Recall Renovation of Park near House No. 1474 in K Block, Palam Vihar, Ward no. 3, Zone II , Gurugram

Amount

N S Item

Providing and laying grit wash conisting of 12mm coarse sand plaster and 5mm Narnaul/Dehradun etc. quarry mix with in 3 parts of cement 1 part of marble powder and 4:7 ration of cement marble powder and chips in white colour set to pattern as per design.

Supply and Laying Jointing and testing of G.I Pipe Class B

Gate Value 3/4'

R.H. pipe size 1"

Multi Play Spiral-N-Tunnel Station Covering Area: 30’L x 18’W It contains:FRP Spiral Slide 6mm thick inclined at 5’H – 1 noFRP Tube Slide inclined at 5’H – 1 noFRP Wave slide 6mm thick inclined at 5'H - 1 noFRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3’H – 1 noFRP Stair 3mm thick inclined at 3’H- 1 noFRP Platform Hex. Shape 5mm thick in 7’Dia – 2 no.FRP Canopy – 2 no. FRP Deer Figure on canopy – 2 no. FRP Fancy Railing Frog & Monkey Shape – 4 no. FRP Walking Bridge 7.5’ Long – 1 no. M.S Spring Climber – 1 no.M.S Zig-Zag Climber – 1 noM.S Chain Net Climber – 1 no M.S Climbing Ladder – 1 noM.S Station in which vertical m.s pipe is of 3” x12G of I.S.I Mark – 2 no Complete item with GST, Transportation,Installation with C.C & labour at site.

(i) 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade.(ii) 12 No. spndred and 6 no. FriezesFloral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel & frieze uniformly grinded spray primered, spray painted with P.U Paints.(iii ) 3 No. cast iron/frp base panel railing with frameFloral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing

Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame & vertical legs is of m.s pipe 2” x 12 gauge. It stays with m.s pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with m.s chain 6mm thick duly plated with ball bearing & m.s flat 6mm thick housing with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.(Including fixing at site and supervision & transportation & all type taxes)

Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of m.s pipe 1” x 12 gauge & m.s rectangular pipe 65 x 25 mm box X 16 gauge as climbing steps which support with 1”.25 sq. pipe x 14 Guage with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.(Including fixing at site and supervision & transportation & all type taxes)

Sea-Saw (4 seater): 8’ L x 5’.5 W x 15” high. Frame is of m.s pipe 2” x 12gauge. Sitting planks is of m.s pipe 2” x 12 gauge and its cantilever & handles is of m.s pipe ¾” x 12 Guage .Sitting seats-4nos is of molded FRP material in 3mm thick with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.(Including fixing at site and supervision & transportation & all type taxes)

Arm and ShoulderWheel:-Providing, and fixing Arm and Shoulder Wheel of size 130X '1200 X 1350 mm make of Green Gym or Equivaletfabricated with main post of 140 mm dia and 3.0 mm thicrest of the pipes are 40mm dia and 2.5 mm thick all pipcmade up of hot roiled tubular steel and hot dippegalvanized, and powder coated using Akzo Nobel cequivalent of 80-120 micron thick. All welding joints of pipare robotic welded with joints scalloped as necessary andressed off removing sharp edges and burrs. Zinc primepaint to be applied at all welding points prior to finishinkPadals shall be made up of Nylon alloy with rounded edgof prevent any impact of injury and seat to be made frorvirgin LLDPE manufactured by rotational moulding witminimum thickness of plastic 4.00mm, colourful andresistant environmental friendly. Bearing used shall bmaintenance fire, duly oiled sealed and self lubricated madbY reputed company to be approved by Officer -in-ChargeEquipment to be fitted within built limiters to prevenunwanted movements. All open ends of pipe to be colourelby GI/LLDPE caps for user safety. The equipment to bfixed on ground with concrete of minimum strength M2:nd J shaped welded bolts and once the concrete is set, ft;he equipment on to it and cover nuts and bolts with the basMate cover, all complete as per direction and approval

Double Cross Walker/ Cross trainer double:-Providing, and fixing Double Cross Walker of size 1600 X600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is

Pull Chair:-Providing, and fixing of Pull pair of size 2500 X 800 X2000 mm make of Green Gym or Equivalent fabricated withmain post of 140 mm dia and 3.0 mm thick rest of the pipesare 40mm dia and 3.0 mm thick all pipes made up of hotroiled tubular steel and hot dipped galvanized, and powdercoated using Akzo Nobel or equivalent of 80-120 micronthick. All welding joints of pipe are robotic welded withjoints scalloped as necessary and dressed off removing sharpedges and burrs. Zinc .primer paint to be applied at allwelding points prior to finishing. Pedals shall be made upof Nylon alloy with rounded edge of prevent any impact ofinjury and seat to be' made from virgin LLDPEmanufactured by rotational moulding with minimumthickness of plastic 4.00mm, colourful and U V resistantenvironmental friendly. Bearing used shall be maintenancefree, duly oiled sealed and self lubricated made by reputedcompany to be approved by Officer-in-Charge. Equipment tobe fitted within built limiters to prevent unwantedmovements. All open ends of pipe to be coloured byGULLDPE caps for user safety. The equipment to be fixedon ground with concrete of minimum strength M25 and Jshaped welded bolts and once the concrete is set, fix

Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is

Arm Wheel/ Shoulder Wheel:- Providing, and fixing Arm Wheel in a pair of size 850 X800 X 1800 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resi3tant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix

Knee HIP Raise:- Providing, and fixing Knee Hip Raise of size 1105 X 550 X 11480 mm make of Green Gym or Equivalent fabricated with main post of 140 rum din and 3.0 mm thick rest or the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Mao Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior tofinishing. PadaIs shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U Vresistant environmental friendly. Bearing used shall bemaintenance free, duly oiled sealed and self lubricated made byreputed company to be approved by Officer-in-Charge.Equipment to be fitted within built limiters to prevent unwantedmovements. All open ends of pipe to be coloured by GI/LLDPEcaps for user safety. The equipment to be fixed on ground with

Twister:-Providing, and fixing Twister of size 1700 X 1300 X 1300 mmmake of Green Gym or Equivalent fabricated with main post of140 mm dia and 3.0 mm thick rest of the pipes are 40mm diaand 2.5 mm thick all pipes made up of hot rolled tubular steeland hot dipped galvanized, and powder coated using AkzoNobel or equivalent of 80-120 micron thick. All welding jointsof pipe are robotic welded with joints scalloped as necessaryand dressed off removing sharp edges and burrs. Zinc primerpaint to be applied at all welding points prior to finishing.Padals shall be made up of Nylon alloy with rounded edge ofprevent any impact of injury and seat to be made from virginLLDPE manufactured by rotational moulding with minimumthickness of plastic 4.00mm, colourful and U V resistantenvironmental friendly. Bearing used shall be maintenancefree, duly oiled sealed and self lubricated made by reputedcompany to be approved by Officer-in-Charge. Equipment to befitted within built limiters to prevent unwanted movements. Allopen ends of pipe to be coloured by GI/LLDPE caps for usersafety. The equipment to be fixed on ground with

Victorial Steel sitting bench of size 61"(L)x29½” (H)x 18½” (D). Seat with 5 steel pipe and back with five steel pipe of size 47mmx23mm rectangular of 16 gauge ISI mark e.r.w. spl. Pipe fixed with C.I. frame on both sides with durable nut bolts duly welded to protect it unscrew. All duly anti rusting Red Oxide primered before P.U. bus green spray paint coating long lasting. (Including all taxes)

Providing and fixing mono block motor 1HP and make Texmo complete in all respect

Pre cast Concrete Benches 2 Nos. L shape base support in grey cement thickness 100 mm Back height 1000mm front 450mm size 1500x100mm x50mm Size of plane sealing length 1500mm sealing height 450mm. Total height=1000mm

Plantation complete at site( in position loading & unloading supply) Legestromia indica in 13"x13" poly bag, well grown

Dwarf cana multicolour ht.1' well grown

Hamelia Patens 2'ht cement Bag well grown

Hibiscus 2'-3'ht green cement bag well grown

Harsingar 5'-6' ht well grown

Plumeria Alba 5'-6' ht well grown

Boganvillia cement bag well grown

Dwarf caner polybag well grown

Chandini verigated in cement bag well grown

phoenix palm stem 3' ht. well grown

Exora 1/2ht well grown

Tecoma godichodi 3'ht 13''x13'' polybag well grown

Euphorbia milli well grown

Jetropha 3'ht 13''x13'' well grown

Calendera 3'ht well grown

Tecoma capensis 1 1/2-2'ht polybag well grown

Bismarkia 5'ht 21''x21" polybag well grown

Bottle palm with clear stem 3', ht. 7'-8'

Bidder Name

Amount

M.K CONSTRUCTIONS(GSTN-06ABMPY0992J1ZX)

McCROMIK IND.(GSTN-NA)

Ravinder sharma(GSTN-NA)

M/s Lakshay and Company(GSTN-NA)

Ravinder sharma

M/s Lakshay and Company

McCROMIK IND.

M/s Lakshay and Company

Ravinder sharma

M.K CONSTRUCTIONS