Loading…
Loading…
Tender Value
₹17.5 L
EMD Value
₹35,100
Closing Date
22 Jun 2026, 11:00 am5d left
Executive Engineer Chamba Division HPPWD., Chamba
Executive Engineer Chamba Division HPPWD., Chamba
Construction of One room Govt Senior Secondary School Chaned Distt. Chamba (SH Construction of Building portion)
2026_PWD_136674_5
NO. WA-II- 9693-9742 dated 11.6.2026
Open Tender
Civil Works
60 days
Chamba
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
₹35,100
15 Jun 2026
15 Jun 2026
22 Jun 2026
15 Jun 2026
22 Jun 2026
15 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. | 44.28 | Per Square Metre | 702.7 | ₹31,115.56 |
| 2.01 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including , carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. | 56.88 | Per Square Metre | 561.3 | ₹31,926.74 |
| 3.01 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. | 63.58 | Per Square Metre | 672.5 | ₹42,757.55 |
| 4.01 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (twenty five) design mix to obtain the compressive strenght of 25N/mm square ( twenty five newton per square millimetre ) for reinforced cement concrete work up to floor all level using minimum cement content not less than 360 KG/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work including carriage of material within all lead ,lift and other incedental as per specification approved drawing design and as per direction of Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government . | 19 | Per Cubic Metre | 11,838.8 | ₹2,24,937.2 |
| 5.01 | Providing tor steel reinforcement of Tata / Sail/Shyam of thermo mechanically treated bars of grade Fe-500 D(Fe- five hundred )or more for Reinforced Cement Concrete work including straightening, cutting, bending, placing in position and binding all including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government. | 2,509 | Per Kilogram | 112.4 | ₹2,82,011.6 |
| 6.01 | Second class brick work using Rat & trap bond common burnt clay building bricks as per Arch. drawing in super structure above plinth level upto floor all levels in cement mortar 1:6 (one cement isto six sand) within all leads and lifts as per the direction of the Engineer-in-charge and other incidentials. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. | 15.22 | Per Cubic Metre | 11,059.4 | ₹1,68,324.07 |
| 7.01 | Providing and fixing 35 mm (thirty five millimetre) flush door shutters core of black board construction with frame of first class hard wood and well matched firtst class Indian teak ply veneering with vertical grains of cross band and face vaneers on one face and commercial ply veneering with vertical grains of cross band on other face of shutters or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. | 2.33 | Per Square metre | 2,944.5 | ₹6,860.69 |
| 8.01 | Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. | 2 | Each | 83 | ₹166 |
| 9.01 | Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. | 2 | Each | 91 | ₹182 |
| 10.01 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete 250 X 16 mm ( two hundred fifty into sixteen millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. | 1 | Each | 438.7 | ₹438.7 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.67 MB
Biddocument.pdf
Tender Documents • 4.96 MB
BOQ_202314.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid