PERIODICAL SERVICES AND WELCOME MAINT AND REPAIR TO BDY WALL DRAIN PATH AND CLEANING OF SEWAGE LINE AND OTHER MISC WORK AT NCSR CEDU CMDC CCOSW HQ 1 EW BDE 135 I FD WKSP 9 RO HELIPAD COLONY NSOI SPORTS COMPLEX 250 TRANSIT CAMP BIKRAM PARK TARAMOUNT

Amount

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed.

All as per item No 1 above but .exc 1.50 Sqm but not exc 4.00 Sqm complete all as specified and as directed.

Taking down shutters of any description exceeding 1 square metre each and n. exc 2 Sqm complete all as specified and as directed.

Demolition of cement concrete, unreinforced, in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as specified and as directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt, handle, hinges,aldrop bolt etc complete all as specified and as directed.

2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and as directed.

Solid mouled PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing on page No. 150 MES SSR-2004 Part II and complete all as specified and as directed.

Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed.

Anodised aluminium door shutters with frame powder coating of any colour (Thickness or powder coating not less than 50 micron ) , aluminium section weighing 0.55 kg/m including with suitable locking arrangement with lock (Make: Godrej) 4 lever, 5.5mm thick tinted glass, 5mm thick aluminium push plate, hydrolic door closer-01 No, pivet with standard floor spring and pivot on top frame, aluminium tower bolts 300 mm long-01 No, glazing clips, rubber packing for locking purpose with aluminium snap beading screws, handles 2 Nos in each door, hinges, etc. complete all as specified and as directed.

Powder coated (50 micron of approved colour) Aluminum anodised shutter window (glazed or wire gauge) fixed type with aliminium window frame or chowkat 1.50 mm thick sheet & section aluminium anodised of size 100 mm x 44.50 mm and window shutter frames made of (middle, top rail, bottom) and styles 1.5 mm thick aluminium anodised sheet & section of size 44.5 x 44.5 mm including all fittings such as rubber gasket aluminum glazing clips locking cabinet and 75 mm handle and including 4 mm thick tinted glass pane in panes glazed shutter fixed with rubber gasket and glazing clip/aluminium beads and with stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples on gauge shutter including all accessories complete all as specified and as directed.

Venetian blinds of approved make, vertical/horizontal type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed.

Aluminum handles cast type, anodised, 150mm size complete all as specified and as directed.

Aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and as directed.

Mild steel cold rolled butt hinges medium weight 100 mm long, including fixing to pressed steel/wooden/PVC door frame complete all as specified and as directed.

Galvanised mild steel wire cloth cut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.

10 ltr capacity PVC low level flushing cistern symphonic action type white with inlet valve float and handle including brackets, fixed in repairs complete all as specified and directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm including taking down steel tubing with connections complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20 mm including taking down steel tubing with connections complete all as specified and as directed.

S & F in repair Vitreous china squatting pan 'Orissa' pattern size 580x440 mm white with integral foot rest including connection to trap and flushing pipe complete all as specified and as directed.

S&F in repair ball valves of size 20mm bore dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-Charge or Garrison Engineer.

S&F in repair angle valve of brass fancy type, chromimum plated with long shank cast copper alloy screwed down high pressure with capstan head for iron pipe 15mm bore, complete all as specified and as directed. Make : Cat No FON-40053 or its equivalent

S&F in repair PVC connection 15 mm size with PTMT nuts 600mm long, complete all as specified and as directed.

S&F in repair Single piece Water closet wall mounted pattern coloured of size : 370x695x795 mm as approved with connected accessories complete all as specified and directed by Engr-in-Charge . Make : Cat No KUS-WHT-35851S300UF or its equivalent

S&F in repair WHB coloured 420mm x 420 mm x 155mm with connected accesories as approved and complete all as specified and directed by Engr-in-Charge. Make : Cat No CNS-WHT-905 or its equivalent.

15 mm bore centre hole basin mixer with round spout with 450 mm long copper pipes and brass nuts with out Pop up in repair complete all as specified and directed. Make: Cat Part No CON 167KNB and equivalent.

15 mm bore wall mixer/sink mixer fixed in repair complete all as specified and directed.

125 mm dia brass chromium plated shower rose with swivel joints in repair complete all as specified and directed.

15 mm bore long body Bib tap in repair complete all as specified and directed. Make : Cat Part No CON-037KN and equivalent.

Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and as directed. Make : Cat Part No F8030103 and equivalent .

Chromium plated toilet paper holder in repair complete all as specified and directed. Make : Cat Part No ACN 1153N and equivalent.

600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and directed. Make : Cat Part No ACN-1111NM and equivalent.

Soap dish in repair complete all as specified and directed. Make : Cat Part No ACN 1131N and equivalent.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

15 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 upto G+2 story bldgs including microconcreting, jalli and at chajja's and finished surface even and smooth without using extra cement complete with water proofing compound complete all as specified and as directed

15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed

Rendering 5mm thick in cement plaster 1:3 on fair faces of brick work or concrete surfaces as on ceiling complete all as specified and as directed

Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 15mm thick screeding in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.50 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm, complete all as specified and as directed by Engr-in- Charge.

50 mm thick cement concrete 1:4:8 type D-2 (40mm grade aggregate) as in sub base complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like, laid over cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed.

Vitrified tile (Dura stone tiles) of size 300 x 300 x 10mm thick or 400 x 400 x 10mm thick as in floors and over & including 20mm thick screed bed or bedding layer in cement mortar 1:6, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed.

Heavy duty coloured (Dura stone) tiles n exc 0.36Sqm of 10mm thick tiles as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Light shade double charged glossy finish vitrified tile 10 mm thick (Square / rectangular) polished , area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cementy mortar 1:4 complete all as specifed and as directed.

Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished , as in vertical surface/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screed bed or beddding layer in cementy mortar 1:4 complete all as specifed and as directed.

Non skid ceramic coloured floor tiles 7-8mm thick, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18Sqm or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4 complete all as specified and as directed.

Glazed ceramic coloured tiles 300mm x 600mm x 7mm thick as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed.

S&F in repairs solid PVC wall lining (wall panelling design and colour shall be approved by Engr in Charge) consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement & PVC framework/beading as required and fixing at site on PVC frame, complete all as specified and directed.

4mm thick Cement fibre board (designer ceiling) of size 600mm x 600mm panel conforming to IS 14862 type B category three including GI frame work with size of grid 605mm x 605mm including all accessories and GI suspensions, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free, including dismantling existing wall and ceiling boards (fibre pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets,complete all as specified and as directed.

Water proofing treatment to surfaces of walls/concrete slabs damaged due to moisture and efflorescence including sunken areas of bathrooms/toilets, in balconies by applying acrylic polymer modified cementitious high performance coating or treatment all as per manufacturer's instructions, complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Preparation of old wooden surfaces and applying one coat of synthetic enamel paint surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Preparation of old wall surfaces with washing, rubbing down and stopping of distempered wall surfaces and applying one coat of OBD, white/ coloured complete all as specified and directed.

Applying one coats of weather proof exterior emulsion paint (Asian Ultima APEX or Berger Weather Allguard or equivalent) etc including preparation of surface complete all as specified and directed.

Preparation of old decoarated wall/ceiling surfaces and applying one coat of wall care putty (Make: Birla or equivalent) up to G+2 floor height complete all as specified and directed.

Preparation of surface and applying textured painting (granular or impression type), any colour and any position complete all as specified and as directed.

Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed.

Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc, and area n.exc 10 Sqm on plan and getting out in any type soil complete all as specified and as directed.

Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete type D2 (1:4:8) for 100 mm dia pipe all as specified and as directed.

All as per srl item No 61 above but 150mm dia drain pipe all as specified and as directed

All as per srl item No 61 above but 200 mm dia drain pipe all as specified and as directed.

SGSW drain pipe grade 'A' of 100 mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and as directed

All as per srl item No 64 above but 150mm dia complete all as specified and as directed

All as per srl item No 64 above but 200mm dia complete all as specified and as directed

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed

Removing excavated soil to a distance n exc 50m and depositing where directed at a level not exc1.50m above the starting point complete all as specified and as directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100 mm dia SWG pipe all as specified and as directed.

All as per srl item No 69 here in before but 150mm dia complete all as specified and as directed.

All as per srl item No 69 here in before but 200mm dia complete all as specified and as directed.

Cleaning of gully traps/drain pipes/floor traps/water closets/manholes/ of any size and any description and removing waste material etc to a distance not exceeding 50m and burrying in pits and re-filling the same complete all as specified and directed by the Engr-in-Charge . Note:- The cost for excavation and earth work for pits is deemed to be included in the unit rate. (b) Contractors representative/ Engineer will report to Engr-in-Charge/ concern JE daily in morning to collect complaint for routine/urgent works related to day to day maintenance till completion of contract. (c) All routine/urgent jobs received on docket slip shall be attended within 24 hrs. If the nature of job is such that which cannot be completed within 24 hrs, it shall be immediately brought in to the notice of Engr-in-Chrage, (d) The period for working to the such complains shall be decided by GE/Engr-in-Charge. If delay is more than 24 Hrs & GE/Engr-in-Charge is not satisfied with reason for delay in working then the penalty of Rs. 300/complaint/day shall be recovered from contractor. (e) In case of any dispute arising from above the decision of Accepting Officer shall be final and binding.

Desluding/Dewatering of septic tank/soakage wells including intel/outlet chambers removing out all scum, siltresiduals sludge (both) organic/inorganic nature) after plugging the incomming sewage lines through combined high presure water jetting cum suction (vaccum) type machine mounted on LCV/HCV facility of high presure vaccum and removing the same in the tank to a place outside MOD load meant for the purpose by local municipality all as directed by Engr-in-Charge or Garrison Engineer.

Demolition and beaking up drain CI pipe/AC pipes/ PVC Pipe set in cement mortar 100 mm and below complete all as specified and as directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm complete all as specified and as directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and as directed

PVC(SWR) bends 110 mm dia with access door complete all as specified and as directed

PVC(SWR) junction double,(Single T), equal or unequal. 110 mm dia complete all as specified and as directed

CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm in repair complete all as specified and as directed.

PVC (SWR) gully trap of I25/110 mm dia set and jointing wilh solvent cement complete all as specified and directed.

Sand cast cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to wals bore of pipe 100mm dia complete all as specified and directed.

Sand cast cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls bore of pipe 75mm dia complete all as specified and as directed.

Demolition of Bricks or stone masonry built in cement mortar complete all as specified and as directed

Brick work with sub class 'B' brick, straight or curved on plan exc 6 M Mean radius built in type CM 1:6 complete all as specified and as directed.

All as per srl item No 84 above but except brick only complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in manholes, septic tank, filter bed, walls, drains etc complete all as specified and as directed.

Walling of random rubble masonary, Squre, recangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in external surfaces of man holes, septic tank, filter bed etc incl removing of debries complete all as specified and as directed.

Raised pointing to random or polygonal rubble masonary coursed or un coursed in CM (1:3) complete all as specified and as directed.

Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4). (Note:- reinforcement will be measured and paid seperately.)

TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as directed.

Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified.

Cement concrete type D 2 (1:4:8) (using 40mm graded stone aggregate) as in foundation filling and mass concerete complete all as specified and as directed.

Plain cement concrete type B1(1:2:4)( using 20mm graded stone aggregate) as in surface chanels and drains , manhole complete all as specified and as directed.

Plain cement concrete type-B1(1:2:4) (using 20mm graded stone aggregate ) as in benching, Hanching , coping, edging of path and similar work incl necessary form work.complete all as specified and directed.

75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and as directed.

Chequered cement concrete (glossy finish) tile 25cmx25cmx25mm thick or 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment complete all as specified and as directed.

15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified and as directed.

Glazed ceramic wall cladding coloured tiles 300mm x 450mm x 7mm or 300x600x7-10mm thick (design and size as approved by Engr in Charge) as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Framed work such grill griting as doors, gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding eith and including either hooks and hinges or steel hanging door fittings including ornament and intricate design, including pintle hings, stops hand made sliding bolts etc conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

Dismantling of AC sheets (corrugated and semicorrugated etc )/translucent fibre sheets in roofing incl ridge tiles complete all as specified and as directed.

2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

Preparation of new steel surfaces of any descripton not otherwise described over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide on steel surfaces complete all as specified and as directed.

Mild steel joist channel, angle or tee section fixed indepandently for frame work and similar work conforming to Grade Fe-290 Grade E-165 complete all as specified and as directed.

Precast cement concrete louvres and jallies 35-40mm thick set in cement mortar 1:4 type B0 (1:2:4 using 12.5mm graded aggregate etc sample as approved by GE incl takong out old precast jali complete all as specified and directed.

20 mm thick granite (of any type) machine cut as in dado etc laid over cement backing coat and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grainding and polishing and taking down of old stone any type and any description complete all as specified and as directed.

Reinforced cocrete pipe 300 mm dia,class NP-2 laid to floor and wall jointed complete with collars complete all as specified and as directed.

Concrete bed to drain pipes 300 mm dia type 1:3:6 C-2 including paking under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all as specified and directed.

AKBAR FURNITURE HOUSE AND TIMBER MERCHANT (BID ID -3122022)

s l sharma and sons (BID ID -3135445)

M/s LAL DAYAL CONSTRUCTION CO (BID ID -3135292)

SINGH CONST CO (BID ID -3125425)

anil construction co. (BID ID -3120788)