Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.9 LAccepted-AOC RZ F 905 8 RAJ NAGAR II PALAM COLONY NEW DELHI SOUTH WEST DELHI 110077 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110077 | L1 | Accepted-AOC AOC | |
| 2 | L2₹34.9 L+₹5.1 L (17.0%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹35.6 L+₹5.8 L (19.5%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹35.7 L+₹5.9 L (19.7%)Rejected-Finance 1 9820 GALI NO 01 WEST GORAKH PARK SHAHDARA DELHI 110032 | SHAHDARA | DELHI | 110032 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹36.0 L+₹6.2 L (20.7%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | M/S CHANDER SHEKHAR L3 | NAVEEN TRADERS L4 | M/S Parshant Associates L6 | SMS Enterprises L2 | SHRI GAJANAND ENTERPRISES L1 | M/S NEHAL ENTERPRISES L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220) | |||||||||
| 1.01 | S&F 12mm thick plywood commercial type BWR grade size 1980mm x 900mm x 12mm thick (in one piece only) as top of the charpoy GI Pipe with mild steel Screw bolt (Machine made) of size 40mm long, 6mm thick with hexagonal or square head at one end and screw the other, including removal of old unserviceable ply top.complete all as per specified and directed. | 1,880 | Each | 1,199 ₹22,54,120 | 1,225 ₹23,03,000 | 1,100 ₹20,68,000 | 1,400 ₹26,32,000 | 1,099 ₹20,66,120 Lowest | 1,100 ₹20,68,000 |
| 1.02 | M&L dismantling of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32mm size bore duly ISI marked including threading at both ends complete all as specified and directed. | 200 | Each | 440 ₹88,000 | 200 ₹40,000 | 600 ₹1,20,000 | 290 ₹58,000 | 190 ₹38,000 Lowest | 499 ₹99,800 |
| 1.03 | M&L dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Srl No 1.02 to the required size for short rail including threading at both ends complete all as specified and directed . | 400 | Each | 25 ₹10,000 | 20 ₹8,000 | 40 ₹16,000 | 18 ₹7,200 | 10 ₹4,000 Lowest | 20 ₹8,000 |
| 1.04 | Removing of old unserviceabe legs of charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 1.03 above by cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed. | 800 | Each | 35 ₹28,000 | 20 ₹16,000 | 40 ₹32,000 | 18 ₹14,400 | 10 ₹8,000 Lowest | 20 ₹16,000 |
| 1.05 | Supply and fixing MS Iron strips 08 Nos of size 50mm x 6mm, 75mm long duly holed/drilled and welded to rails of charpoys each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as directed. Note : One number of MS flat iron strip 50mm x 6mm x 75mm long is measured as one unit. | 15,040 | Each | 25 ₹3,76,000 | 20 ₹3,00,800 | 200 ₹30,08,000 | 6 ₹90,240 Lowest | 10 ₹1,50,400 | 50 ₹7,52,000 |
| 1.06 | S&F flat MS iron 02 Nos of size 50mm x 6mm thick, 900mm long providing 02 Nos of holes / drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts & bolts with washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as directed.
Note : One number of MS flat iron strip 50mm x 6mm x 900mm long is measured as one unit. | 3,760 | Each | 109 ₹4,09,840 | 120 ₹4,51,200 | 150 ₹5,64,000 | 48 ₹1,80,480 | 70 ₹2,63,200 | 25 ₹94,000 Lowest |
| 1.07 | M&L dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI Pipe med grade 32mm bore pipe complete all as specified and directed . | 186 | Each | 55 ₹10,230 Lowest | 70 ₹13,020 | 80 ₹14,880 | 85 ₹15,810 | 60 ₹11,160 | 60 ₹11,160 |
| 1.08 | S&F in replacement of unserviceable check nut 6mm thick suitable for 32mm bore GI pipe charpoy of approved make complete all as specified and directed . | 246 | Each | 12 ₹2,952 | 10 ₹2,460 | 20 ₹4,920 | 6 ₹1,476 Lowest | 10 ₹2,460 | 10 ₹2,460 |
| 1.09 | M&L painting to charpoy GI pipe with one coat of synthetic enamel paint of approved shade (Make Berger/AsianPaint) and as directed. | 1,880 | Each | 20 ₹37,600 Lowest | 50 ₹94,000 | 80 ₹1,50,400 | 30 ₹56,400 | 50 ₹94,000 | 50 ₹94,000 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
22 Jul 2025, 6:00 pmClosed
GE NORTH DELHI CANTT 10
GE NORTH DELHI CANTT 10
REPAIR TO CHARPOY GI PIPE AND MISC FURNITURE ISSUED TO OTM MD ACCN UNDER GE NORTH DELHI CANTT 10
2025_MES_716369_1
GE/North-07/2025-26
Open Tender
Civil Works
Item Rate
270 days
GE NORTH DELHI CANTT 10
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE NORTH DELHI CANTT 10
₹98,000
Yes
1 Oct 2025
24 Jun 2025
24 Jul 2025
24 Jun 2025
22 Jul 2025
8 Jul 2025
Amount
REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220)
S&F 12mm thick plywood commercial type BWR grade size 1980mm x 900mm x 12mm thick (in one piece only) as top of the charpoy GI Pipe with mild steel Screw bolt (Machine made) of size 40mm long, 6mm thick with hexagonal or square head at one end and screw the other, including removal of old unserviceable ply top.complete all as per specified and directed.
M&L dismantling of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32mm size bore duly ISI marked including threading at both ends complete all as specified and directed.
M&L dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Srl No 1.02 to the required size for short rail including threading at both ends complete all as specified and directed .
Removing of old unserviceabe legs of charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 1.03 above by cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed.
Supply and fixing MS Iron strips 08 Nos of size 50mm x 6mm, 75mm long duly holed/drilled and welded to rails of charpoys each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as directed. Note : One number of MS flat iron strip 50mm x 6mm x 75mm long is measured as one unit.
S&F flat MS iron 02 Nos of size 50mm x 6mm thick, 900mm long providing 02 Nos of holes / drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts & bolts with washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as directed. Note : One number of MS flat iron strip 50mm x 6mm x 900mm long is measured as one unit.
M&L dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI Pipe med grade 32mm bore pipe complete all as specified and directed .
S&F in replacement of unserviceable check nut 6mm thick suitable for 32mm bore GI pipe charpoy of approved make complete all as specified and directed .
M&L painting to charpoy GI pipe with one coat of synthetic enamel paint of approved shade (Make Berger/AsianPaint) and as directed.
REPAIR TO TABLE COMPUTER WITH DRAWER :
Removing of unserviceable top of Table computer in any positon, S&F new top made out of 18/19mm thick exterior grade MDF board of approved shade (ISI Marked) including 4mm teak wood alround the edges with suitable screws.
Removing of unserviceable bottom shelf of table computer in any positon, S&F new bottom shelf made out of 18/19mm thick exterior grade prelaminated MDF board of existing shade (ISI Marked) to be fixed with suitable screws.
Removing of unserviceable telescopic channels in any position, S&F new steel telescopic channels with screws (ISI Marked).
All as per the description of ser item No 2.01 here in before but key board tray of table computer
Repairs of damaged parts, scraping of existing coat of paints filing, finishing and painting of table computer with two coats of synthetic enamel paint of approved shade after giving a primer coat with red oxide with spray gun and as directed.
REPAIR TO CHAIR REVOLVING MED BACK WITH ARMS CUSHIONED SEAT AND NET BACK WITH TILT MECHANISM (TP);
Dismantling of unserviceable Jali (Net) of back and S&F new Jali (Net) of approved quality & shade with fine finishing as per existing pattern and as directed.
Labour for removing the existing worn out/ unserviceable seat of chair and S&F new seat upholstred with net duly finished, seat cushion made from moulded PU foam of 80mm thick 32 density as per existing shape and size and as directed.
Labour for removing the existing worn out/ unserviceable net of seat of chair and S&F new net fabric of seat upholstred with net duly finished, as per existing shape and size and as directed.
S&F in replacement of unserviceable Arm Rest of chair as per existing and as directed.
S&F in replacement of unserviceable hydraulic system of chair as per existing and as directed.
S&F in replacement of unserviceable pedestral assembly complete with injection system in black as per existing shape and size to make the whole system serviceable and directed.
Dismantling of unserviceable rollers (wheel) of padestral system S&F new rollers of twin as per existing shape and size and as directed.
REPAIR TO CHAIR VISITOR (TP) ;
Dismantling of unserviceable Jali (Net) of back and S&F new Jali (Net) of back of chair of approved quality & shade with fine finishing as per existing shape and size/pattern and as directed.
Dismantling of unserviceable Jali (Net) of seat and S&F new Jali (Net) of seat of chair of approved quality & shade with fine finishing as per existing shape and size/pattern and as directed.
REPAIR TO CHAIR VISITOR REVOLVING (TP) ;
Dismantling of unserviceable seat and S&F new 12mm TH hot pressed ply wood fully upholstred with rexine of approved shade and moulded Polyurethane foam with PVC liping all around as per existing shape and size and as directed.
Dismantling of unserviceable back and S&F new 12mm TH hot pressed ply wood fully upholstred with rexine of approved shade and moulded Polyurethane foam with PVC liping all around as per existing shape and size and as directed.
REPAIR TO CHAIR PVC WITH ARMS (TP) :
Dismantling of unserviceable seat cushion & tapestry cloth, S&F new seat cushion of size 20"x16"x2" thickness 32 density fully upholstred with tapestry cloth of approved shade and moulded Polyurethane foam as per existing shape and size and as directed.
Dismantling of unserviceable back cushion & tapestry cloth, S&F new seat cushion of size 15"x9"x1" thickness fully upholstred with tapestry cloth of approved shade and moulded Polyurethane foam as per existing shape and size and as directed.
REPAIR TO CHAIR VARANDAH JCOs/ORs (FD/MAP-II/05) :
S&F PVC seat & back 4mm thick wt not less than 1.85kg of seat & back and grooves 10 No on seat & back of size 90x10mm shall be used. Make AMKO/ SUPREME/CELLO.
M&L with gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed.
M&L painting of chair steel frame with two coats of synthethic enamel paint of white shade and after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by mild grinding over a primer coat of red oxide all as directed.
S&F new PVC hard rubber Shoes as per drg or asdirected.
REPAIR TO TABLE DINING ORs OF ALLUMINIUM TOP (FD-165(M):
Dismantling of unserviceable top of table S&F new top of table made up of 18/19mm block board of size 1900mm x 685mm best quality fixed with 22 guage of aluminium sheet with suitable screws on the top as per drg and asdirected.
M&L with gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed.
M&L painting of steel frame with two coat of synthethic enamel paint of approved shade and after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by mild grinding over a primer coat of red oxide all as directed.
S&F new PVC hard Rubber Shoes as per drg or as directed.
REPAIR TO CHAIR CBA STEEL WITH ARMS (FD-75)
Labour for removing the existing worn out/ unserviceable seat of chair CBA steel and S & F new seat frame of size 460 x 420mm made from commercial plywood 12mm thick and 50mm thick 32D foam cushion, duly covered with cloth /rexine of approved quality and shade, duly stitched all as directed.
All as per Sl. No. 9.01 but for back of chair CBA steel of size 460 x 380mm
M&L for welding with 25 x 3.0mm MS flat iron 510mm long with holes to fix nuts and bolts to seat/back frame for fixing seatt/back frame including nuts complete all as specified and as directed.
S&F new PVC Caps.
S&F new PVC arms as per sample.
Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces and applying two coats of synthetic enamel paint of approved shade by GE over one coat of red oxide primer by spraying machine all as specified and directed..
SMS Enterprises (BID ID -3352480)
M/S CHANDER SHEKHAR (BID ID -3359436)
NAVEEN TRADERS (BID ID -3359601)
M/S NEHAL ENTERPRISES (BID ID -3355766)
M/S Parshant Associates (BID ID -3359849)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .