Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.1 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹35.0 L+₹1.3 L (3.88%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹35.5 L+₹1.8 L (5.27%)Rejected-Finance R H NO 14 ADITYA PALACE PATOLE MALE B H SUMAN HOSPITAL JAI BHAWANI ROAD NASIK ROAD 422102 | NASIK | NASHIK | MAHARASHTRA | 422102 | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹36.0 L+₹2.3 L (6.83%)Rejected-Finance ALPHA HOUSE PLOT NO 29 AGP P10 ASHWIN SECTOR NEW CIDCO NASIK 422 009 | NASHIK | MAHARASHTRA | 422009 | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹36.8 L+₹3.1 L (9.31%)Rejected-Finance 10 SANJAY HSG SOCIETY RACCA COLONY SHARANPUR ROAD NASHIK 422 002 | NASHIK | MAHARASHTRA | 422002 | L5 | Rejected-Finance Not lowest |
Tender Value
₹49.8 L
EMD Value
₹99,500
Closing Date
13 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Nasik Road
Garrison Engineer Nasik Road AOP Complex Near AOP Gate PO Gandhinagar Nasik 422006
As per Tedner Documents
2022_MES_559557_1
GE/NRC/8934/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer Nasik Road
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Nasik Road
₹99,500
Yes
20 Dec 2022
22 Oct 2022
15 Dec 2022
22 Oct 2022
13 Dec 2022
29 Nov 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed
Dismantling Mangalore pattern roofing tiles with ceiling tiles or slate roofing
Dismantling framed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed
M&L for coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm thick set and jointed in neat cement slurry nd pointed in coloured cement to match in floor etc complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately
M&L for glazed ceramic tiles coloured size 450 x 300 x 7mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed
M&L for rendering 15mm thick in CM 1:3 as in backing coat plaster on surfaces of brick masonary or stone masonary surfaces complete all as specifed and directed
M&L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed
Dismantling of stone slabs of any descripation or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed
M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. Note: screed bed layer, cement motar measured seperately
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with gray cement slurry with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed
Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate as in sub base / foundation filling mass concrete complete all as specifed and directed
Taking up or down 20mm dia tubes galvanized iron and connections and removing/shifting from site incl cleaning for refixing where directed complete all as specifed and directed
All as per same item No. 15.00 Above but 15 mm dia
Re-fixing only 20mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed
All as per same item No. 17.00 Above but 15 mm dia
S&F for tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of size 20 mm dia complete all as specified and directed.
All as per same item No. 19.00 Above but 15 mm dia
S&F in repairs cast iron Nhani trap with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) B-1 dia of outlet 75mm complete all as specifed and directed
S&F repairs bib taps standared of PTMT 15mm bore dia any colour high presure screwed for iron pipe of Make Prayag fixed and repairs (minimum weight 90 gms) complete all as specified and directed
Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. all as specified and directed
M&L for rendering 15mm thick in cement mortar(1:6) on brick masonry surfaces, concrete surfaces or fair faces of brick work and finishing even and smoothcomplete all as specifed and directed
M&L for rendering 15 mm thick cement plaster on other than fair faces of brick work or concrete surfaces in CM 1:4 and rendering is to be finished even and smooth without using extra cement adding water proofing compounder 3% by weight of cement
M&L for rendering 15 mm thick on stone masonry/fair faces of brick work or concrete surfaces other than fair faces of brick work in cement mortar 1:6 to be finished even and smooth without using extra cement
M&L for rendering 15 mm thick on other than fair faces of brick work in cement mortar 1:4 on walls to be finished even and smooth without using extra cement
M&L for 15 mm rendering in CM 1:4 on stone masonery wall rough finished surfaces as backing coat as directed by Engr-in-charge
M&L for preparation of new plastered surfaces of walls by washing, rubbing down,stopping and applying two coat of oil bound distemper over a coat chalk whitening primer prepatory to distemper on walls.
M&L for Preparing surfaces new plastered or unplassterd & applying 3 mm thick wall care putty incl priming plastered and other surfaces with alkali resistance priming paint coat as prepratory to distemper and M&L two coats of oil bound distemper white or tinted on walls.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
M&L for Preparation of newly plastered surfaces of any description and applying two coats of cement base paint on walls over a coat of chalk whitening primer complete all as specified and directed
M&L for complete removal of existing wall surfaces including preparation (i.e. brooming down on plastered / unplastered surfaces complete) and applying two coat of Acrylic weather proof exterior paint over water based primer(Make: APEX of Asian Paint or equivalent) complete all as specified and directed.
Complete removal of existing treatment and applying wall care putty incl primer coat as prepratory to distemper and two coats of oil bound distemper white or tinted on walls.
M&L for rendering 05 mm thick (1:3) on fair faces of concrete surfaces incl preparation to new surfaces on ceilings finished even and smooth without using extra cement
M&L for three coat of white wash including preparation of new surfaces on ceilings
Demolition of brick work/stone work built in cement mortar. including coping but except ashlar facing dressed stone work to precast concrete article complete all as specified and directed
Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillers etc but including ashlar facings, dressed stone work and precast concrete articles
M&L for Brick works with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specifed and directed
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for
Dismantling asbestos cement (corrugated,semi corrugated)sheets in roof covering
Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.
S&F rolled mild steel Joist, channel, angle, flat sections, fixed independently, without connecting plates, MS tubular sections etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe 290( E-165) all as directed by Engr-in-charge
S&F rolled mild steel plain angle cleats and plate for securing purlins to ragfter and similar small articals confirming to Fe-410-0 or Fe -310-0 complete all as specified and directed
M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm
S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.
Dismantling wall and ceiling boards( Fibre, pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified & directed.
S&F interlocking aluminium powder coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and S&F non asbestos cement building board 4mm thick of make E board classic of M/s Everest industries Ltd or equivalent make as approved, “in ceiling fixed with screw as per manufacturer instruction”
Taking down 100/75 mm dia PVC/CI sand cast soil, waste and vent pipes, in any length with or without ears etc in any position
S&F PVC (SWR) pipe single socketed 110mm bore any length with rubber ring joints fixed to wall complete all as specified & directed bore of pipe in mm complete all as specifed and directed
S&F PVC(SWR) bends 110 mm dia
S&F PVC(SWR) vent cowl of 110mm bore
S&F in repairs grating doom PTMT of 100mm dia complete all as specifed and directed
S&F in repairs Vitreous china squatting pan with PVC(SWR) 'P' trap of 125/110 mm bore,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)
S&F in repairs PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs with 32mm dia flush pipe complete all as specified and directed.
S&F Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors
S&F in repairs vitreous china urinal half stall type white including flushing cistern, flush pipe, waste pipe complete all as specifed and directed
S&F PVC connections 15mm size with PTMT nuts of length 300mm.
S&F in repairs stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed
Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each &removing from site
All as per item No. 62.00 above but exc. 1.5 Sqm and n.exc. 4.00 Sqm each.
S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, sup-plied and fixed to walls complete all as specified and directed.
S&F IInd class HW factory made 35mm thick plain framed panelled shutters (two panel) with lock rail, panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part I) Kiln, Seasoned and chemically pressure treated complete all as specified and directed.
ditto- all as above item No 65.00 but thickness of shutter30mm complete as specified in SSR Part-I Section8, clause 8.24 (b) all as specified and directed.
S & F Solid PVC frame of size 50mm x 95mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, with necessary arragement for fixing of glass for louvers type window/ventilator and additional PVC beading around the frame for fixing of wiremesh, S & F in opening all as specified and directed by Engr-in-Charge
S&F 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square n. exc. 0.5 Sqm in each panes.
S&F 100 mm Butt hinges,medium weight cold rolled Stainless steel all as specified & directed.
S&F 75 mm Butt hinges, medium weight, cold rolled mild steel & fixed completed all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing
S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.
S&F aluminium anodised barrel tower bolt of extruded section 100 mm long complete all as specified and directed.
S&F aluminium alloy barrel tower bolt 150 mm long
S&F 150 mm aluminium alloy handels cast/plate type
Supply & Fixing 100 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.
Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.
S&F in repairs Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S&F 300 mm aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section etc complete all as specified and directed by EIC.
Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar, for inserting holdfast and making good dismantled portion in cement portion depth of embeded portion of 1:3 or cement concrete 1:2:4 Type B1 as required
Hacking out old broken glass (any thickness, size and description) from metal frame including punching or drilling out old glazing pins/springsclips and providing and fixinh new ones.
S&F Sheet glass ordinary quility 3 mm thick nexc 0.5sqm each pane and glazing with oil putty complete all as specifed and directed
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specifed and directed
S&F Anodised powder coated aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat,Glazing clips,neopranes ribbin,rubber packing for fixing etc. complete all as specified and directed by Engr in Charge
S&F anodised powder coated aluminium Window shutters, sliding type without sash, aluminium section weighiging 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, screws, suitable handles and suitable locking arrangement, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr in Charge
S&F Sheet glass ordinary quality 4.0 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed
Taking down carefully existing bitumen tarfelt incl. Screed and cleaning of surfaces of roof etc. With wire brush incl. Flashing and junctions of parapets/kerb walls etc. And removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.
M&L for Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges or sub base
M&L for 100mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in flooring finished the surface even and smooth with using extra cement complete all as directed by EIC.
M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L for 75mm thick PCC 1:3:6 type C2 ( using 40mm graded stone aggregates) as in plinth protection finished even and fair without using extra cement all as specified.
M&L for 10mm thick plastering (screeding) in cement mortar 1:3 on concrete roof surfaces finished even and smooth without using extra cement and using Water Proofing Compound. Note : Water Proofing Compound shall be paid seperately.
Supply only intergral water proofing compound
M&L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. As under (a) Applying bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (c) Painting the exposed APP membrane surface with bituminous paint @ 0.15kg/sqm
S&F in repairs tubular rail curtain rod/towel rail, 20mm dia, Aluminium chroium plated complete all as specified and directed by EIC.
S&F Aluminium chromium plated brackets and ends fancy type for 20mm dia tubular curtain rod/towel rail complete all as specified and directed by EIC.
S&F vitreous china wash basin,white,flat back,size 450x300mm including cutting for and pinning in ends of brackets and waste coupling & waste pipe of 32 mm dia polythelene of low or high dencity or PVC complete all as specified and directed.
S&F in repairs of pillar taps of 15 mm bore chromium plated screwed down high pressure with long screwed shanks and fly nuts
M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directd
M&L for 75 mm thick PCC 1:4:8,type D-2(using 40mm graded stone aggregate)as in sub base to flooring finished even and fair without using of extra cement all as directed by EIC.
Demolition of breaking up drain pipes of RCC or salt glazed ware set in CM 1:4 of 150mm dia
M&L for cement concrete type C-2 1:3:6 ( 40 mm graded aggregate) as in foundation, filling and mass concrete.
M&L for PCC 1:2:4 type B2 as in surface channels and drains & benching of manholes and finishing even and smooth with out using extra cement.
S&F reinforced concrete pipe, class NP2 laid and jointed complete with collers 150mm bore of pipe
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down and hanging during point wiring of ceiling fan/exhaust fan of any size and sweep in proper manner and connecting up including provision of cable from ceiling rose or connector to fan all as per specified and directed by Engr-in-Charge
Dismantling unserviceable main switch/DBs with MCBs and wooden board including making good disturbed surface of wall.
Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.
M&L for Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface for One light point controlled by one, one way switch all as directed and specified. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.
All as per same item No. 111.00 Above but One ceiling /exhaust fan point controlled by one switch and regulator
All as per same item No. 111.00 Above but One 3 pin 5 amp socket out point on the same board with other switches.
All as per same item No. 111.00 Above but One3 pin 5 amps socket out let point on independent board
All as per same item No. 111.00 Above but One bell/buzzer point controlled by one bell push.
All as per same item No. 111.00 Above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.
S&F Switch piano flush type single pole one way 5 amps.
S&F Socket outlet 2 in 1, 3 pin, 6A
S&F Switch socket combination 2 in 1, 6A flush type
S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal
S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body
S&F Buzzer, Ding Dong AC. 230 volts, single pole
S&F Bell push, flush type, 5 amp.
S&F Electronic regulator 100/120 Watt step type
S&F Lamp holder insulated body with back plate for angle holder including 9W LED Lamp all as per specified.
S&F sheet metal enclosures with socket plug top and MCBs upto 20A, Double pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB
S&F LED lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
S & F 15 Watt LED streetlight fitting luminaire made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.
S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC CASING CAPING not less then 20mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 2.5 sqmm and one wire of 2.5 sqmm for earthing and one run of PVC casing/caping shall be measured as one unit.
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC casing capping not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 4 sqmm for earthing and one run of PVC casing capping shall be measured as one unit.
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC duct of size 45X25 MM (BXH), ISI (make-legrand) fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- (1) Two wires of 6 sqmm and one wire of 6 sqmm and one run of PVC duct of size 45X25 MM (BXH) shall be measured as one unit. (2) Cutting chases/Cutting of wall to through sub main from wall wooden panel and making good disturbed surface including painting and finishes to match with the adjoining surface shall be included in the unit rate. .
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC CASING CAPPING not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 6 sqmm and one run of PVC casing capping shall be measured as one unit.
S&F ceiling fans complete with blades, down rods, iron angel from ceiling to rubber real gatta, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Make- Havells/Crompton/Usha/Philips
Fabrication,supply & fixing of GI pipe bracket up to 40 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for 15 w LED security light fitting
S & F 4 way TP&N Vertical Loadline DBs in double door suitable for TP/FP MCCB with Range upto 160 A , breaking capacity : 10 kA / 16 kA / 25 kA , Bus Bars, Neutral Links, Blanking Plates without out MCCB, HSN Code - 8537, complete all as specified and directed by Engr-in-Charge,
S&F in repairs Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F MCB, single pole and neutral, 240 Volts , 40-63 Amps all as specified and as directed.
S&F MCB, single pole and neutral, 240 Volts , 6-40 Amps all as specified and as directed.
S&F MCB singal pole 240 Volts , 32 to 63 Amps all as specified and as directed.
S&F MCB singal pole 240 Volts , 6 to 32 Amps all as specified and as directed.
S & F in repair MCCB, 125 Amps , 415Volts, 16KA ,4 pole.
S&F sheet metal enclosures with socket plug top and MCBs upto 63A, triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB
M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mm dia by means of bolts ,nuts ,check nuts and washers including earthing pit , charcoal, common salt ,earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work of any type of soil/strata all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for foundation of poles, stay assembly and laying of LT/HT cable as in any type of soil and getting out, complete all as specified and directed.
Returning, filling, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete all as specified and directed.
Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point.
M&L for high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of size 80mm suitable for cable protection complete all including taking down or as specified and directed.
M&L for high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of size 32mm suitable for cable protection complete all including taking down or as specified and directed.
Supply laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 core complete all including taking down or as specified and directed.
S&F GI water tubing 50 mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all including taking down or as specified and as directed by Engr-in-Charge.
Supply laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core complete all including taking down or as specified and directed.
S&F GI water tubing 32 mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all including taking down or as specified and as directed by Engr-in-Charge.
Cutting of existing steel tubing for alteration or additions and insertion of Tee 25x25x20mm, union, socket all as specified and directed.
S&F Tubes, 'medium grade', galvanised, with all fitting; supplied and laid in trenches complete size 20mm.
S&F Gun metal globe, gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 20 mm.
M&L for construction of valve pit of size 30cmX30cmX60cm internal dimensions brick construction including all excavation and earth work in har/loose soil returning filling in disposal of surplus spoil to a distance not exceeding 50 m and depositing where directed PCC in foundation of the mix (1:4:8) type D2 (using 40 mm graded crushed aggregate) brick masonry in cement mortor (1:4) rendering 12 mm thick in cement mortor (1:4) internally finished even and fair and pointing flush externally as the work proceeding in the same mortor mild steel 50x6 mm frame MS sheet cover of 3.15 mm thick with handle and locking arrangment painting all the exposed MS work with two coat of synthetic enamel paint of the make as approved all the MS embedded in PCC with two caots of black bituminous paint complete all as specified and shown on drawing.
S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm- 690 gms) as floating valve for PVC tank.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I® of 1000 Ltr capacity.
NOTE :- AMOUNT OF SCHEDULE OF CREDIT RS. 56,706.40 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.
M/s. JBSR ENTERPRISES.
SVT ENGINEERS AND CONTRACTOR.
Alpha Construction
M/S SAMEER SUBHASH PATANI
Srujan Associates
Abhiraj Enterprises
K K CONSTRUCTION
Bidder Name
Vishal Constructions
M/S SAMEER SUBHASH PATANI
SVT ENGINEERS AND CONTRACTOR.
Alpha Construction
K K CONSTRUCTION
M/s. JBSR ENTERPRISES.
Srujan Associates
Abhiraj Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .