Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹21.9 L+₹1.6 L (7.71%)Rejected-Finance NIVADA TIVAYA ROAD TIVYA MUST BUS STOP VILLAGE KHATAULI SAHARANPUR UP 247001 | SAHARANPUR | SAHARANPUR | UP | 247001 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹22.6 L+₹2.3 L (11.4%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹23.1 L+₹2.8 L (13.9%)Rejected-Finance 13 218 MASJID EXTEN SADAR BAZAR | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹24.5 L+₹4.2 L (20.5%)Rejected-Finance | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹39.9 L
EMD Value
₹79,700
Closing Date
29 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt 110010
Garrison Engineer South Delhi Cantt 110010
REPAIR/REPLACEMENT OF E/M NATURE OF WORKS AT VARIOUS OTM ACCN AT HQ DGIS, IHQ OF MOD (ARMY), 1 CBPO, PLI, IML, 10 JAKLI, WARDEC UNDER AGE E/M OF GE (SOUTH) DELHI CANTT-10
2022_MES_556434_1
GE/DS-77/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE South Delhi Cantt
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹79,700
Yes
20 Dec 2022
7 Oct 2022
31 Oct 2022
7 Oct 2022
29 Oct 2022
22 Oct 2022
Amount
Attending complaints for checking the existing electrical items for continuous electric supply including carrying out minor repair etc as required to make the item functional and replacing fuse, small pieces of copper wire, copper cable as of suitable size at site, insulation tape roll etc. Attending minor repair such as testing, electric connections, fittings, nut, bolts and screws etc to ceiling fan, exhaust fan at its initial position (without taking down) etc, emergent complaints i.e. no light, earth leakage, short circuit, neutral break in mains/sub mains/internal circuits of existing electrical system of main building/block and making continuous electric supply including carrying out minor repairs etc. required to make the system in order/functional with insulation tape roll, copper thimbles, glands, earthing wire as required at site complete all as specified and as directed.
Notes for Srl item No. 01 :- This item is applicable only where no store is required. 1. The site for attending complaints are HQ DGIS, IHQ of MoD (Army), 1 CBPO, PLI, IML, 10 Jakli and WARDEC. Contractor shall provide minimum Three tradesmen (electrician) to attend the complaints all the above areas in all working days between 0830Hrs to 1700Hrs including holiday and sunday if electrician will not come a recovery of Rs 1000/- per day shall be recovered from the contractor due. 2. Contractor shall ensure the security passes for his staff, to be obtained from concern authority for attending complaints. 3. The contractor will ensure that the team of electricians with necessary tools bag shall always remain present at complaint cell to attend the complaints. 4. A recovery of Rs. 500/- for not attending the complaint upto 04 hours and after 04 hours Rs. 1000/- shall be recovered from the contractor due. 5. All the complaint slip, register & other connected document will be provided by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and the same may be asked for verification at the time of payment of each RAR/Bill. 7.The above tradesmen shall not be utilize for the complaints where material is required and these complaint shall be measured and paid seperately as S&F here-in-after.
S&F in repairs switch piano flush type 6 Amps SP one way as per sample complete all as specified and as directed.
S&F in repairs switch piano flush type 6 Amps SP 2-way as per sample complete all as specified and as directed.
S&F in repairs bell push, flush type 6 Amps as per sample complete all as specified and as directed.
S&F in repairs socket outlet 6 Amps flush mounted piano type 5 pin multi purpose as per sample complete all as specified and as directed.
S&F in repairs switch piano flush type 16 Amps SP one way as per sample complete all as specified and as directed.
S&F in repairs socket outlet 2 in 1 (multipurpose) 6 and 16 Amps flush mounted type as per sample complete all as specified and as directed.
S&F in repairs Angular lamp holder bakelite insulated body with back plate suitable for batten fitting as per sample complete all as specified and as directed.
S&F in repairs bell Ding dong type 230 volts single phase as per sample complete all as specified and as directed.
S&F in repairs ceiling rose surface Bakelite 65x25 mm two to three terminals as per sample complete all as specified and as directed.
S&F in repairs fan regulator electronic, Socket/Switch type, suitable for ceiling fan 1200/1400 mm sweep as per sample complete all as specified and as directed.
S&F in repairs fan condenser 2.5 Mfd as per sample complete all as specified and as directed.
S&F in repairs fan condenser 3.15 Mfd as per sample complete all as specified and as directed.
S&F in repairs LED Bulb 12 Watt B-22 Cap, AC 230V, 50 Hz, as per sample complete all as specified and as directed.
S&F in repairs Comfortable wall light fitting suitable for LED Bulb B-22 Cap as per sample complete all as specified and as directed.
S&F in repairs Wall mounted LED Integrated Batten T5 20 Watt - 4Ft White, indoor decorative PVC extruded T5 LED battern-Integrated type as per sample complete all as specified and as directed.
S&F in repairs Wall mounted LED Integrated Batten T5 10 Watt-2 Ft White, indoor decorative PVC extruded T5 LED battern -integrated type as per sample complete all as specified and as directed.
S&F LED 5 Watt batten type fitting, indoor decorative aluminium extruded T-5 LED Battern-integrated type (1 Ft) as per sample complete all as specified and as directed.
S&F in replacement LED 10 Watt white bulk head in engineering plastic housing with clear prismatic including required LED bulb and all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz as per sample complete all as specified and as directed.
S&F LED Building security light fitting 40W on existing bracket in repairs of old unsv existing security light fitting any type as per sample complete all as specified and as directed.
S&F in repairs PVC insulated FRLS single core with stranded copper cable of size 1.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed.
S&F in repairs PVC insulated FRLS single core with stranded copper cable of size 2.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed.
S&F in repairs PVC insulated FRLS single core with stranded copper cable of size 4 Sqmm for any type of wiring as per site requirement and directed in Red/Blue/Yellow&Black&green colour complete all as specified and as directed.
S&F in repairs PVC insulated FRLS single core with stranded copper cable of size 6 Sqmm for any type of wiring as per site requirement and directed in Red/Blue/Yellow&Black&green colour complete all as specified and as directed.
Taking down of old unserviceable ceiling fan/exhaust fan dismantling of blades, transportation to work shop and carrying out rewinding, transportation to site, reinstallation and testing complete all as specified and as directed. Note : Rewinding will be measured and paid separately under this Schedule.
M&L for Rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing where ever required complete all as specified and as directed. Note : Gun metal bush, clamp, shaft, rod, bearing and painting of fan with good quality of synthetic enameled paint and including lathe machine work if necessary to making a upper/lower sheet of fan will be measured under of this item only.
All same as per ser item No 26 but exhaust fan 230/300/450 mm sweep.
S&F in repairs MCB DB SPN 8 Way double door type,(IP 43 Protection) flush mounting complete all as specified and as directed.
S&F in repairs MCCB 4 Pole 415V, Adjustable type, 125 Amps with breaking capacity 25 KA as per sample complete all as specified and as directed.
S&F in repairs for MCB SP 06 to 40 Amps 240 Volts, 10 KA, `B' curve, as per site requirement as per sample complete all as specified and as directed.
S&F in repairs for MCB SPN 63 Amps, 240 Volts, 10 KA, `B' curve, as per site requirement as per sample complete all as specified and as directed.
S&F in repairs MCB TPN 63 Amps 415 volts, 'B' Series 10 KA as per site requirement as per sample complete all as specified and as directed.
M&L for sub main wire using FRLS insulated unsheathed mulitistrand copper conductor FRLS PVC cable 2 runs of size 6 Sqmm for phase and neutral and 6 Sqmm for earthing drawn through rigid PVC casing caping/PVC condute pipe not less than 25mm dia including taking down fixed on wall/ground/ceiling etc and making good the disturbed surface to same the joining surface with OBD/ Colour Wash/ White Wash and complete all as specified and as directed. Note:- (i) Phase should be Red/Yellow /Blue, neutral should be black and earthing wire should be green colour. (ii) Two run of cable for phase /neutral and one run of cable for earth incl casing caping / conduit pipe will be measured and paid as one unit length.
S&F in repairs of distribution board V-TPN 4 way for fixing MCCB 125 Amps as incommer and MCBs as out goings with metal door and IP 43 Protections and connecting, complete all as specified and as directed.
M&L for earthing complete with GI earth plate electrode 600 x 600 x 6mm thick burried directly in ground in ground (earth pit plate kess than 2.5 mtrs below ground level) with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade with funnel and locking arrangement complete all as specified and as directed.
M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicate dsituation for loop earthing etc. as required 4mm dia galvanised iron complete all as specified and as directed.
Taking down carefully the old U/S Aluminium / Copper point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete all as specified and as directed.
M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through existing concealed/wall surface PVC conduit and including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) complete all as specified and as directed. Notes :- In existing conduit wiring new conduit will be added where there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes.
All as per Srl item No. 37 above but One light point controlled by two 2-way switch 230 volts.
All as per Srl item No. 37 above but One 3 Pin socket outlet 5 Amps independent board
All as per Srl item No. 37 above but One 3 Pin socket outlet 5 Amps point on same board
All as per Srl item No. 37 above but One 3 Pin socket outlet, 15 Amps on independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point.
S&F in repairs thermostat (9/11 Inch long) for any make of Geysers of capacity 25 Ltrs as per sample complete all as specified and as directed.
S&F in repairs heating element 1.5 KW for any make of Geryser of capacity 25 Ltrs as per sample complete all as specified and as directed.
S&F in replacement of plastic laminated sheet top cover 3mm thick of size 8"x5" fitted with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete as per sample. Make : Anchor, Hylum, Mayur.
S&F in replacement of plastic laminated sheet top cover 3mm thick of size 11"x9" fitted with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete as per sample complete all as specified and as directed. Make : Anchor, Hylum, Mayur.
S&F in replacement of MS sunken box of size 8"x11" to fixing of switch board concealed with necessary screws and washers complete as per sample complete all as specified and as directed.
Taking down and re-fixing electronic/pre-paid meter in meter box with consultation with pre-paid meter authorities including necessary connections of incoming and out going cable for light and power all as specified and as directed.
S&F in replacement sheet metal enclosure of size 350 x 300 x 150 mm suitable for mounting electronic meter fabricated from CRCA sheet with anti corrosive dust and vermin proof complete all as specified and as directed. Note :- The meter cover shall have a transparent window. The window shall be of transparent, high grade UV stabilizer engineering plastic for easy reading of all the displayed values/parameters and observation of operation indicator. The window shall preferably be an integral part of meter cover.
S&F in replacement of single phase induction motor AC 230V, 1300 RPM copper wounded suitable for fresh air fan 200mm sweep as per sample complete all as specified and as directed.
S&F in replacement of single phase induction motor AC 230V, 1350 RPM copper wounded suitable for fresh air fan 300mm sweep as per sample complete all as specified and as directed.
S&F in replacement of single phase induction motor AC 230V, 1500 RPM copper wounded suitable for fresh air fan 450mm sweep as per sample complete all as specified and as directed.
S&F in replacement of single phase induction motor AC 230V, 1400 RPM copper wounded suitable for wall mount fan upto 450 mm sweep as per sample complete all as specified and as directed.
S&F in replacement PVC Pipe brass nipple 15 mm x 600 mm for Hot & Cold water with brass nuts and washers stainless steel at both ends of length not exc. 60 cms for connection of stainless steel as per sample complete all as specified and as directed.
S&F 2x2 Panel light surface mounted LED light of 40 W fixture with opal diffuser to give glare free light including suitable LED light of 40 W suitable for RCC/POP ceiling supplied with wedge bracket to fix in existing ceiling in replacement of existing old unsv CFL fitting any type from ceiling of common areas and making good disturbed surface/POP ceiling to match and getting electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and as directed.
S&F recessed/surface mounting 40 watt 1' x 4' ' flat LED panel fitting with soft light and glare free symetrical ilumination suitable for RCC/POP ceiling supplied with wedge bracket to fix in existing ceiling in replacement of existing old unsv CFL fitting any type from ceiling of common areas and making good disturbed surface/POP ceiling to match and getting electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and as directed.
S&F in replacement of Metal clad plug and socket 20 Amps with MCB SP and steel enclosure as per sample complete all as specified and as directed.
M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable through existing concealed PVC/ MS conduit and including replacement of modular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with frame incuding all accessories 1.5 sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surface of walls including necessary touch up with adjoining surface of disturbed area i.e with OBD/colour work/white wash as existing finishes complete all as specified and as directed. Note :- In existing conduit wiring new conduit will be added if there is a blockage/damage to the existing conduit including bends/elbows/tees/junction boxes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete.
All as per item No 53 above but, one 3 pin 5 Amps socket outlet point controlled by one number one way modular switch/socket on independent board.
All as per item No 53 above but, one 3 pin 5 Amps socket outlet point controlled by one number one way modular switch/socket on same board.
All as Item No 53 above but, 16 Amps for modular socket with 2.5 Sqmm for phase and neutral and 2.5 Sqmm for earthing on independent board.
All as Item No 53 above but, for one AC point controlled using cable of 4 Sq mm for phase and neutral and 4 sqmm for earthing.
S&F Switch modular type, 1 Module, 6 Amps one way as per sample complete all as specified and as directed.
S&F Socket outlet modular type 2M, 2/3 pin, 6 Amp as per sample complete all as specified and as directed.
S&F Switch modular type 1M, 16 Amp as per sample complete all as specified and as directed.
S&F Socket Outlet modular type 2M combined shuttered, 5 pin 6/16 Amp as per sample complete all as specified and as directed.
S&F Electronic fan regulator, modular type 2M, 4 steps, as per sample complete all as specified and as directed.
S&F Bell push modular type 1M 5/6 Amp as per sample complete all as specified and as directed.
S&F LED 12 Watt round dowlighter made with white colour injection moulded pylycarbonate housing for improved life and efficency designed to deliver not just high efficency but also a superior quality of light including flexible wire of suitable size as per sample in replacement of old unservicable down lighter fitting complete all as specified and as directed.
Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.
Chaudhary Constructions
aggarwal engineers contractors
verma enterprises
ramveer Singh
Microsys Controls India
A N BUILDERS
Surjit and Sons
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .