Work of Supply and Fixing of UV protected Multicell Polycarbonate sheeting work at New Terminal Building at Dr. Babasaheb Ambedkar International Airport, Nagpur.

Amount

Supply of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 mm thick of 900 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends` supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 6mm thick panels shall be used for a roofing height of upto 15 mtrs

Providing & Fixing for Polycarbonate roofing, ridge and flashing to prevent water seepage through joint with 0.5mm PPGI ( Pre- Painted Galvanised Iron) sheet with SDS (Self drilling screws) SDS Reviting and sealing it with silicion sealent ( 789 - Dowcoring) with labour etc complete.

Supply and Installation of 3mm of solid polycarbonate panel sheets. The system with complete assembly of co extruded UV protected solid panels incorporated into a complete system, Co-extruded UV protected polycarbonate panel system of min 3 mm thick of 900 mm (min.) width with angular daylighting concept. including all necessary fitting such as aluminium strips etc complete. ( Prior approval of sample is necessary before use)

Supply and Installation of 6mm thick multicell polycarbonate panel sheets. The system with complete assembly of co extruded UV protected solid panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 6 mm thick of 1200 mm (min.) width with angular daylighting concept. including all necessary fitting etc complete. ( Prior approval of sample is necessary before use)

Removing of 12 mm thick multicell Polycarbonate sheeting work in existing dome Structructure.

RAJESH RAMYARE SINGH THAKUR