CERTAIN REPAIR TO PQC PCC ROAD AT VARIOUS PLACES OF ITR TECH AREA, LAUNCH COMPLEX, OP 16 TOWARD OP 19 OF ITR CHANDIPUR UNDER AGE BR II CHANDIPUR

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.

M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L for PCC 1:4:8 type D 2 (40 mm graded aggregate as subbase concrete in foundations, filling and mass concrete

M & L Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre or as per design mix, thickness of concrete 25 cm or less complete all as specified and directed by Engr-in-charge

Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A'

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A'

M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.

Scarifying or picking graveled or bituminous macadam surface in area n.exc 400 Sqm and depth n.exc 100mm removing material and stacking complete all as specified.

Water bound macadam, 7.5 cm thick (compacted thickness) with broken stone aggregate of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size) (Granite, Trap or Basalt) spread rolled with 8 to 10 ton power roller and consolidating to required gradient and camber complete all as specified and as directed.

Repairs to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm depth,making good by filling in screened & graded road metal , watering and well ramming (including supply of road metal) complete all as specified and directed.

Preparation of unsurfaced WBM by brushing with wire brushes form removing caked, mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming tack coat with bituminous primer at 10 kg/10 Sqm

Preparation of Black top surfaces by brushing with wire brushes form removing caked, mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming tack coat with bituminous primer at 5 kg/10 Sqm

Providing and laying 40mm thick (Consolidated thickness) bituminous premix semi dense asphaltic concrete (SDAC) with 5.5% binder content (VG-30) by weight of total mix, shall be hot mix plant and laid by mechanical paver rolled and compacted to required camber and gradient by 8-12 ton vibrating (Tendom) roller complete all as specified and directed by Engr-in-Charge

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

R.B.Construction

MS BEHERA SANITARY AND HARDWARE

M/S T.N.CONSTRUCTION

Bansal And Co

ELECTRO COMMERCIAL CO

RANA ENTERPRISES

M/SNeelachal Enterprises

Bidder Name

RANA ENTERPRISES

Bansal And Co

R.B.Construction

M/S T.N.CONSTRUCTION

ELECTRO COMMERCIAL CO

MS BEHERA SANITARY AND HARDWARE

M/SNeelachal Enterprises

MS SUBHAM ENGINEERING AND CO