PROVN OF TOILET AND BATHROOM WITH ALLIED INFRA FOR AT COY AND PROVN OF ELEVATED SENTRY POST WITH ALLIED INFRA FOR NFS NODE POONCH AND SPECIAL REPAIR TO BLDG NO T22 OF 71 FD COY ENGR UNDER GE 881 EWS

Amount

Total Amount of Sch 'A' Part - I (Building Work)

Total amount of Sch 'A' Part-II (Site Clearance Work)

Total Amount of Sch 'A' Part -III (Internal electrification Work )

Total Amount of Sch 'A' Part -IV (Internal water supply Work )

Total Amount of Sch 'A' Part -V (Plumbing work )

Total Amount of Sch 'A' Part -VI (Road/Path work )

Total Amount of Sch 'A' Part -VII (Sewage disposal work )

Total Amount of Sch 'A' Part -VIII (Area drainage )

Total Amount of Sch 'A' Part - IX (External water supply Work )

Total Amount of Sch 'A' Part -X ( External electric supply Work )

Total Amount of Sch 'A' Part -XI ( Special repair to Bldg no T-22 B/R portion)

SCHEDULE 'A' PART- XI (Misc item of work) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under col of "Pre Priced rate" signifies this fact only.

(INTERNAL ELECTRIFICATION WORK)

Angle lamp holder insulated body with back plate for batten fittings and including LED lamp 9 watts White non dimmable B-22 holder base with polycarbonate body complet all as directed. Make C&S Cat Part No LTHPLED LAMP 9W/B22 or equal in Bajaj/ Philips /Havells as approved.

LED light fitting, single tube, 1 x 20 w LED, T8, 230 V (power factor not less than 0.90), box type, CRCA body, bipin holders connector blocks, etc. Complete with all accessories internally pre-wired, including LED lamp T8 20 W with aluminium heat shrink and connecting up with PVC insulated and sheathed, 1100 volts grade, flexible, multistranded 1.0 sqmm copper conductor three core cable complete all as directed.

Street light fitting 25 watt LED, IP-65 protection, single peice pressure die cast aluminium housing high grade powder coated finish with heat resistant toughened clear glass cover for lamp and control gear compartment with high voltage surge protection device upto 5 KV, prewired including 1.60m long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of FI 40 x 6mm with bolts, nuts and washers and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified and directed. Make: CG Cat part No LSTP-25-CDL or equivalent in Philips/Bajaj.

Distribution board, IP-43 in sheet metal enclosure duly flushed in wall, when MCB to be used with 200 Amps rated copper bus bar confirming to relavent IS SPN 8 way complete all as specified.

Distribution board, IP-43 in sheet metal enclosure duly flushed in wall, when MCB to be used with 200 Amps rated copper bus bar confirming to relavent IS SPN 12 way complete all as specified.

MCB single pole 240 volts 6-32 Amps including providing thimble for out going cables 50Hz all as specified and directed.

MCB single pole & neutral, 240 volts 63 Amps, 10 Ka including providing thimble for out going cables 50Hz all as specified and directed.

Heavy duty exhaust fans with turbo force, 1400 rpm, single phase, 300 mm sweep AC 50 Hz with all its accessories all as specified and directed. Cat part No Turbo force SP of havells or its equivalent in CG/Khaitan

(Sewage disposal) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under col of "Pre Priced rate" signifies this fact only.

On site conventional type LLDPE tank designated to carry sewage and sullage water, including excavation in any type of Soil, PCC 1:4:8 below foundation, vent shaft, connection etc, complete for 30 users.

On site conventional type LLDPE tank designated to carry sewage and sullage water, including excavation in any type of Soil, PCC 1:4:8 below foundation, vent shaft, connection etc, complete for 10 users.

(Special repair to Bldg) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under col of "Pre Priced rate" signifies this fact only.

Providing and fixing 4mm thick designer cement fiber ceiling board of size 600x600mm in ceiling fixed with screws as per manufacturer's instructions (Make : Everest & M/s Visaka Industries Ltd or equivalant) laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated in white colour. The frame shall comprise of main runner made from 0.33mm thick galvanised steel sheet and size of 24x32mm and spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum at centres making a grid of size 600x600mm. Hangers of G.I. wire max 4mm dia to be fixed by the approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fitting of 1200mm long cross tee with(double stitching) to be interlocked between main runner at 600mm centre to from 1200x600mm modules cross T longer than 600mm modules to be formed by fitting 600mm long cross T, T preremeter wall angle shall be of 0.45mm thick galvanised steel of size 19x19mm of powder cated white colour all as per instruction complete all as specified and directed.

Sub total of Schedule 'A' Part-XII

Prakash Trading Corporation

M/S RAJ ENGINEERS