Refurbishment related to Civil works of common areas including internal furnishing works at BARC Hospital Anushaktinagar, Mumbai-400094.

Amount

Dismantling old plaster / skirting carefully, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead

Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below

Dismantling doors, windlows and clear storey windows (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area beyond 3.00 Sq.M

Dismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge

Lead charges for Lead of debris beyond 4 KM but upto & including 30 KM outside BARC / Anushaktinagar colony area by mechanical transport including loading, unloading, stacking / levelling etc. Note: The rates in respect of this item are applicable for NET Quantities arrived at after making deduction for voids @ 30% in respect of debris from corresponding STACK/TRUCK Measurement. Note: Finding authorised ground for disposing debries, trasporting of debries at disposal ground, disposing, stacking, leveling & statutery charges if any will be responsibility of the Contractor and no extra charges shall be paid for the same. The debris from identified area shall be cleared every week after accumulation of minimum one Track Load.

Debris Beyond 4 Km but up to and including 30 Km.

Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer) 5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) Note: Scaffolding will be paid seperately under relevant item

Providing, placing & installing of powder coated cold rolled steel, three seater lounge seating chair with seat, back and side frame welded together with proper armrest and leg support all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-01)

Providing, placing & installing of office desk of size 1650mmx900mmx728mm made with 18mm thick prelaminated Medium Density Fibre board, with 2mm thick PVC edge banding having finish of powder coated epoxy polyester with CPU hanger & locking arrangement for all cabinets all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-02)

Providing, placing & installing of office desk of size 1650x900x728 made with 18mm thick prelaminated board, with 2mm thick PVC edge banding having finish of powder coated epoxy polyester without CPU hanger & locking arrangement for all cabinets all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-03)

Providing, placing & installing of office desk of size 1500x750x728 made with 18mm thick prelaminated board, with 2mm thick PVC edge banding having finish of powder coated epoxy polyester without CPU hanger & locking arrangement for all cabinets all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-04)

Providing, placing & installing of console type full back ergonomic mesh visitor chair of high resilience polyurethane foam cushioning; with lumber support pad; powder coated tubular frame; with adjustable height, armrests and lumbar support for back all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-05)

Providing, placing & installing of modular type full height storage racks of 4 shelves with overall size of 900mm(W)x450mm(D)x1830mm(H) of 50 micron epoxy powder coated heavy quality Cold rolled closed annealed steel panels each shelf having capacity of min 80kg, knock down construction type all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-06)

Providing, placing & installing of locker modules of 4 nos in a single unit of size 450mm(W)x1950mm(H)x450mm(D) of knock down construction type, made of 50 micron epoxy powder coated steel panels, legs with screw type leveller for level adjustment, with cam lock arrangement all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-07)

Providing, fixing & installing of locker modules of 2 nos in a single unit of size 450mm(W)x1950mm(H)x450mm(D) of knock down construction type, made of 50 micron epoxy powder coated Cold Rolled closed annealed steel panels, legs with screw type leveller for level adjustment, with cam lock arrangement all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-08)

Providing, fixing & installing of 4 drawer filing cabinet of size 1320mm(H)x470mm(W)x620mm(D) to store files in vertical direction along slide; made of 50 micron epoxy powder coated Cold Rolled Closed Annealed steel panels; each drawer with capacity of storing 20mm thick, 28 no. of files in a hanging position on file hanger bar; with high quality full length slides having max 40kg capacity for 75,000 cycles; with provision for 1 point 10 lever cam locking mechanism all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-09)

Providing, fixing & installing of 4 drawer filing cabinet of size 1347.5mm(H)x900mm(W)x450mm(D) to store files in lateral direction; made of 50 micron epoxy powder coated Cold Rolled Closed Annealed steel panels; each drawer with provision to store files in a hanging position on hanger bar; with high qualtiy full length slides having min 45kg per 1m length capacity; with provision for 1 point 10 lever cam locking mechanism all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-10)

Providing and fixing bench made of seasoned teakwood frame attached to seating of 25mm thick PU slab-stock foam sticked onto 12mm plywood with leatherette upholstery with antirust oil painted steel frame all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-11)

Providing and fixing bench made of seasoned teakwood frame attached to seating of 25mm thick PU slab-stock foam sticked onto 12mm plywood with leatherette upholstery with antirust oil painted steel frame all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-11)

Providing, placing and installing of ergonomic visitor chair of injection molded plastic cushioning; PU foam back support; upholstery material as foam laminated fabric; powder coated tubular frame; with adjustable height, armrests all as directed by Engineer-in-charge. ( Refer Detailed Technical Specification No TS-13)

Providing and fixing 15-17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels

Extra for providing edge moulding to 15-17 mm thick marble stone / Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge.-Granite work

Providing and fixing hand rail using 304 grade Stainless Steel pipes & other SS sections of approved size and make and quality by welding, mirror / matt polishing, fixing at site etc. for balcony railing & staircases railing, grill, drain cover, counter, racks etc. including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for colour anodizing

Providng and fixing aluminium grill in natural Silver anodising of min 15 Microns with a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing and fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge .Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. "DECO GRILLE" make Model No. DG- 202 or equivalent make

Extra over for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge

Providing and fixing IS:12817 marked stainless steel butt hinges of size 100 x 60 x 2.5mm (heavy weight) of approved make with stainless steel screws etc. complete as directed by the Engineer-in-charge

Providing and fixing Approved Quality and shape LOCKS cum Handle of approved equivalent make for Sliding shutters. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Star Locks or equivalent make

Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 6.00 mm thickness

With tinted colour float glass panes of 6.00 mm thickness

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With frosted glass panes of 6.00 mm thickness

Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.

Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.

Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width

Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate

Supplying, providing and fixing STAINLESS STEEL-304 D-HANDLES (MATT FINISH) OF LENGTH - 300mm, DIAMETER-25mm, suitable S.S. fange , S.S. cap and thickness 16 Guage thickness to brick Walls, R.C.C. surface, Wooden doors etc. including drilling, S.S. Screws of 30mm long ( 6 Nos for each handle) ,cost of labour, tools, tackles ,wooden gutties, plants, transportaion, scaffolding etc. all complete as per site requirement and as directed by Engineer in charge.

Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick / Aluminium angle of required ISA Section , 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge- Second class teak wood

Providing and fixing WATER PROOF MARINE PLY of any approved brand as per IS 710: 2010. The rates are including the cost of screws, washers etc complete providing and fixing hard wood leaping around board in walls etc.

By using 12 mm thick water proof marine ply.

By using 19 mm thick water proof marine ply.

Providing and fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed by Engineer in Charge.

Providing and fixing decorative high pressure 1.5 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed by Engineer in Charge.

Providing and fixing decorative high pressure 1.0 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed by Engineer in Charge.

Extra for providing and fixing flush doors with decorative veneering in one side and commercial plywood finish in other side.

Providing and applying French spirit polishing for wooden sufaces with two coats on new works including a coat of wood filler to form a uniform neat finish as directed by the Engineer -in-charge and / or as per the specifications complete as directed by the Engieer-in-charge

Providing and painting with PU paint or polish on wood/metal/plastic surface as per manufacturer's instructions with thickness of 1mm achieved in two or three coats, matte or glossy finish including preparation of surface by removing all contaminants, sanding if necessary and making it even, for better adhesion & ensure thorough stirring to get consistent texture, evenly applied and properly cured complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing of required size of wooden moulded beading to using 2nd class teak wood to door and window frames with iron screws, plugs and priming coat on unexposed surface complete all as directed by Engineer-in-charge.

Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing , Wall painting with One coat on old work flat oil paint of approved make to give an even shade including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing and treating the OLD surface using ANTI-FUNGAL treatment in the following operations: (i) entire old paint to be scrapped out, (ii) The neeru / cement punning to be removed by chipping completely, (iii) one coat of Antifungal chemical having high degree of Santroprite (Sodium Chloro Penta Chlorophenate with diluant & additives) to be applied, (iv) entire surface to be finished with White cement based Wall putty of approved make to get uniform undulation free surface; complete as directed by the Engineer-in-charge. Note: 1. Old paint will be removed thoroughly either mechanically or by wire brush before application of primer and paint coats and cost of which shall be deemed to be included in the quoted rate. 2.Quoted rate for shall include for cost of covering existing material/furniture/equipments/devices with plastic sheet, removing the old paint by mechanical wall sander/scrubber machine, and cleaning the area as directed by the Engineer-in-Charge.

Providing and painting, finishing with antifungal paint of approved make with two coats over treated surface all as per manufacturer's specifications and as directed by the Engineer-in-charge Note: 1. Old paint will be removed thoroughly either mechanically or by wire brush before application of primer and paint coats and cost of which shall be deemed to be included in the quoted rate. 2. Quoted rate for shall include for cost of covering existing material/furniture/equipments/devices with plastic sheet, removing the old paint by mechanical wall sander/scrubber machine, and cleaning the area as directed by the Engineer-in-Charge )

CARRYING OUT MANUAL MISC. CARPENTRY / PLUMBING / CIVIL / MASONRY JOBS like minor repairs, fixing fitting and fixtures etc. as and when required and as directed by the Engineer-in-charge Note: 1. Labours shall bring necessary carpentary / plumbing tools, minimum materials such as washher, taflon tape, rawlpludge, screws, clips etc. 2) Payment shall be made as per the Log book duly approved by the Enginner in charge. 3) Contrator shall arrange necessary Police Verification Certificate for the workers engaged for thess work. 4) The contractor shall deploy one skilled, semiskilled or unskilled person for each job for 8 1/2 hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift whenever necessary as per the discretion of the Engineer-in-Charge during the contract period.

SKILLED CARPENTERY/PLUMBING/MASONRY JOB / WORKS with valid Police Verification Certificate for entire contract period.

SEMI-SKILLED CARPENTERY/PLUMBING/MASONRY JOB / WORKS with valid Police Verification Certificate for entire contract period.

UNSKILLED CARPENTERY/PLUMBING/MASONRY JOB / WORKS with valid Police Verification Certificate for entire contract period.

Supplying of approved quality Fevicol pack of 1kg as directed by EIC.

Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and painting walls with (Two coats) of approved shade elastomeric water proof exterior grade paint of approved make of required shade, minimium dry film thickness of 250 microns acheived in two or more coats / as per manudacturer's specifications including preparation of the surfaces by scrapping / wire brush, scaffolding complete. Primer coat will be with approved make with water in ratio of 1:2 and 2 coats of finishing coat without water all as directed by Engineer-in-charge.

Providing, fixing and installing at required location of wall mounted acrylic signage board of size 20"x30" UV printed of the required healthcare information all as directed by Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 25 mm and up to 40 mm

Grinding and polishing of Kota / mosaic / marble Tile flooring all as directed by Engineer-in-charge.

Renjin Construction (BID ID -3139468)