Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical responsive |
| 2 | Accepted-Technical | Accepted-Technical responsive |
| 3 | Rejected-Technical | Rejected-Technical non -reponsive as document asked for point no.12,13(B) 13, (c) 13(E) are note submitted by the bidder after asking clarification |
Tender Value
₹10.0 Cr
EMD Value
₹19.9 L
Closing Date
8 May 2026, 6:00 pmClosed
xen
BDA OFFICE
ARC for shifting dismentling of various overhead electrifcation by laying underground cable , BDA Bharatpur
2026_UITBR_554700_1
online nit 06(2026-2027)01 bharatpur Development Authorit
Open Tender
Electrical Works
Percentage
bharatpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,500
Secretary, BDA
₹19.9 L
Yes
BDA office
11 Jun 2026
29 Apr 2026
11 May 2026
29 Apr 2026
8 May 2026
29 Apr 2026
4 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing & making heat shrinkable type indoor/outdoor/straight through terminations/ joint kit suitable for 11 KV / 33 KV (Earthed) cable with required components, prepration of cable ends. Type test report should be as per IS13573:2011 which covered all sequence for table 2 for termination kit and table 3 for streight through joint inclusive thermal & dynamic short circuit test, humidity test, soil fog test. Cross linking shall be done out side factory with E- beam/ peroxide technology. Extrusion process shall be in house OEM within same vicinity. including testing etc. as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
11 KV End Termination Kit Outdoor type
3 core 120/150/185 Sq.mm | 400 | Each | 8,063 | ₹32,25,200 |
| 2 | 11 KV Straight Through Joint Kit
3 core 120/150/185 Sq.mm | 30 | Each | 12,076 | ₹3,62,280 |
| 3 | 33 KV End Termination Kit Outdoor type
3 core 240/300/400 Sq.mm | 120 | Each | 10,332 | ₹12,39,840 |
| 4 | 33 KV Straight Through Joint Kit
3 core 185/240/300 Sq.mm | 10 | Each | 21,657 | ₹2,16,570 |
| 5 | Providing & Laying XLPE insulated three core Armoured Aluminium cable for working voltage 11 K.V.(E) confirming IS :7098 P - 2 with H4- Grade electrolytic aluminium conductor confirming to IS: 8130 class-2 of purity >99.6 %, Insulation Screening: Extruded Semiconducting Compound followed by helically wrapped Copper Tape, round / flat strip armouring of cables , Inner / outer sheath PVC type ST-2 confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
3 core 185.0 Sq.mm | 10,000 | Mtr. | 1,904 | ₹1,90,40,000 |
| 8 | Providing & Laying XLPE insulated three core Armoured Aluminium cable for working voltage 33 K.V.(E) confirming IS :7098 P - 2 with H4- Grade electrolytic aluminium conductor confirming to IS: 8130 class-2 of purity >99.6 %, Insulation Screening: Extruded Semiconducting Compound followed by helically wrapped Copper Tape, round / flat strip armouring of cables , Inner / outer sheath PVC type ST-2 confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
3 core 300.0 Sq.mm | 2,000 | Mtr. | 3,959 | ₹79,18,000 |
| 9 | Supply & fixing and fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . | 25,000 | Kg | 135 | ₹33,75,000 |
| 10 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR.
300.0 Sq. mm
1 core | 1,000 | Mtr. | 627 | ₹6,27,000 |
| 11 | Supplying and drawing overhead steel core Aluminium conductor (ACSR) ISI marked(IS 398 part II-1996) on existing cross arms through insulator with all necessary T&P required including binding and twisting etc. complete in all respect as required. All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
50 Sqmm of (6+1) 3.35 mm (Insulated Rabbit) for LT | 2,000 | Mtr. | 92 | ₹1,84,000 |
| 12 | Supply and installation of spike of M.S. rod 20mm dia 3.0mtr. long for earthing of (tower/pole) drive into earth by mechanical means sturcture connection the spike with cross arm top hamper PCC pole, lattics tower to earth etc. complete as per technical specification of DISCOM. | 1,500 | Each | 1,819 | ₹27,28,500 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.64 MB
BOQ_987964.xls
BOQ • 0.29 MB
biddocumet.pdf
Tender Documents • 5.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .