Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.1 LAccepted-AOC 20 1 CHANDRA NIVAS APPLEBY ROAD WELLINGTON COONOOR NILGIRIS 643 232 | COONOOR | NILGIRIS | TAMIL NADU | 643232 | L1 | Accepted-AOC BEING L1 BIDDER | |
| 2 | L2₹26.3 L+₹4,390 (0.17%)Rejected-Finance 30 H SELBOURNE ROAD NEAR S M HOSPITAL UDHAGAMANDALAM THE NILGIRIS TAMIL NADU 643 001 | UDHAGAMANDALAM | THE NILGIRIS | TAMIL NADU | 643001 | L2 | Rejected-Finance BEING NOT L1 BIDDER | |
| 3 | L3₹28.6 L+₹2.3 L (8.93%)Rejected-Finance DOOR NO 6 106 GORKHA CAMP WELLINGTON BARRACKS POST THE NILGIRIS 643231 | THE NILGIRIS | TAMIL NADU | 643231 | L3 | Rejected-Finance BEING NOT L1 BIDDER |
Tender Value
₹27.4 L
EMD Value
₹54,800
Closing Date
2 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DSSC WELLINGTON
BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
UPGRADTION OF DS ROOMS IN JAWAHAR BLOCK AT DSSC WELLINGTON
2023_MES_626820_1
8382/E8
Open Tender
Civil Works
Item Rate
120 days
WELLINGTON
PLEASE REFER TENDER DOCUMENTS AND NIT
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹54,800
Yes
2 Jan 2024
4 Nov 2023
4 Dec 2023
4 Nov 2023
2 Dec 2023
18 Nov 2023
Amount
Dismantling of floor hearth or wall tiling including cement mortor bedding(but not backing) complete all as specified and as directed.
Demolition of cement concrete (unreinforced ) of any description and in any postion not otherwise spcifically provided etc (below or above ground level) as in roof pad /floors etc and removing debris off the site complete all as spcified and as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and directed.
Cutting into old masonry to form toothings for and bonding in new brick or stone work including making good in cement mortar
Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m all spd and directed.
Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.
Material and labour for UPVC door with shutters of any colourThe construction profile shall be overall frame sectional size 60x 58mm with wall thickness 2.70+/- 0.2mm extruded sections.The corners shall be plastic welded.The hinge side vertical outer frame shall be reiforced with galvanised steel profileof wall using 8mm dia 80mm long MS screws minimum 3 Nos on each side.The glazing shall be fixed tyo door frame with UPVC standared beading s of sectional size 24.05x16mm & 2mm thick.The bottom portion of door shutter shall be providfed with UPVC board 5mm thick & 1Mtr in height and the balance shall be glazed excluding the shutter frame area.Thge shutter shall be fixed to frame using 3Nos of 3D hinges.The door shutter shall be provided with 12mm thick sheet glass & 5mm UPVC board with EPDM rubber gasket,one mortice lock with powder coated handles and two numbers powder coated MS tower bolts complete all as specified and as directed.The cost of glass, sheet etc shall be deepmed with the quoted rate. Make : Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta/strix.
Material and labour for Factory made UPVC white/ coloured sliding Windows with glazing all as per manufacturer's direction and following specifications :- (i) The profile for constr of UPVC window frame shall be uPVC material conforming to 10151 . (ii) The frame shall be made of extruded uPVC section having overall diamension of 65mmx 50mm having wall thikness 2mm ± 0.2mm. (iii) The corners of wall frame shall be joint by MS galavanised brackets ,joints,mittred and plastyic weleded. (iv) The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thicknesss 1mm ± 0.1mm and the tie rod shall be provided at the bottom of thge frame. (v) The profiles should be sigle chamber system which shall provide high insulation properties. (vi) The window system should be glazed with 6mm thick plain glass fixed in window frame as per manufactures instruction. Make : Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta/strix. Note: The entire fixing shall be done with as per manufacturer's instructions and specification and as directed by the Engr In Charge.
M&L for UPVC fixed ventelators of approved colour with glazing all as per manufactures direction and following sections:- (1) UPVC ventelator frame shall be made of UPVC material confirming to IS-10151 .The ventelator frame shall be nade of extruded UPVC section having overall dimension of 60mm x60mm having wall thickness 2 mm +/- 0.1mm.Corners of wall frame shall be jointed by MS galvanised brackets joints mitred and plastic welded.The hinge side vertical outer frame shall be reifnforced with galvanised MS tube of wall thickness 1mm +/- 0,1mm and the tie rod shall be provided at the bottom of the frame . (2) Glasing shall be provide with 5mm thick frosted glass fixed with appropriate size beading as per manufactures specification. Make : Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta/strix.
Refixing UPVC window of any pattern or any size and refix the door with frame at the opening where directed inlcuding repalace/repir of any acessories like stopper,towerbolt,handle etc includiong making good the surface complete all as direted by the Engr In Charge.
M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surface even and fair to receive the floor finish complete all as directed.
M&L for vitrified double charged /Ultracharged jointless tiles 9-10mm thiock light/dark colour (Square/rectangulart) area of each tile exc 0.36 Sqm but n.exc 1.00 Sqm as in floor etc set and jointed in neat cement slurry and pointing in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 complete all as directed and specified.
S&F 9/10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixedwith hidden screws to Steel/ Aluminium/Wooded frame work complete all as specified and as directed. Note:The cost of frame work is deemed to be included in the quoted rates. Make : Somany/Khajaria/Rak Ceramics
Material and labour for Rendering in Cement Mortar ( 1:6) 20mm thick on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed..
M&L for Granite 18-20mm (Jet black pattern) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L for Rounding to edges of stone slabs/ganite slab one edge, such as in steps, cooking platform,sill etc and other similar situation
Material and labour for Aluminium designer powder coated decorative curtain rods antique finish 25mm dia dia, exterior grade 3mm thick with and including side caps, holding clamps and 'F' and 'L' brackets, fixed to wall with PVC rawl plug and brass screws etc., complete all as specified and as directed.
M&L for Providing Gypsum board False ceiling using 12mm thick Gypsum board panels of size as approved by GE, fixed with staples on powder coated standard galvanized iron snap grid frame work of size suitable to fixing Gypsum board using 'T' and angle sections made out of 0.5mm thick PGI sheet, grade of zinc coating 220, bent to shape required as in main member, secondary member, perimeter angle section including provn of G I channel suspender fixed to roof members at the rate of 1200mm c/c and interspaced at 610mm c/c, the main fixing channel shall be fixed through fasteners clips as per manufacturer's instructions with and including plaster of Paris decorative type cornice all around at the junction of wall and ceiling and applying 3 mm thick wall care putty and applying two coat of ASIAN PAINT ROYAL ASPIRA with one coat of primer complete all as specified and as directed.
M & L for complete removal of existing treatment from old plastered surfaces of celing and applying two coats of Asian paints Royal ASPIRA paint (approved colour) over a coat of deco prime primer over and including one coats of wall care putty with brush/roller, finished even and smooth complete all as per manufacturer's instruction and as directed by GE.
M & L for complete removal of existing treatment from old plastered surfaces of new/old plastered surface of walls and applying two coats of Asian paints Royal ASPIRA paint (approved colour) over a coat of deco prime primer over and including one coats of wall care putty with brush/roller, finished even and smooth complete all as per manufacturer's instruction and as directed by GE.
M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165
M&L for preparing new surface of steel and appling two coats of synthetic enamel paint over a coat of primer red oxide
Supply and fix in repairs 18mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., including dismantling of existing any type of board and complete all as specified and as directed. Note: All exposed edges/surfaces to be finished with same laminated sheet to match with the other surfaces and nothing will be paid extra.
Supply and fix in repairs Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH
Supply and fix in repairs Gun metal handle of size 150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH
Supply and fix in repairs Magnetic closer of suitable size for cupboards fixed with screws complete all as specified and directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH
Material and labour for providing cement concrete type B-0, 1:2:4 (12.5mm graded agregate) avg 40mm thick in floors,roofs etc (for roof padding) finished even and fair all as specified and as directed.
Rendering 10mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry (or) Equivalent as per manufactures instruction on roofcslab/ floor complete all as specified (liquid water proofing compound are measure seperately)
M&L for laying 3mm thick APP modified water proofing membrane weighing not less than 3.6 Kg/Sqm, reinforced with non woven polyster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300 N/Sqm, side lap & end lap 15cm over a coat of bitumen primer @ 0.20 Kg/Sqm and finished with aluminum paint @ 0.10 Ltr/Sqm all as per manufactures instruction and as directed by Engr-in charge. Note : The work shall be carried out by authorised applicators of manufacturers.
Material and labour for complete removal of existing finish of plastered surface of wall or floor area and removing all oil.wax,dirt or any other foreign materials including cleaning the surface with wire brush and the surface cleaned with pressure water etc and apply two coat of FOSROC NITOCOTE CM 210 @ 3.6Kg/Sqm with using trawler/roller appication etc all as per manufacturer's instruction complete.
Supply and fix prefabricated PVC /UPVC single seater rectangular cluster (Work station) of approved colour pattern with 3 Nos movable drawers including necessary drilling,bolting etc fixed on existing floor finish complete.The detailed specification of the cluster shall be as follows. (a) The thickness of the main frame of the cluster shall be 50mm(+/- 5mm) . (b) The thickness of side partition shall be 23mm(+/- 2mm) . (c) thickess of the table top shall be 25mm(+/-5mm). (d) The overall size of the cluster shall be 1050mmx600mmx1200mm. (e) Tha veritcal and horizondal frame shalle be aluminium powder coated frame of size 60mm x60mm.
Supply fixing modern and contemporary office rotationable heavy dury chair fixed with follwing specification :- (a) Heavy duty roller on leg and with cators, chair base, gas lifter, chair arm, chair control, press wood sheet, plastic outer cover, HR form, upholstery leatherette with dimensions of 670 mm x 1100 mm the finish of the chair shall be leatherite and mesh fabric. (b) Executive low back with artificial leatherette, with corme finish and mesh fabric. (c) The chair shall be with comfortable arm rest and lumbar support, solid base with casters, HR form sheet, high quality upholstery leatherette. (d) The height of chair shall be adjustable gas lft. (e) Make Damro modal No : Ocm 039 or techno commercially equivalent as approved by GE
Material and labour for one coat of chalk white primer on new plastered surface including preperation of the surface all as specified and as directed.
M&L for Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete as specified and as directed.
M&L for use & waste of steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. to flat rough finished surfaces of concrete square or rectangle complete as specified and as directed.
S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and as directed.
Description all as item No 37 above but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks exc 10cm width and setting in mortar(1:6) complete as specified and as directed.
Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. Note: Taking down of Old existing Surface mounting 2*2 LED light fittings from site and refixing of same fitting at another place including necessary electrical connection is deemed to be included in the unit quoted rates.
Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge.
Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed by Engr-in-Charge.
NOTE for Item Nos 40 to 42 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.
M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for(a) One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps. Make of cable : Havells/Polycab/Finolex.Make of conduit-Precision/Modi/finolex
Description all as per Sl Item No.43 herein before, but One switch socket outlet point 5/6 Amps on independent board.
Description all as per Item No.43 herein before, but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete.
NOTE for Item Nos 43 to 45 : 1) Modular metal flush boxes shall be measured & paid separately. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.
M & L for surface sub-main wiring alongwith earth wire of size (2 x 1.50) sq. mm + (1 x 1.50) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Modi/finolex.
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 2.50) sq. mm + (1 x 2.50) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Modi/finolex.
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 6.00) sq. mm + (1 x 6.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Modi/finolex NOTE for Item No. 46 to 48 : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.
M & L for Surface 3-Phase sub-main wiring alongwith earth wire of size (4 x 10.00) sq. mm + (1 x 10.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Modi/finolex NOTE : 1) Four runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.
S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular switch with indicator, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXIW161, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S&F internet socket RJ-45, suitable for CAT 6 cable ,sheilded, folded metal 1 module all as directed.Cat No:ACVKJWW451 Model - Verona of CRABTREE (Havells) or techno-commercially equiv in Legrand/Anchor Roma
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply, Fixing modular plastic flush box 1/2 module suitable for fixing switches/sockets all as directed.Cat No : ACNXMIZX01 Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing modular PVC Surface box suitable for fixing switches/sockets of 6 modules all as directed. Cat No : ACNXMIZX06 Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 8 modules all as directed. Cat No : ACTXMIIX08, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 6 modules all as directed. Cat No : ACVPPCWV06, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 8 modules all as directed. Cat No : ACVPPCWV08, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor
NOTE for Item Nos 50 to 63 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.
S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/CG/Anchor
S&F ultra modern, recess mounting,40W,5700K, CRI >= 80, CT >= 5700 K, size of 600 x 600 mm (approx dimensions), suitable for gypsum false ceiling, with high efficiency electronic driver, surge suppressor of 2 KV or more & high brightness LEDs, luminaire efficacy > 95 lumens/Watt, power factor >= 0.90, operating range – 140 to 270 V, 50 Hz with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge. Make: Luker cat No: LPS40 or techno-commercially equiv in Jaguar/Philips.
S&F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make :Havells, Cat No:ENDURALINEARNEOBS20WLED865SPCSS or techno-commercially equiv In Jaguar/Philips
S & F wall mounting decorative Picture light of rating 12W, 5700K white with aluminum die cast body and PC diffuser with all fixing arrangement complete all as specified and as directed. Make: Luker, Cat No : LMCL 12 or techno-commercially equivalent in Philips/Havells.
S & F ceiling/wall/panel mounted LED TRACKLIGHT (WHITE COLOUR) 18 W or next higher rating suitable for Track Channel 1/2 Mtrs span, CRI > 80, CT=6500 K ,twin/three core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed. Make: Cat No LSPT18 of Luker or techno-commercially equivalent in Philips/Havells Note: Track channel of 1 Mtrs shall be measured & paid separately under relevant items.
S & F ceiling/wall/panel mounted LED TRACK CHANNEL (WHITE COLOUR) 1 Mtrs length suitable for mounting of 03 Nos Tracklights 12 W, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LTM1 or techno-commercially equivalent in Philips/Havells. Note: Track Lights 18 W shall be measured & paid separately under relevant items.
Imp Note for Item Nos 65 to 69:: 1) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.
S & F and concealing of SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge. Make: L&T, Cat No: DBSPN012DD or techno-commercially equiv in Legrand/Siemens
Supply and Fixing Miniature circuit Breakers, SP&N, 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA ISI marked complete all as specified and as directed by Engr-in-charge Make: L&T Cat No: AU10S20(06-32)3C- or techno-commercially equiv in ABB/Legrand
Supply and Fixing Miniature circuit Breakers, SP&N, 240 Volts of capacity 40 Amps with breaking capacity 10 KA ISI marked complete all as specified and as directed by Engr-in-charge Make: L&T Cat No: AU10S20403C- or techno-commercially equiv in ABB/Legrand
Supply and Fixing Miniature circuit Breakers, SP, 240 Volts of capacity 40 Amps with breaking capacity 10 KA ISI marked complete all as specified and as directed by Engr-in-charge Make: L&T Cat No: AU10S10403C- or techno-commercially equiv in ABB/Legrand
Supply and Fixing Miniature circuit Breakers, C Series, single pole, 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA ISI marked complete all as specified and as directed by Engr-in-charge Make: L&T Cat No: AU10S10(06-32)3C- or techno-commercially equiv in ABB/Legrand
S & F and concealing of MCB, DB, TPN, 12 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN012DD or techno-commercially equivalent in Legrand/ABB
S & F and concealing of MCB, DB, TPN, 06 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN006DD or techno-commercially equivalent in Legrand/ABB
S&F and concealing Manual Changeover 160 Amp capacity of frame size 2,with sheet steel enclosure with operating handle suitable for horizontal as well as vertical mounting,inbuilt two changeover auxiliary contact, confirming to IEC 60947-3, IS/IEC60947-3 , flushing to wall and making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and directed by Engr-in-Charge. Make: L&T, Cat No: CO21600OSOO or techno-commercially equiv in Legrand/ Havells.
S&F MCCB, 4 pole,(125-160)A )rating (Ics = 100% Icu),415Volts,25 KA Breaking capacity,with adjustable thermal and fixed magnetic setting and making cut in existing panel for fixing of MCCB complete all as directed by the Engr-in-Charge. Make: L&T, Cat No CM90642OOMO or techno-commercially equiv in Legrand/ABB.
S & F and concealing Sheet metal enclosure , IP-30. IK-08 where MCCBs to be used, 4 Pole, 415 Volt, Single Door with Suitable louvers for heat dissipation and inbuilt neutral link for TPN sustem ISI marked complete all as specified and as directed by Engr-in-charge. Make : L&T, Cat No CM91003OOOO or techno-commercially equiv in Legrand/Havells.
S & F MCB, TP, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed by Engr-in-charge. Make : L & T, Cat No : AU10S30633C or techno-commercially equivalent in Legrand/ABB.
S & F MCB, TPN, 10KA, 415V, "C" curve, (63-80) A, ISI marked complete all as specified and as directed by Engr-in-charge. Make : L & T, Cat No : AU10S40(63-80)3C or techno-commercially equivalent in Legrand/ABB
S & F MCB, TPN, 10KA, 415V, "C" curve, (100 -125)A, ISI marked complete all as specified and as directed by Engr-in-charge. Make : L & T, Cat No : AU15S4(100-125)3C or techno-commercially equivalent in Legrand/ABB
M&L for concealing of rigid non-metallic PVC conduits of external dia 25 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends for fixing complete all as specified and directed. Make:Precision/Finolex/Modi. Note: the chases cutting to wall/Surface and making good the disturbed surfaces is deemed to be included in quoted rate .
KGP BUILDERS
CRD TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .