WBPWDTE/AE/BESD-I/e-NIQ 33 of 2025-26

Supplying and Drawing 1.1 KV single core stranded 'FR' Double PVC insulated Three core stranded copper wire (Brand approved by EIC) of the following sizes in the 20 mm polythene pipe and by the GI fish wire and making necy. connection as required 3 core x 36/0.3 (2.5 sqmm) as ECC

3 core x 22/0.3 (1.5 sqmm) as ECC

S & F of PVC water proof Loop box ( Make-Sintex) of size 250 mm x 200 mm x 105 mm comprising of 4 way brass stud/terminal make- AC /DC,having hinged PVC top cover & 4 mm thick with rubber gasket lining ,railway type mechanical locking arrangement, and the box comprising of one 250V,15A kit-kat fuse unit,one NL on porcelain insulator etc. fixed as per requirement with necessary materials as per direction of EIC

Repairing and servicing of Geyser along with cleaning the coil with water Jet , changing heat pipe with necessary tools and tackels.(For vvip.Visit)

Supply fixing of Geyser coil and testing of that coil.

Uninstal of 12 inch Exhaust Fan then Washing the body blade with thener with Reparing the armature coil,Painting and serviceing & and make ready for fixing the same to its original position.

Supply & Fixing new down rod wrie by changing 23/36Cu.flex. write as per direction of EIC.

Reparing the armature coil by soldering loop of coil and hitting burnishing of armature.

Supply fixing of Stainleess steel wire for fan hanging with suitable u clip and crimping both side with jam socket.

Tacking down a.c ceiling fan with co-own tools tackle after necyssary Disconnection of supply.

Opening part by of body for oiling clening the bearing with kerosin oil and testing the fan to its proper speed as per direction of EIC.

Washing the fan body blade with detergent powder etc. and make ready for fixing the same to its original position, after changing the blade screw when necy. Installation and testing the fans to its proper air displacement as per direction of E.I.C

Supply & Fixing new ball bearing make N B C/ TATA as direction of EIC A) 6201

Supply & Fixing new Oil Type Fan capacitor following rating as par Direction of EIC 2.25MFD /2.50 MFD

Supply & Fixing new GM bush bearing of suitable size .

Supply & Fixing new rubber bobin insulators .

Supply & Fixing new jum nuts & blade screw etc.

Changing splite pin by heavy gauge splite pin as per sample.

Supply & Fixing new small splite pin.

Supply & Delivery Exide® Distilled Water, 5 Liters (100% TDS and PH Tested).

Supply & Delivery Exide Battery Compatible [NOT for Other Batteries] Inverter Battery Water Level Float Indicator Cap Set with Fumes Filtration - 1 Set of 6 Pieces for 1 Battery (Yellow-27 mm)

Re-fixing & Rewinding of 12 inch Exhaust Fan Coil as per Direction of E.I.C

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Make- Kolors/Legrand/Anchar) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply & Fixing 240 V 6 A Modular type switch (Make- Kolors/Legrand /Anchar) on existing GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V 16 A Piano key type switch (Make- Kolors/Legrand/ Anchar) on GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make- Kolors/Legrand/ Anchar), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply and Fixing of 240 Volts 10 Amp rated Kit Kat fuse (Make- Kolors/Legrand/Anchar) white colour as per sample and direction of EIC

S & F of 1.1 KV. Gr. 1'' PVC tape (Make - Steelgrip / PWD Appvd / Anchor ) (Red,Yellow , Blue & Green Colour)

S & F of bakelite / perspex top cover on existing switch board as per GS 9 '' x 11 ''

S & F of 3/16 " x 1.5'' long brass screws for the top cover of existing switch board at various location inside the Circuit House with necessary threading & tap the box as per direction of EIC

S & F of 6 Amp Switch cover plat (Make- Kokors) ( Metalic / Silver colour ) as per sample & direction of EIC

S & F of 6 Amp Socket cover plate (Make- Kokors) ( Metalic /Silver colour ) as per sample & direction of EIC

S & F of 16 Amp Socket cover plate (Make- Kokors) ( Metalic /Silver colour ) as per sample & direction of EIC

S & F of Smart Bright Surface 300-2x2 -surface mounted full lit LED luminaries with uniform illumination , long life and less maintenance uniform lighting and the fittings complete with all accessories to Philips-SM360B LED36S L60W60 PSU OD corresponding to Wipro / Bajaj as per direction of EIC

Spring Clip(Material – Steel) Set – for 2X2 Panel light

S & F of LED Lamp 5 W B22 WW( warm white ) B22 LED corresponding to Wipro / Bajaj as per sample & direction of EIC

S & F of LED lamp complete with all accessories to Crompton make Dynary LED Lamp 9 W B22 CDL ( Cool Day Light ) B22 LED corresponding to Wipro / Bajaj as per sample & direction of EIC

S & F of cheap light with driver FOR Bolard Light as per sample & direction of EIC

Supply and Delivery of 1.1KV grade 1.5 sqmm unsheathed FRLS Cu wire (make- Finolex/ KEI / PWD Appvd ) ) as per direction of EIC

Opening of existing old glow sign board from stracture part by part & thorugh cleaning , of the same using CO's own tools & tackles as per direction of E.I.C.

Opening of acrylic letter of old glow sign board part by part & thorugh cleaning ,of the same and refixing of acrylic letter on GSB using CO's own tools & tackles as per direction of E.I.C.

S & F 3 modular strip Led light (Make- Samsung-Korea/philips /havells/bajaj) with internal electrical wiring as per direction of E.I.C (with minimum 2 Years on site Warranty) [NS]

S & F 400 W outdoor LED SMPS on walls with nuts bolts etc incl. having over voltage protection , over current protection, short circuit protection input 240 V AC output 12 V DC ,4 nos Channel as per direction of EIC.

Checking, cleaning , tightning the VTPN DB, TPN DB, SPNDB, and dismantling the existing defective non functionable MCB from the DB at various location inside the Circuit House after disconnection all the Incoming & outgoing termination and old unserviceable materials deposited to Section,dismetling the defective outdoor fittings & fixtures, pole loop boxes, & checking & cleaning of AC machines,Gyser,LT panel by proper electrician & AC technician, Gyser technician for Main building,Annex building,Karmashree Building,Circuit House Campus,Rest shed & Kitchen,LT Panel room due to Emergencey basis thoughout the for 07 days . as per direction of EIC .

Painting of Steel Tubular Pole of 9 Mtr lengths and 2 no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint

S & F of cheap light with driver FOR Bolard Light as per sample & direction of EIC

Supply and Delivery of 1.1KV grade 1.5 sqmm unsheathed FRLS Cu wire (make- Finolex/ KEI / PWD Appvd ) ) as per direction of EIC

Please Enable Macros to View BoQ information