Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.8 CrAdmitted-Finance | ₹6.8 Cr | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Kamal Kumar L1 |
|---|---|---|---|---|
| 1.01 | Excavation in hilly areas in all heights and depths and in all kinds of soil by all means including saturated soil comprising of ordinary soil ,ordinary rock ,soft rock ,hard rock chiseling/wedging out rock(where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required lines, grades, width, cutting and trimming of side slopes and levels as shown on the drawings and as directed by Engineer-in-Charge at site, according to the MORD technical specification section 300 and 1600 and sorting out useful materials and stacking the same within all leads and lifts in acquired road width of the road and transportation of useful materials for filling in roadways camber ,embankments for grade improvements and disposal of all surplus materials to required width of the road or on approved dumping sites through all modes of transportation including head load or animal transport or mechanical means alongwith its leveling fine dressing and hauling /carriage of machineries ,materials, tools ,equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. Recovery of stones to the tune of 2096.01 cubic metre (Two thousand ninety six decimal zero one cubic metre ) quantity at the rate of Rupees 300/- only (Rupees three hundred only) per cubic metre shall be effected from the contractor,s running bills actually excuted at site on pro-rata basis for the quantity of cutting in earth work executed . Any loss to the public/ private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases, including carriage of materials with in all leads and lifts. The rate is including octroi, royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST. | 10,950.27 | Per cubic metre | - |
| 2.01 | Loosening of the ground upto a level of 300 mm (Three hundred millimetre) below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per M.O.R.D.Technical Specification Clause 303 in all leads, lifts and other incidental complete in all respect including hauling /carriage of materials to various location through all modes of transportation in and as per the direction of Engineer-In-Charge.The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST. | 3,492.57 | Per cubic metre | - |
| 3.01 | Construction of subgrade and earthen shoulders with approved material obtained from borow pits including transporting to site, spreading, grading to require slope and compacted to meet requirement of table 300.2 as per M.O.R.D. technical specification clause 303 and 407 in all leads, lifts and other incidental complete in all respect including hauling /carriage of materials to various location through all modes of transportation in and as per the direction of Engineer-In-Charge.The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST. | 5,387.81 | Per cubic metre | - |
| 4.01 | Earth work in excavation for structures in all depths as per drawing and M.O.R.D.technical specification section 300 and 1600 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal in all lead and lift including dressing of sides and bottom and back filling in trenches with excavated Suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines grades, side slopes, width, camber super elevation and level as shown on the drawings or as directed by the Engineer-in-Charge hauling and stacking of materials useful for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner, filling of unevenness blind age and finishing the road to specified dimension or as directed by the Enginer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other causes it shall be removed by suitable diversion, bailing out or pumping as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of excavation shall be the whole responsibility of the contractor which shall have to be duly compensated by him at his own cost in all cases.The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST. | 7,706.76 | Per cubic metre | - |
| 5.01 | Back filling with granular material behind abutments, wing walls, return walls , R/wall complete as per drawing and M.O.R.D. technical specification clause 1203 and section 1604 , as per direction of Engineer-In-Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect. The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST. | 731.64 | Per cubic metre | - |
| 6.01 | Providing , laying and spreading soil on a prepared sub-grade, pulverising, adding the designed quantity of cement to the spread soil , mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and form a layer of sub-base/base as per M.O.R.D. Technical specifications clause 404, as per the entire satisfaction and direction of Engineer-in-Charge within all leads, lifts and other incidental .The rate is including royality, Malkana,Tol tax or other taxes imposed by the Government excluding GST. | 661.4 | Per cubic metre | - |
| 7.01 | Construction of granular sub-base by providing well graded material mixing in a mechanical mix plant and carriage of mixed material to site of work in all leads and layers in uniform layers with motor grader and compacting with smooth wheel 80-100( eighty -hundred) KN static roller to achieve the desired density, complete as per M.O.R.D. Technical specifications clause 401 for grading -I material, as per the entire satisfaction and direction of Engineer-in-Charge within all leads, lifts and other incidental .The rate is including royality, Malkana,Tol tax or other taxes imposed by the Government excluding GST. | 1,173.96 | Per Cubic metre | - |
| 8.01 | Providing, laying, spreading by manual / mechanical means and compacting to 75mm (seventy five millimetre) compacted thickness, graded, broken / crushed stone aggregate, for grading-II, 63mm to 45 mm (sixty three millimetre to forty five millimetre) nominal size to water bound Macadam, specification including spreading in uniform thickness using template, hand packing rolling with three wheel 80-100 (eighty - hundred) KN static roller in stages to proper grade and camber including applying and brooming with screening of type-B size 11.2 mm (eleven point two millimetre) nominal size at the rate of 0.20 cum (zero point twenty cubic metre) per ten square metre and binding material at the rate of 0.06 cum ( zero point zero six cubic metre ) to fill up the interstoces of coarse aggregate , watering and compacting to the required density as per MORD technical specifications clause 405 or as directed by the Engineer-In-Charge including carriage of materials within all leads, lifts and other incidentals. The rate includes octroi, royality, Malkhana, toll tax or other taxes imposed by the Govenment excluding GST. | 291.05 | Per Cubic metre | - |
| 9.01 | Providing , laying , spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (pug Mill) , carriage of mixed material by tipper to site , laying in uniform layers in sub-base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100 (eighty to hundred) KN weight to achieve the desired density including lighting, barricading and maintenance of diversion etecetra as per Tables 400.11 and 400.12 and Technical clause 406 as per the entire satisfaction and direction of Engineer-in-Charge within all leads, lifts and other incidental .The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST. | 2,508.07 | Per cubic metre | - |
| 10.01 | Providing, laying, spreading and compacting mechanical means and compacting to 75mm (seventy five millimetre) compacted thickness, graded, broken / crushed stone aggregate, for grading-III, 53mm to 22.4 mm (fifty three millimetre to twenty two point four millimetre) nominal size to water bound Macadam, specification including spreading in uniform thickness using template, hand packing rolling with three wheel 80-100 (eighty - hundred) KN static roller in stages to proper grade and camber including applying and brooming with screening type -B of size 11.2 mm (eleven point two millimetre) nominal size at the rate of 0.18 cum (zero eighteen cubic metre) per ten square metre and binding material at the rate of 0.06 cum ( zero point zero six cubic metre ) to fill up the interstoces of coarse aggregate , watering and compacting to the required density as per MORD technical specifications clause 405 or as directed by the Engineer-In-Charge including carriage of materials within all leads, lifts and other incidentals. The rate includes octroi, royality, Malkhana, toll tax, or other taxes imposed by the Govenment excluding GST. | 0.66 | Per Cubic metre | - |
Tender Value
₹7.7 Cr
EMD Value
₹15.3 L
Closing Date
10 Feb 2020, 5:00 pmClosed
Chief Engineer
Kangra Zone HPPWD Dharamshala
Formation cutting, Construction of passing places, Missing CD, side drain, Parapets, Crash barrier, CC pavement and tarring work including five year maintenance after completion Under PMGSY-II (Batch-I for, 2019-2020)Package No HP-02-06
2020_CEHP_87919_1
CE (KZ) HPPWD D/Shalla No. 3792-3820 dt. 10-01-20
National Competitive Bid
CIVIL
Item Rate
365 days
Salooni
Please refer Tender documents.
15 documents required · 15 mandatory
₹5,000
Executive Engineer Salooni Division HPPWD Salooni
₹15.3 L
19 Feb 2020
20 Jan 2020
11 Feb 2020
20 Jan 2020
10 Feb 2020
20 Jan 2020
Amount
Excavation in hilly areas in all heights and depths and in all kinds of soil by all means including saturated soil comprising of ordinary soil ,ordinary rock ,soft rock ,hard rock chiseling/wedging out rock(where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required lines, grades, width, cutting and trimming of side slopes and levels as shown on the drawings and as directed by Engineer-in-Charge at site, according to the MORD technical specification section 300 and 1600 and sorting out useful materials and stacking the same within all leads and lifts in acquired road width of the road and transportation of useful materials for filling in roadways camber ,embankments for grade improvements and disposal of all surplus materials to required width of the road or on approved dumping sites through all modes of transportation including head load or animal transport or mechanical means alongwith its leveling fine dressing and hauling /carriage of machineries ,materials, tools ,equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. Recovery of stones to the tune of 2096.01 cubic metre (Two thousand ninety six decimal zero one cubic metre ) quantity at the rate of Rupees 300/- only (Rupees three hundred only) per cubic metre shall be effected from the contractor,s running bills actually excuted at site on pro-rata basis for the quantity of cutting in earth work executed . Any loss to the public/ private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases, including carriage of materials with in all leads and lifts. The rate is including octroi, royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Loosening of the ground upto a level of 300 mm (Three hundred millimetre) below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per M.O.R.D.Technical Specification Clause 303 in all leads, lifts and other incidental complete in all respect including hauling /carriage of materials to various location through all modes of transportation in and as per the direction of Engineer-In-Charge.The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Construction of subgrade and earthen shoulders with approved material obtained from borow pits including transporting to site, spreading, grading to require slope and compacted to meet requirement of table 300.2 as per M.O.R.D. technical specification clause 303 and 407 in all leads, lifts and other incidental complete in all respect including hauling /carriage of materials to various location through all modes of transportation in and as per the direction of Engineer-In-Charge.The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Earth work in excavation for structures in all depths as per drawing and M.O.R.D.technical specification section 300 and 1600 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal in all lead and lift including dressing of sides and bottom and back filling in trenches with excavated Suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines grades, side slopes, width, camber super elevation and level as shown on the drawings or as directed by the Engineer-in-Charge hauling and stacking of materials useful for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner, filling of unevenness blind age and finishing the road to specified dimension or as directed by the Enginer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other causes it shall be removed by suitable diversion, bailing out or pumping as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of excavation shall be the whole responsibility of the contractor which shall have to be duly compensated by him at his own cost in all cases.The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Back filling with granular material behind abutments, wing walls, return walls , R/wall complete as per drawing and M.O.R.D. technical specification clause 1203 and section 1604 , as per direction of Engineer-In-Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect. The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing , laying and spreading soil on a prepared sub-grade, pulverising, adding the designed quantity of cement to the spread soil , mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and form a layer of sub-base/base as per M.O.R.D. Technical specifications clause 404, as per the entire satisfaction and direction of Engineer-in-Charge within all leads, lifts and other incidental .The rate is including royality, Malkana,Tol tax or other taxes imposed by the Government excluding GST.
Construction of granular sub-base by providing well graded material mixing in a mechanical mix plant and carriage of mixed material to site of work in all leads and layers in uniform layers with motor grader and compacting with smooth wheel 80-100( eighty -hundred) KN static roller to achieve the desired density, complete as per M.O.R.D. Technical specifications clause 401 for grading -I material, as per the entire satisfaction and direction of Engineer-in-Charge within all leads, lifts and other incidental .The rate is including royality, Malkana,Tol tax or other taxes imposed by the Government excluding GST.
Providing, laying, spreading by manual / mechanical means and compacting to 75mm (seventy five millimetre) compacted thickness, graded, broken / crushed stone aggregate, for grading-II, 63mm to 45 mm (sixty three millimetre to forty five millimetre) nominal size to water bound Macadam, specification including spreading in uniform thickness using template, hand packing rolling with three wheel 80-100 (eighty - hundred) KN static roller in stages to proper grade and camber including applying and brooming with screening of type-B size 11.2 mm (eleven point two millimetre) nominal size at the rate of 0.20 cum (zero point twenty cubic metre) per ten square metre and binding material at the rate of 0.06 cum ( zero point zero six cubic metre ) to fill up the interstoces of coarse aggregate , watering and compacting to the required density as per MORD technical specifications clause 405 or as directed by the Engineer-In-Charge including carriage of materials within all leads, lifts and other incidentals. The rate includes octroi, royality, Malkhana, toll tax or other taxes imposed by the Govenment excluding GST.
Providing , laying , spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (pug Mill) , carriage of mixed material by tipper to site , laying in uniform layers in sub-base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100 (eighty to hundred) KN weight to achieve the desired density including lighting, barricading and maintenance of diversion etecetra as per Tables 400.11 and 400.12 and Technical clause 406 as per the entire satisfaction and direction of Engineer-in-Charge within all leads, lifts and other incidental .The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing, laying, spreading and compacting mechanical means and compacting to 75mm (seventy five millimetre) compacted thickness, graded, broken / crushed stone aggregate, for grading-III, 53mm to 22.4 mm (fifty three millimetre to twenty two point four millimetre) nominal size to water bound Macadam, specification including spreading in uniform thickness using template, hand packing rolling with three wheel 80-100 (eighty - hundred) KN static roller in stages to proper grade and camber including applying and brooming with screening type -B of size 11.2 mm (eleven point two millimetre) nominal size at the rate of 0.18 cum (zero eighteen cubic metre) per ten square metre and binding material at the rate of 0.06 cum ( zero point zero six cubic metre ) to fill up the interstoces of coarse aggregate , watering and compacting to the required density as per MORD technical specifications clause 405 or as directed by the Engineer-In-Charge including carriage of materials within all leads, lifts and other incidentals. The rate includes octroi, royality, Malkhana, toll tax, or other taxes imposed by the Govenment excluding GST.
Providing and applying primer coat with bitumen emulsion (SS-I) slow setting-I with Nano technology-Tera prime on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer @ 0.85 Kg. ( zero point Eight Five kilogram)) per square meter of road surface using bitumen emulsion pressure distributor complete, as per MORD technical specifications clause 502 or as directed by the Engineer-In-Charge including carriage of materials within all leads, lifts and other incidentials. The rate includes octroi, royality, Malkhana, toll tax, or other taxes imposed by the Govenment excluding GST.
Providing and applying tack coat with Bitument emulsion (RS-I) with Nano technology-Nano tac on prepared surface of granular base including cleaning road surface and spraying primer at the rate of 0.250 (zero point two five zero) kilogram per square metre as per M.O.R.D. technical specifications section 502 and to the entire satisfaction of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect. The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing and laying bitumenous macadam with hot mix plant mixed with nano technology using crushed aggregate of grading as per Table 500.4 premixed with bitumenous binder @ 3.3% of mix transported to site upto a lead anuy lead and lift laid over a prevously prepared surface with paver finisher to the required grade, level and alignmemnt and rolled to achieve the desired compaction as per Technical Specification Clause 504 and to the entire satisfaction of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect. The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing and laying semidense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 (seventy five) tonnes per hour with nano technology @ 0.1% of binder using crushed aggregates of specified grading, premixed with bituminous [email protected]% to 5% (four point five to five percent ) of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignmernt , rolling with smooth wheel , vibratory and tandem rollers to achieve the desired compaction as per MORD specification clause No 509 complete in all respect and to the entire satisfaction of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect. The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Scarifying the existing bituminous road surface to a depth 0f 150 mm (one hundred fifty millimetre) and disposal of scarified material with a lift upto any leads and as per Technical Specification Clause 301.40 and to the entire satisfaction of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect. The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub-base, with 43 (forty three)grade cement or any other type as per clause 1501 m-30 (M-thirty) (Grade) coarse and fine aggregate confirming to IS:383 maximum size of coarse aggregate not exceeding 25 mm (twenty five millimetre) , mixed in a concrete mixer of not less than 0.20 (zero point two) cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel), laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the form work as per drawing, spreading the concrete with shovels, rakes, co0mpacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips,primer, sealant, dowel bars etcetrand as per directions of Engineer - in- Charge. Including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect. The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing and laying of cold applied plastic paint on bituminous Surface, the finished surface to be level, uniform and free from streaks and holes, including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect. The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing and laying of interlocking concrete block pavement having thickness 80 mm (eighty millimetre) as per drawing and Technical Specifications clause 1504 as per the entire satisfaction and direction of Engineer-in-Charge within all leads, lifts and other incidental .The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing and laying mechanically mixed and vibrated plain cement concrete in foundation and plinth, as per drawing and technical specificationi section 800, 900 & 1200 for nominal mix 1: 4: 8 (one cement: four sand : eight graded crushed stone aggregate 40mm (forty millimeters) nominal size and curing complete, including the cost of form work in Retaining Wall, Breast Wall etcetera, complete as per the direction of Engineer-in-Charge and as per the drawing and hauling /carriage of labour, equippments and materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect.The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing weep holes in brick masonry/stone masonry/plain or reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimeter) dia P.V.C. pipe extending through the full width of the structures with slope of I (v): 20(H) towards drainage face complete as per drawing and MORD technical specification clauses 1206.6 including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect and as per the direction of Engineer-In-Charge.The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing and laying mechanically mixed and vibrated concrete for plain/ cement concrete in open foundation for all type of structure complete using plain cement concrete in drains and retaining walls nominal mix 1:3:6 (one cement is to three sand is to six crushed stone aggregate 40mm(forty millimetre) nominal size) in or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200.and to the entire satisfaction and direction of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect.The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing and laying mechanically mixed and vibrated concrete in super structure for grade M15 (M-fifteen) design mix with cement contents not less than 275 kg (two hundred seventy five kilogram) per cubic metre and using graded/ crushed stone aggregate 40 mm (forty millimetre) nominal size and curing complete including cost of form work for plain concrete work in Abutments, head walls, parapets and other structures and the like as per drawings and M.O.R.D. technical specification Clauses 800,900, and 1200 as directed by the Engineer-in-Charge including hauling/carriage of materials to various location through all modes of transportation in all leads ,lifts and other incidentals. The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing and laying 150 mm ( one hundred fifty millimetre) thick rubble stones flooring , in cement mortar 1:3 ( one cement isto three sand) laid over cement concrete bedding fifteen centimetre thick of M-10( M ten) grade concrete (cost of concrete included but measuremen will be taken of stone thickness only for working out cubical contents for pavement) complete as per drawing and MORD technical specifications for rural roads clause 1303 including form work and hauling of materials in all leads and lifts and other incidental. The rate including Octroi, Royality, Malkana, Toll Tax, or other taxes imposed by the Government excluding GST.
Providing and laying of boulder apron laid in wire crates with 4 mm (four millimetre diametre) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10 (ten) per cent extra for laps and joints laid with stone boulders weighing not less than 40 kg (forty kilogram) each as per drawing and technical specifications Clause 1301. including leads, lifts and other incidental complete in all respect including hauling /carriage of materials to various location through all modes of transportation in and as per the direction of Engineer-In-Charge.The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing and erecting "W" metal beam crash barrier comprising of 3 mm (three millimetre) thick corrugated sheet metal beam rail, 70 (seventy) centimetres above road/ground level, fixed on ISMC series Channel vertical post 150x75x5 mm ( one hundred fifty into seventy five into five millimetre) spaced 2.00 (two) metre centre to centre , 1.80 ( one decimal eight ) metre high, 1.10 ( one decimal one) metre below ground/ road level all steel part and fitments to be galvenised by hot dip process, all fitting to confirm to IS: 1367 and IS 1364 metal beam rail to be fixed on vertical with a spacer of channel section 150x75x5mm (one hundred fifty into seventy five into five millimetre) , 330 mm ( three hundred thirty millimatre) long complete as per clause 810 as per direction of Engineer-in-Charge including hauling /carriage of materials to various location through all modes of transportation in and as per the direction of Engineer-In-Charge.The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing , supplying , fitting and placing HYSD bar reinforcement (Fe-415) in sub-structure complete as per drawing and MORD technical specification section 1000 and 1200 including cutting, bending , binding and placing in position complete in all respect including cost of binding wire upto any leads and lift and other incidental. The rate including Octroi, Royality, Malkana, Toll Tax, or other taxs imposed by the Government excluding GST.
Providing , supplying , fitting and placing HYSD bar reinforcement (Fe-415) in superstructure complete as per drawing and MORD technical specification section 1000 and 1400 including cutting, bending , binding and placing in position complete in all respect including cost of binding wire upto any leads and lift and other incidental. The rate including Octroi, Royality, Malkana, Toll Tax, or other taxs imposed by the Government excluding GST.
Providing and laying mechanically mixed and vibrated cement concrete in sub structure for reinforced concrete M-20 (M-twenty ) design mix with cement contents not less than 330 kg (three hundred thirty kilogram ) per cubic metre and using graded / crushed stone aggregate 20 mm (twenty millimetre) nominal size , and curing complete including cost of form work but excluding the cost of reinforcement for reinforced concrete work in bed block , etcetra as per drawings and M.O.R.D. technical specification Clauses 800,900, and 1200 as directed by the Engineer-in-Charge including hauling/carriage of materials to various location through all modes of transportation in all leads ,lifts and other incidentals. The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing and laying mechanically mixed and vibrated cement concrete in sub-structure/ open foundation for cement concrete M-20 (M-twenty ) design mix with cement contents not less than 330 kg (three hundred thirty kilogram ) per cubic metre and using graded / crushed stone aggregate 20 mm (twenty millimetre) nominal size , and curing complete including cost of form work but excluding the cost of reinforcement for reinforced concrete work in abutment of culvert etcetra as per drawings and M.O.R.D. technical specification Clauses 800,900, and 1200 as directed by the Engineer-in-Charge including hauling/carriage of materials to various location through all modes of transportation in all leads ,lifts and other incidentals. The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing and laying mechanically mixed and vibrated cement concrete in super structure for cement concrete M-25 (M-twenty five) design mix with cement contents not less than 400 (four hundred ) kilogram per cubic metre and using graded / crushed stone aggregate 20 mm (twenty millimetre) nominal size and curing complete including the cost of form work but excluding cost of reinforcement for rainforced concrete work in deck slab, etc. as per drawing and MORD technical specification clause 800, 900 and 1400 Including carriage of materials within all lead, lifts and other incidental. The rate including Octroi, Royality, Malkana, Toll Tax, or other taxs imposed by the Government excluding GST.
Providing and laying mechanically mixed and vibrated reinforced concrete cement in super structure grade M-30 (M- thirty) (wearing coat) designed mix with cement concrete of 430 Kg (four hundred thirty kilogram) per cubic metre with 20mm (twenty millimetre) nominal size graded crushed stone aggregate and curing complete in wearing coat including cost of form work and reinforcement complete as per as per drawing and MORD technical specification section 800,900 and 1000, including carriage of materials within all lead, lifts and other incidental. The rate including Octroi, Royality, Malkana, Toll Tax, or other taxes imposed by the Government excluding GST.
Providing and fixing of typical PMGSY informatory sign board with logo as per M.O.R.D. specification and drawing . Three MS plates of 1.6 mm ( one point six millimeter) thick top and middle plate duly welded with MS flat iron 25mmx5mm ( twenty five millimeters into five millimeters) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm (twenty five millimeter into twenty five millimetre into five millimeter). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. ( Two Nos.) 75mmx75mm (seventy five millimeter into seventy five millimeters) of 12 SWG ( twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 ( M fifteen) grade blocks of 450mmx450mmx600mm ( four hundred fifty millimeters into four hundred fifty millimeters into six hundred millimeters), 600mm ( six hundred millimeters) below ground level. The top most diamond plate will be welded to middle plate by 47mmx47mm ( forty seven millimeter into forty seven millimeters) of 12 SWG ( twelve standard wire gauge) steel plate tube. All MS will be stove enameled on both sides. Lettering and printing, arrows, borders etcetera will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and M.O.R.D. technical specifications section 1700 and Annexture 1700.1 including hauling/ carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete and as per direction of Engineer-In-Charge.The rate is including royality, Malkana,Tol tax, or other taxes imposed by the Government excluding GST.
Providing reinforced cement concrete M-15 grade nominal mix 1:2 ½: 5 (one cement: two & half sand :five graded crushed/broken stone aggregate 40mm nominal size curing complete kilometer stone/local stone stranded design as per IRC;8 (eight fixing in position including painting and printing etc as per drawing and MORD technical specification clause 1703 including mechanically mixed and vibrated 5th kilometer including carriage of material within all leads, lift and other incidental the entire satisfaction and direction of Engineer-in-charge. The rate including Octroi, Royality, Malkana, Toll Tax, or other taxs imposed by the Government excluding GST.
Providing reinforced cement concrete M-15 grade nominal mix 1:2 ½: 5 (one cement: two & half sand :five graded crushed/broken stone aggregate 40mm nominal size curing complete ordinary kilometer stone/local stone stranded design as per IRC;8 (eight ) fixing in position including painting and printing etc as per drawing and MORD technical specification clause 1703 including mechanically mixed and vibrated ordinary kilometer stone precast including carriage of material within all leads, lift and other incidental the entire satisfaction and direction of Engineer-in-charge. The rate including Octroi, Royality, Malkana, Toll Tax, or other taxs imposed by the Government excluding GST.
Providing reinforced cement concrete M-15 grade nominal mix 1:2 ½: 5 (one cement: two & half sand :five graded crushed/broken stone aggregate 40mm nominal size curing complete 200 metre (two hundred ) stone/local stone stranded design as per IRC;8 (eight ) fixing in position including painting and printing etc as per drawing and MORD technical specification clause 1703 including mechanically mixed and vibrated ordinary kilometer stone precast including carriage of material within all leads, lift and other incidental the entire satisfaction and direction of Engineer-in-charge. The rate including Octroi, Royality, Malkana, Toll Tax, or other taxes imposed by the Government excluding GST.
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 600 (Six hundred) millimeter equilateral triangle as per IRC:67 made of 1.5 mm(One decimal Five millimeter) thick MS sheet duly stove enamel white colour in front and gray colour on back with red reflective border of 65 mm (Sixty Five millimeter) width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mm x 47mm x12(Forty seven into forty seven into twelve) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450 x450 x 600 mm, (Four Hundred Fifty into Four Hundred fifty into Six Hundred millimeter), 600 mm (six Hundred millimeter) below ground level as per approved drawing and MORD technical specification section 1700 including hauling/ carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete and as per direction of Engineer-In-Charge. The rate including Octroi, Royality, Malkana, Toll Tax, or other taxes imposed by the Government excluding GST.
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 600 (Six hundred) millimeter Circular as per IRC:67 made of 1.5 mm(One decimal Five millimeter) thick MS sheet duly stove enamel white colour in front and gray colour on back with red reflective border of 65 mm (Sixty Five millimeter) width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mm x 47mm x12(Forty seven into forty seven into twelve) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450 x450 x 600 mm, (Four Hundred Fifty into Four Hundred fifty into Six Hundred millimeter), 600 mm (six Hundred millimeter) below ground level as per approved drawing and MORD technical specification section 1700 including hauling/ carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete and as per direction of Engineer-In-Charge.The rate including Octroi, Royality, Malkana, Toll Tax, or other taxes imposed by the Government excluding GST.
Providing and erecting direction and place identification semi -reflectorised sign exceeding 0.90 sqm area as per IRC-67 made of 2 mm (two millimetre) thick M.S. sheet duly stove enameled paint in white in white colour in front and grey colour on back with red reflective border of 70 mm (seventy millimetre) width and required message , letters, figures with reflective engineering grade tape as per MORD specifications of required ashade and colour , supported and welded on47mmx47mm (forty seven millimetre into forty seven millimetre) of 12 (twelve) SWG square tube of 3050 mm (three thousand fifty millimetre) height duly strengthened by 25mmx5mm (twenty five millimetre into five millimetre) M.S. flat iron on edge on back firmly fixed to the ground by means of properly designed foundations with with M-15 grade nominal mix 1: 2 1/2 : 5 [ one cement : two and half sand : five graded crushed stone aggregate 40mm (forty millimetre) nominal size cement concrete 450x450x600mm (four hundred fifty into four hundresd fifty into six hundred , 600mm (six hundred millimetre) below ground level as per approved drawings and technical specification section 1701.2.2, including painting angle iron post with primer and two coats of epoxy paint as per specification and as per the direction of Engineer-In-Charge. Including carriage of material within all leads, lifts and other incidentals. The rate includes, octroi, royality, Malkhana, toll tax, or other taxes imposed by the Govenment excluding GST.
Providing and erecting direction and place identification semi -reflectorised sign as per IRC-67 made of 2 mm (two millimetre) thick M.S. sheet duly stove enameled paint in white in white colour in front and grey colour on back with red reflective border of 70 mm (seventy millimetre) width and required message , letters, figures with reflective engineering grade tape as per MORD specifications of required ashade and colour , supported and welded on47mmx47mm (forty seven millimetre into forty seven millimetre) of 12 (twelve) SWG square tube of 3050 mm (three thousand fifty millimetre) height duly strengthened by 25mmx5mm (twenty five millimetre into five millimetre) M.S. flat iron on edge on back firmly fixed to the ground by means of properly designed foundations with with M-15 grade nominal mix 1: 2 1/2 : 5 [ one cement : two and half sand : five graded crushed stone aggregate 40mm (forty millimetre) nominal size cement concrete 450x450x600mm (four hundred fifty into four hundresd fifty into six hundred , 600mm (six hundred millimetre) below ground level as per approved drawings and technical specification section 1701, including painting angle iron post with primer and two coats of epoxy paint as per specification and as per the direction of Engineer-In-Charge. Including carriage of material within all leads, lifts and other incidentals. The rate includes, octroi, royality, Malkhana, toll tax, or other taxes imposed by the Govenment excluding GST. (Maintenance Board)
Providing and fixing guard stone on curve made of reinforced cement concrete M-15 , local stone of standard design as per IRC:25 fixed in position including finishing and lettering but excluding painting as per drawing and Technical specification clause 1704 including mechanically mixed and vibrated ordinary kilometer stone precast including carriage of material within all leads, lift and other incidental the entire satisfaction and direction of Engineer-in-charge. The rate including Octroi, Royality, Malkana, Toll Tax, or other taxs imposed by the Government excluding GST.
Providing and fixing pavement (cat eyes) made out of ABC 3 m(three metre) plastic of size 128x110x29.5 mm ( one hundred twenty eight into one hundred ten into twenty nine point five millimetre) without nail having 50 mm (fifty millimetre) stem of ABS. THe pavement marker shall be installed with epoxy ABS including carriage of materials and equipment with all mode of transportationand as per direction of Engineer-in-Charge.Including carriage of material within all leads, lift and other incidental the entire satisfaction and direction of Engineer-in-charge. The rate including Octroi, Royality, Malkana, Toll Tax, or other taxs imposed by the Government excluding GST.
Providing and fixing road side delineators of height 600 mm (six hundred millimetre) made of MS pipe of size 50 mm (fifty millimetre) of 1.6 (one decimal six ) SWG having high intensity micro prismatic reflective sheeting confirming to ASTM type-XI upto 300 mm ( three hundred millimetre) . It shall be painted with synthetic enamel paint of alternate colour black and white strips. It shall be fixed with 30x30x30Cm (thirty into thirty into thirty millimetre centimetre) block with cement concrete 1:2:4 ( one cement isto two sand isto four aggregate 20mm (twenty millimetre) nominal size complete in all respect and as per direction of Engineer-in-Charge.Including carriage of material within all leads, lift and other incidental the entire satisfaction and direction of Engineer-in-charge. The rate including Octroi, Royality, Malkana, Toll Tax, or other taxs imposed by the Government excluding GST.
Painting line , dashes arrows etc. on roads in two coats on new work with ready mixed road marking paint confirming to IS :164 on bituminous/ concrete surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and MORD technical specification clause 1702 as per approved drawing including carriage of material to various location through all modes of transportation within all leads, lifts and other incidential complete and as per direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax, or other taxs imposed by the Government excluding GST.
Collection of hard wood cutting from appropriate approved species, from sources within all leads of the road , including trimming the stems and making the cutting , and transporting while wrapped in damp material,through all modes of transportation within all leads, lifts and other incidential complete and as per direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax, or other taxs imposed by the Government excluding GST.
Planting unrooted hard wood cuttings (2.0 m (two metre) in length and 3.00 to 8.00 (three to eight) centimetre in diametre of appropriate approved species on slopes, including final preparation of cuttings, preparing lines, digging trenches to specified dimensions and forming fascines , through all modes of transportation within all leads, lifts and other incidential complete as per MORD specification section 1600 and as per direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax, or other taxs imposed by the Government excluding GST.
Road side tree planting contained tree and shurbs including potting ,transportation , compacting and mulching on slopes 30 (thirty) degree to 60 (sixty ) pits size 30 cm (thirty centimetre) deoth . Providing and mixing compost with soil,provisioning and applying of pesticides of required including labour and transportation to the site ,within all leads, lifts and other incidential complete as per MORD specification section 1600 and as per direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax, or other taxs imposed by the Government excluding GST.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.48 MB
Tendernotice_2.pdf
PDF • 0.35 MB
Biddocument.pdf
Tender Documents • 0.58 MB
BOQ_153318.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .