watering arrangement &fasteners etc. The pit shall be filled with alternate layers of salt &charcoal.

Generator control AMF panel comprising MCCB's, Generation protection relays, KWH meters,Digital load monitors etc., AMF panel

Providng Steel supports for exhaust pipe, Residential silencer installation etc using ISMC, ISA Steel sections complete including painting with red oxide primer and black enamel paint.

CONVENTIONAL FIRE ALARM SYSTEM Supply, installation, testing and commissioning of Micro Processor based conventional 8 Zone Fire Alar Control Panel suitably mounted on wall

Supply, installation, testing and commissioning of Electronic Hooter / Sounder, 24V, providing on Ceiling/ Flush wall mount including accessories

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall including all accessories

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall including all accessories

Supplying, installing, testing and commissioning of approved make FRLS PVC conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends, clamps, saddles etc. (for MCP) 25 mm dia.

Supplying and laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height (Cable dressing inside the shaft )

PUBLIC ADDRESS SYSTEM Supply and installation of 6W Wall Mounted box Speakers with line matching transformers

Supply and installation of Rack Mounted 240 W Power Amplifier

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps,

Supply and installation of Volume controller for one speaker (near call station)

Supply and installation of Rack Mounted DVD Player as per specifications ,)

Supply and installation of Suitable size rack as per following specification, Conforms to DIN 41494 Or Equivalent EIA/ISO/EN/CEA Standard Finish - Powder coated finish with Seven tank pretreatment process meeting ASTM standard Color - Black/off white/grey Fan module on top of the rack

FIRE SIGNAGE SYSTEM Supply and installation of " FIRE EXIT " (AUTO GLOW TYPE) - SINGLE SIDE - FOR FIRE EXIT DOORS - 150*300mm with suspension chains (SS)

Supply and installation of ''Emergency Exit Signages - (Autoglow) size 150 x 300mm- double side with suspension chains (SS)

Supply and installation of " EXTINGUISHER Signages - Autoglow, with suspension chains (Autoglo signages, size 150 x 300) - double side with suspension chains (SS)

Supply and installation of " MCP Signages - Autoglow, with suspension chains (Autoglo signages, size 150 x 300 - double side with suspension chains (SS)

Supply and installation of " Hydrant - Autoglow, with suspension chains (Autoglow signages, size 150 x 300 - double side with suspension chains (SS)

Fire Evacuation Route Map as per following specification Preparation of drawing and providing, Autoglow Fire escape route map in clear acrylic glass and required glass studs supports etc. Indicating direction, Key plan, contact numbers etc

FIRE EXTINGUISHER SYSTEM Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc.,

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge,

Wet chemical stored pressure 6Ltr capacity including accessories, pressure guage and floor mounting accessories (kitchen - preparation area)

INTERNAL HYDRANT SYSTEM upply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm a) 150mm dia

b) 80mm dia

c) 25mm dia

Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 900 LPM at 40 metres head to develop 3.5 kg/sq.cm at the heightest and farthest hydrant point to make 30 m water jet

Supply, erection, testing and commissioning of Fire Fighting Application direct on line main control panel

Supply and laying of 4 core 10 sq.mm. armoured copper cable for power wiring to the Terrace Pump Motor

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line

Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water a) 150 NB

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water 150 NB

Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia

Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mmdia stainless steel

Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm(or) 20mm jet bore. Near every hydrant points

Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe

Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long

Supply and fixing in position of Fire Fighting Duct Window having proper glass window type double door

Supply, erection, testing and commissioning of Fire Fighting 2 Way Fire Brigade Inlet with necessary gun metal 63mm dia non-return spring shutter arrangements

Supply and fixing of MS Angle Supports with related accessories etc. (37.5 x 37.5 x 6.24mm)

Supplying and installation of Y type Strainer as per specifications including making flanged joints 150 NB

Supplying, installing, testing and commissioning of Gun metal chrome finished 25mm dia Ball valves with fittings of screwed end type.

Britto Dhanasekaran

Bidder Name

EEE PEE S AND CO

Britto Dhanasekaran