MAINTENANCE REPAIR TO EXTERNAL ELECTRIC SUPPLY SERVICE CONNECTIONS POLE PAINTING AND POLE FOUNDATION WORKS AT MT DET JL WING LAXMITEK HARSHAN ENCLAVE I AND II JL WING HARDING LINES DEMO TPS ACHARYA ENCLAVE NAGZEERA LINES DAD MLIRC ABOS 115 TA MAHAR M

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in hard/dense soil, for laying of cable/pipes etc., including taking out old bricks and separating serviceable & unserviceable bricks, cleaning & stacking serviceable bricks for re-use, complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil, as in hard/dense soil, complete all as specified. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

M&L for Dry & clean river sand cushioning in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable, levelled and punned down to a depth of 100mm above the top of the upper-most cable, for cable protection in trenches, complete all as specified and as directed. Note: The punned down thickness shall be measured for payment.

M&L for Well burnt old size sub Class ‘B’ bricks, laid dry & flat in trenches for cable protection, complete all as specified.

Laying Only Old Serviceable Bricks (retrieved bricks), laid dry & flat in trenches for cable protection, complete all as specified.

Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric power cable [heavy duty] of size 4.0core x 10.00Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., including taking down old u/s cable, complete all as specified. Note: Necessary excavation & earth work, brick protection & sand cushioning shall be measured and paid separately under respective items.

All as per Serial Item No. 7 here-in-before but for cable of size 4.0core x 16.00Sqmm.

All as per Serial Item No. 7 here-in-before but for cable of size 4.0core x 25.00Sqmm.

All as per Serial Item No. 7 here-in-before but for cable of size 3.5core x 35.00Sqmm.

All as per Serial Item No. 7 here-in-before but for cable of size 3.5core x 50.00Sqmm.

All as per Serial Item No. 7 here-in-before but for cable of size 3.5core x 70.00Sqmm.

All as per Serial Item No. 7 here-in-before but for cable of size 3.5core x 95.00Sqmm.

S&F GI pipe light grade pipe 40mm dia for cable protection, laid in trenches /pole / walls / road etc., complete all as specified.

S&F GI pipe light grade pipe 50mm dia for cable protection, laid in trenches /pole / walls / road etc., complete all as specified.

S&F GI pipe light grade pipe 80mm dia for cable protection, laid in trenches /pole / walls / road etc., complete all as specified.

S&F IN REPAIR of FRLSH PVC insulated sheathed, multi standard, copper conductor cable of size 3.0 core x 1.5Sqmm, 1100 volts grade and including cable glands, ferrules and connected accessories, multi stranded 1100 Volt grade confirming to IS 694: 1977, for electric connection, complete all as specified and as directed.

M&L for Circuit / Sub main wiring with two runs of 1.5Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 1.5Sqmm as earth wire, drawn through and including rigid PVC conduit of suitable size (minimum 20mm dia) or PVC Casing & Capping, concealed /surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, including taking down old submain wiring of any type, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit.

M&L for Circuit / Sub main wiring with two runs of 2.5Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 2.5Sqmm as earth wire, drawn through and including rigid PVC conduit of suitable size (minimum 20mm dia) or PVC Casing & Capping, concealed /surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, including taking down old submain wiring of any type, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit.

S&F Octagonal hot dip galvanized street light pole of 8 meter height, single arm with top dia minimum 70mm, bottom dia minimum 135mm, made with 3mm thick GI sheet, anchor plate & base plate of size 225mm X 225mm X 16mm fixed with 04 Nos of M20 size foundation bolt of minimum length 750mm, internal & external fabrication of the pole shall be in accordance with IS-2629/BSEN ISO 1461, with and including all necessary civil works i.e earthwork, RCC/PCC foundation as per manufacturers design, including dismantling existing u/s street light pole of any type after disconnecting electrical connections and making good the disturbed surface, complete all as specified and directed. Make: Crompton / Bajaj / L&T Note: The contractor shall submit and approve the foundation drawing issued by the manufacturer before starting the work.

S&F All-in-One Solar street light 60 watts luminaire output (120 Lumen/Watt) with octagonal GI hot dip galvanised pole of height not less than 5meter and consist of high efficiency LEDs, efficient mono crystalline solar panel confirming to IEC 61215, IEC 61730, IEC 61701 & MNRE certified, new age lithium ferro phosphate battery enclosed in corrosion free IP22 CRCA box with suitable ventilation for fresh air and as per BIS certified and a silicon encapsulated high efficiency MPPT charge controller for high efficiency charge controller to change the batteries intelligent microprocessor algorithms automatic determine sunrise and sunset, along with aluminium housing and in-built PIR motion sensor, with a provision for higher charging efficiency, protection for deep discharge, overcharging etc., fixed with 04Nos of M16x600/EN 8 grade foundation bolt, 1 mtr arm for light fixing & RCC / PCC foundation all as per manufacturer's specifications/ instructions, including dismantling existing u/s street light pole of any type after disconnecting electrical connections and making good the disturbed surface, complete all as specified and directed. Make: Crompton / Bajaj / L&T Note: The contractor shall submit and approve the foundation drawing issued by the manufacturer before starting the work.

S&F IN REPAIR LED Post Top outdoor type fitting 15Watt, 230 volts, >100lum/W, with decorative post top for beam angle of ǿ 360°, AC outdoor type with high Pressure Die Cast aluminum Housing and heat resistant toughened glass with frame complete with LED bulb /lamp 15Watt, driver with impact and corrosion resistant complete with IP 65/66 protection, complete all as specified and as directed. Make: Cat Part No. RUBYMINIPT15WLED757PSYMTOPC of Havells or Equivalent make as specified here-in-after.

M&L for Preparation of old painted surface of steel tubular electrical pole of height upto the height of 11meters and applying two coats of aluminium paint over a coat of metal primer, including scraping / complete removal of existing paint & preparation and writing pole number by black paint in yellow circle of 150mm dia, complete all as specified and as directed.

M&L for Preparation of old painted surface of RCC electrical pole of height upto the height of 9meters and applying two coats of premium acrylic emulsion paint and writing pole number by black paint in yellow circle of 150mm dia, complete all as specified and as directed.

M&L for PCC 1:3:6, Type C–2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc., complete all as specified.

Supply, laying, testing and commissioning of HT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric power cable [heavy duty] of size 3.0core x 95.00Sqmm, with stranded aluminium conductor, 11000 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or fixed to wall / pole or through the pipe etc., including taking down old u/s cable, complete all as specified. Note: Necessary excavation & earth work, corrugated / GI protection pipe with clamps shall be measured and paid separately under respective items.

M&L for Plain galvanised iron sheet 0.32mm thick, grade "O" with 120gms/sqm zinc coating for making design box for sign board, including necessry cutting, turning up, mittred angle and making decorative board, shape as required at site, complete all as directed by Engineer-in-Charge.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering etc., with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete, confirming Fe 410 -W (Gde E-250) quality 'A', complete all as specified.?

S&F aluminium anodized frame work such as angle, flat, cleats etc., for fixing of sign board with and including joining cleat or GI machine screws for fixing etc., complete all as directed by Engineer-in-Charge.

M&L for Name / Sign Board by writing letters, figures, names, numbers etc., of approved colour flex print with computer art on a water proof gloss paper, computer art work on planner machine and scotch print / ink jet print 720 DPI for name/sign board, complete as per style, size & shape as directed by Engineer-in-Charge.

DHAIRYASIL RAMAKANT DESAI (BID ID -3188609)

Green Ray Enterprises (BID ID -3195730)

M/s. VIJAY ELECTRICALS (BID ID -3194987)

M/s Sohanil Construction (BID ID -3199052)