Carrying out Civil repair Works for Narthanashala and Natyashala in HAL Township

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all as specified and directed by EIC.

Removing old damaged asbestos cement corrugated sheets of any size fixed with J-bolts / screws at all heights and handing over the useful materials to stores with rate including hire charges for labour,tools,etc all as specified and directed by EIC.

Demolishing the existing cement plastered brick masonry made in Cement mortar of any thickness including stacking serviceable materials and disposable of unserviceable materials within 50 metres lead with rate including hire charges for labour,tools,etc all as specified and directed by EIC.

Removing old wooden door / window shutters / ventilators of size 3.0sqm below from plastered brick wall including frames, MS grills,holdfasts,etc and stacking serviceable materials within 50 metres lead with rate including hire charges for labour,tools,etc all as specified and directed by EIC.

Carefully detaching old damaged wood work in purlins and rafters upto 10.00 m span and 5.0m height including stacking the material within 50.0 m lead with rate including hire charges for labour,tools,etc all as specified and directed by EIC.

Dismantling old damaged plaster including raking out joints in cement mortar and cleaning / preparing the surface for re-plastering including disposal of rubbish within 50.00 metres lead with rate including hire charges for labour,tools,etc all as specified and directed by EIC.

Providing and constructing Random Rubble masonry with hard stone in foundation with cement mortar 1:6 for walls for all thickness in standard bonds including cost of all materials,labour,taxes, curing etc., complete as specified and directed by EIC.

Providing seond class teak wood for beams / purlins / rafters of desired sizes including hoisting,fixing in position and apply wood preservative for the unexposed surfaces,etc with rate including cost of all materials,labour,taxes, curing etc., complete as specified and directed by EIC. ( Measurement shall be taken after the members are fixed in position)

Supplying and Fabricating TMT (Fe 500 grade) reinforcement bars of all diameter, conforming to IS, for restructuring of cracked walls including cutting, bending wherever required and placing in position with approved adhesive of FOSROC or equivalent make at all levels and position complete with rates including cost of all material, labour, wastages, transportation charges etc., all as directed and approved by EIC.

Plastering in patches not exceeding 2.50sqm area for external brickwalls / concrete surfaces with C.M 1:4, of thickness 12mm to 20 mm using fine river sand, trowelled to even and smooth finish including disposal of debris,cost of all materials, labour, curing, scaffolding,etc. at all heights all as specified and directed by EIC.Contractor should ensure all safety measures at his own cost if work is carried out at heights.

Supplying, fabricating by welding and erecting M.S rolled structural members like I-Beams,channels , angles M.S pipes, MS square pipes, chequered plate,square rods,etc of TATA, SAIL, RINL make conforming to IS specification including lifting,hoisting,fixing in position by welding at site,bolting and applying two coats of Synthetic enamel paint over a coat of Zinc Chromate primer of ASIAN paints, ICI, BERGER or equivalent make all as specified and directed by EIC.The relevant code of procedure for rolled steel section dimensions, welding ,erection and hoisting and tolerances allowed shall be complied.

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by EIC)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 Mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by EIC. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone ggregate 20 mm nominal size derived from natural sources) all as specified and directed by EIC.

Providing and constructing brick work with best locally available flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in CM 1:6 for walls for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, including cost of all materials,labour,taxes, curing etc., complete as specified and directed by EIC.

Plastering internal / external brickwalls / concrete surfaces with C.M 1:6, 20 mm thick trowelled to even and smooth finish including cost of all materials, labour, curing, scaffolding,etc. at heights with rate including cost of all materials,labour,curing,transportation,other incidental charges,etc all as specified and directed by EIC.

Supplying and fixing Vitrified tiles for flooring / skirting ( HD Polished Digital type) of (KAJARIA / NITCO / JOHNSON / SOMANY) make of size 600 X 600 mm, 10mm thick and 3mm wide spacer joints for floors of approved design and pattern fixed over CM 1:6, 20 mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3 kg/sq.m or using tile adhesive of 5mm average thickness of VX1 KAJARIA or MYK LATECRETE make and jointed with approved joint filler of matching colour / shade etc. complete, with rates including hacking the mosaic / Concrete floor surface, cost of all materials, labour charges, tools, lifts, leads, transportation,etc., all as approved, specified and directed by EIC.

Providing and fixing in position (at any ht.& level) two track glazed, Aluminium powder coated sliding windows with sections conforming to JINDAL catalogue including providing & fixing 4.00mm thick plain float glass of MODI / SAINT GOBAIN make with approved quality rubber / nylon gaskets, providing and fixing standard Aluminium handles with locking arrangement, necessary wheel / rollers etc.,. The windows shall be fabricated with Aluminium extrusions as described below of series B: a) Bottom member two track section 61.85 x 31.75 x 1.20 mm. b) Top & sides of two track section 61.85 x 31.75 x 1.30mm. c) Shutter top & bottom 40 x 18 x 1.29mm d) Shutter interlock 40x27x 1.29mm e) Shutter handle side 40 x 18 x 1.29mm complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC. [Gaps between wall / beam and Aluminiumframes shall be filled with silicon and made good].

Providing and fixing ISI marked 30mm thick flush door shutter (Greenply / Kitply / Centuryply make) single or double leaf, solid core (with block board) confirming to IS 2202 (Part 1) etc with rate including wastage,cost of all materials, labour charges for fixing, hire charges for tools,consumables like screws, transportation,etc all as specified and directed by EIC.

Providing & fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S of GREEN LAM / DECOLITE / ROYALE' TOUCHE' make including cost of adhesive of approved quality with rate including cost of all materials,, head less nails, Abro masking tape,wastage,labour,transportation,etc all as specified and directed by EIC.

Supplying & fixing 250 x 10mm bright finished brass tower bolts of barrel type of approved make and quality for door shutters using necessary screws with rate including cost of all material, tools, labour,etc., specified and directed by EIC.

Supplying & fixing 125 x 85x 5.5mm (Heavy type) bright finished brass butt hinges of approved quality and make for door shutters using necessary screws etc., with rate including cost of all material, tools, labour, wastages,etc., specified and directed by EIC.

Supplying & fixing 300 x 16 x 5mm bright finished brass door latch / aldrop of approved quality and make for door shutters using necessary screws etc., with rate including cost of all material, tools, labour, wastages,etc., all as directed and approved by EIC.

Removing old distemper paint from walls/ceilings, beams, columns etc. including cornices, pilasters by sand papering, dusting, brooming, scrapping, washing, rubbing down wherever necessary and Supplying & applying Two coats of Acryllic Emulsion paint of interior grade (ready mixed) having VOC content less than 50 gms/litre and also supplying over a coat of whte cement based putty of average thickness 1mm and applying one coat of water thinnable cement primer on having VOC content less than 50 grams/litre of Asian Paints or equivalent product in Berger make of approved shade with rate including cost of all materials, labour,tools, scaffolding, wastage, etc complete all as approved, specified and directed by EIC.Contractor should ensure all safety measures if work is carried out at heights at his own cost.(Co-efficient / multiplication factor shall be applied as per DSR 2023)

Providing, fabricating and fixing Powder coated Aluminum ventilators of minimum size 0.45mx 0.3m with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ eoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : including cost of material,labour,conveyance etc as directed by EIC.

Disposal of building rubbish / malba / similar unserviceable, dismantled material like structural steel or waste materials by mechanical means, including loading,transporting, unloading to specified location,beyond 50 m initial lead, for all leads (within HAL premises) including lifts involved,vehicle,labour,fuel charges,driver etc complete all as specified and as directed by EIC.

HAL/HD/CE/T/24-25/26

HAL/HD/CE/T/24-25/26

Civil repair Works for Narthanashala/Natyashala in HAL Township

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II