Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹50.7 L
EMD Value
₹1.0 L
Closing Date
25 Nov 2025, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Krishna Bhagya Jala Nigam Limited
Manjunath Nagaral
Supplying And Installing Delivery pipe ,Overhauling Serviceing of Non-Return Valve Dia 900 mm And Butterfly Valve of Dia 900 mm and installing Flot Valve and necessary spares of two number of Surge tank at 1st stage headwork of Ramthal (Marol) LIS.
KBJNL/2024-25/OW/WORK_INDENT1553/CALL-4
KBJNL/2024-25/OW/WORK_INDENT1553/CALL-4
Open
Other Works
Two Tender Document System(Two Cover)
KBJNL Division ARBC Division Hunagunda
8 documents required · 8 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work Such as Supply and installing Delivery pipe, Overhauling servicing of Non return valve Dia 900 mm And Butterfly valve of Dia 900mm and supply and installing float valve and necessary spare parts of two number of suge tank value not less than Rs.23.35 Lakhs. (Usually not less than 50% Estimated Value of Contract) (Updated to the FY in which the tender are invited. The value of the completed works shall be given weightage of 10% per year to bring them to the price level of FY in which the tenders are invited and The necessary work done certificate issued by an officer not below the rank of Executive Engineer / Equivalent officer of the concerned division).
Executed in any one year, (for a continuous period of 12 months ) the minimum quantities of work : (usually 50% of the annual requirement. (1) Repair and servicing of 900mm dia Butterfly valve 2. (2)Repair and servicing of 900mm dia Non-return valve 2.
Liquid assets and /or availability of credit facilities of not less than Rs. 15.21 lakhs from any Nationalized / scheduled bank. (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. usually 30% of the amount of contract)
Eligible Tenderers will be qualified only if their available tender capacity is more than total tender value.The available tender capacity will be calculated as under: Assessed available tender capacity IS Ax Nx 2.5-B where,A is Maximum value of civil engineering works executed in any one year during the last five years at 2024-25 price level updated to the Financial year in which the tender is invited taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which Tenders are invited.B is Value, at 2024-25 price level updated to the Financial year in which the tender is invited of existing commitments and on going works to be completed during the next 6 months
A copy of the valid Registration certificate of CEIG registered class-1 contractor licence.
The Earnest money deposit (EMD) in E cash.
Copy of Valid Employees Provident Fund Registration Certificate.
Copy of Valid GST Registration Certificate.
To qualify for award of this contract, each tenderer in his name should have in the last five years period. i.e., 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24 (a) Achieved in at least TWO financial years an average annual financial turnover (in all Electrical and mechanical works only ) of Rs. 50.71 Lakhs. (Usually not less than the estimated annual payment under this contract) (Updated to the FY in which the tenders are invited.Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the financial year in which the tenders are invited). (The Turnover certificate issued by registered chartered Accountants along with UDIN)
₹1,270
₹1.0 L
17 Nov 2025
17 Nov 2025
27 Nov 2025
24 Nov 2025
Supplying And Installing Delivery pipe ,Overhauling Serviceing of Non-Return Valve Dia 900 mm And Butterfly Valve of Dia 900 mm and installing Flot Valve and necessary spares of two number of Surge tank at 1st stage headwork of Ramthal (Marol) LIS.
Dismantling, Transportation, Repairs And Replacement of disk plate ,hinge pin, Body seat ring, Disc Seat ring ,SS spring And bearings Stud Road And SS fasteners Assembling and Erecting of 900 mm Dia...
Dismantling, Transportation, Repairs And Replacement of Single Door plate ,Retaining ring Drive stub shaft Tail stub Shaft Shaft Bearing Shaft seal Body seat Disc seal And Suitable SS fasteners ...
Supplying And Fixing New Flot valve 350 mm Dia @ surge tank As per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supplying of Guide Bearing for Flor more pump As per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supplying of Coupling Bolt set for Flor more pumps As per specification With All Lead and Lift As directed by the Engineer incharge of the work
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever ne...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per d...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification A granular material With All Lead and Lift As directed by the Engineer...
Providing, fitting and fixing mild steel railing complete as per drawing and Technical Specification With All Lead and Lift As directed by the Engineer in charge of the work
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) conf...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) delivery pipes of specif...
Supplying of oil for pumps As per specification With All Lead and Lift As directed by the Engineer in charge of the work
Supplying of grease Gem-RR3 for pumps As per specification With All Lead and Lift As directed by the Engineer in charge of the work
Supplying of Caution/Danger Board As per specification With All Lead and Lift As directed by the Engineer in charge of the work
Supplying of Silica gel As per specification With All Lead and Lift As directed by the Engineer in charge of the work
Supplying of Safety shoes with Two Pair of socks As per specification With All Lead and Lift As directed by the Engineer in charge of the work
Supplying of Cotton Waste As per specification With All Lead and Lift As directed by the Engineer in charge of the work
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm ...
Fabrication,Supplying,Erection,Testingand Commissioning of 12 m/12.5 m - Top 100 mm and Bottom 310 mm dia ms long Polygon highmast with Single/Multipletelescopicsections having, (minimum overlap dis...
Supply of LED floodlight luminaire with pressure diecast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly ca...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW 3 dtp 1553...60lakhs general.doc
Tender Document • 2.12 MB
Specification-NRV All dia onstallation and all manual.pdf
Tender Document • 1.97 MB
Specification-1.pdf
Tender Document • 10.01 MB
specification-NRV.pdf
Tender Document • 4.01 MB
Canal works specifications.pdf
Tender Document • 45.96 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .