SPECIAL REPAIRS TO PATIENT MESS COOK HOUSE AND CERTAIN SANCTIONED MINOR WORKS AT CHAF BANGALORE

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth and getting out in soft /loose soil for laying of cable all as specified and directed and as directed.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation in hard/ dense soil and getting out etc complete all as specified and directed.

Returning filling in including spreading, levelling , watering and well ramming n exc. 25 cm in layers (Soil) etc complete all as specified and directed.

Excavation in post holes each n. exc 0.50Cum in any type of soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around , in layers not exceeding 25 cm ,watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

M & L River sand, spread dry in trenches as in cable cushioning all as specified and as directed.

Removal of surplus soil (excavated soil) to a distance not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed.

M&L for cement concrete in foundation PCC 1:4:8 type D2 using 40mm graded stone agg as in foundation filling or mass concrete for fencing post etc complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in surface channel, drain, etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as filled in pressed steel foor frames etc complete all as specified and as directed.

M&L for providing, cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in roof kerbs, padding or mud stops, rounded or chamfered on edges all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.

M&L for Pre cast cement concrete block masonry with soild blocks, type C1 (1:3:6) using 20mm graded aggregate exc 10 cm in width and setting in cement mortar (1:6) etc complete all as specified and directed.

M&L for pre-cast cement concrete (reinforced )slab type B-1, 1:2:4 using 20mm graded aggregates as in manholes cover/ slab covers set in cement mortar 1: 4.including necessary form work etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

Supply only liquid water proofing compound

Cutting chasis, pinning in Stone walls/ brick walls etc. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc, for concealed conduit wiring a into or through the stone walls built in cement mortar or cement lime mortar and walls of cement concrete suitable for housing 25mm dia conduit pipe using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.

Cutting into or through the stone walls / brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.

M&L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and table top for fixing wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes all as specified and as directed by Engr-in-charge.

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats, etc complete all as specified and directed.

S&F for 35 mm thick factory made second class hard wood plain framed panelled shutter ( two panel) with lock rail and panel of 9mm B.W.P. commecrcial ply or 12mm veneered particle board with commecrcial veneering on both face. The size of rail and stile as per IS 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n.exe 1.50 Sqm each etc complete all as specified and directed.

Taking down chowkhat or frames with shutters exc 1.5 sqm but n exc 4 sqm each (w/o taking of shutters from the frame) etc complete all as specified and directed.

Taking down shutter of any description exc 1.00 sqm but n/exe 2.00 sqm each etc complete all as specified and directed.

S&F for 200mm long Aluminium, anodised, barrel tower bolts of extruded section etc complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, etc complete all as specified and directed.

S&F for butt hinges 100mm medium weight cold rolled mild steel etc complete all as specified and directed.

S&F 300mm, ordinary rat tailrod pattern springs including roller and roller plate etc complete all as specified and directed.

S&F 200 mm long Extruded Aluminium alloy handles, fabricated type, anodised etc complete all as specified and directed.

S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F framed work such as grills, gratings etc, with ends of bars, shouldered, end or riveted or forged into spikes framed gaured bars barrel iron doors ladders, framed blausters walk ways,raillings,framed water tanks and similar works confirming to Fe Fe 290 Gde-E-165 etc complete all as specified and directed.

S&F mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-290 Gde-E-165 etc complete all as specified and directed.

S & F 1.60 mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M & L 10 mm dia and over high deformed TMT bar cut to length, bend to shape required incl cranking bending & hooking ends & binding with MS wire annealed n. less 0.9mm dia etc complete all as specified and directed.

S & F MS rolled plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde E- 250) quality A complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plate, rails braces etc, complee drilling for fixing of steel sheeting,hanging, fastering and fixing etc complete all as specified and directed.

S & F MS rolled structural Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161 -1979 grade St.-240 complete all as specified and directed.

S&F steel window/ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and with glazing bars complete with dovetailed or welded etc complete all as specified and directed.

S&F steel window/ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and but without glazing bars suitable for fixing of gauze all as specified with dovetailed or weldedall etc complete all as specified and directed.

S&F Pressed steel frames for doors size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified and directed

S&F Pressed steel frames for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for 8 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements) etc complete all as specified and directed.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) etc complete all as specified and directed.

Taking down pipes of any description fixed to wall or laid under floor etc complete all as specified and directed.

M&L for water proofing treatment on horizontal and vertical surfaces with Providing and laying / fixing TPO (Thermoplastic Polyolefin) membraneincl Cleaning the surface and laying of 200 GSM Geo textile and cover up with TPO RF 1.2 mm thermoplastic membrane on roof & up to 300 mm of parapets and crumple joint including junction of roof and parapet, welding the seam joints with hot air gun/machine and terminate the corners with extra protection to bear the high wind pressure. The TPO should be thoughroly tightened with the lower structure using mechanical fastening properly to avoid the corners and seam joint failure etc complete all as specified and directed. Make :Asian paints TPO or equivalent product of M/s Bauchemic/CIPY/SIKA/Pidilite/Dr fixit TO membrane

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed bed or bedding 20mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar with and including 10 mm thick backing coat of cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as floors and pavings Finishing cement concrete surface even and smooth Without using cement extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub base etc complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 350 x250x7/450x350x7 mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick cement plaster in cm (1:4) etc complete all as specified and directed.

M&L for chequerd cement concrete tiles glossy finished 30cm x30cmx25mm th with grey cement and pigment , set , jointed and pointed in neat cement slurry in floors laid over 15 mm thick screed bed in cm 1:6 etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete etc complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 on roof padding finished even and fair with approved water proofing compound @ 200ml per 50kg of cement or as per manufacturer's instruction etc complete all as specified and directed. (Note : WPC shall be measured and paid separately as supply only under relevent item)

M&L for rendering rendering 10mm thick in cement morter 1:6 and 5mm thick in cement morter 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement etc complete all as specified and directed. (Note : WPC shall be measured and paid separately as supply only under relevent item)

M&L for rendering 5mm thick on concrete surfaces of ceiling in cement morter 1:3 finished even and smooth without using extra cement.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of white wash etc complete all as specified and as directed.

Material and labour for applying one coat of white wash to old treated plastered or un-plastered surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots) etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying two coat of white wash etc complete all as specified and as directed.

Material and labour for applying one coat of white wash to old treated plastered or un-plastered surfaces of ceilling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots) etc complete all as specified and as directed by the Engineer-in-Charge.

M &L for preparing newly plastered or un plastered surface of walls and applying two coats of Cement base paint on walls a coat of chalk primer through mechanical means complete all as specified and directed.

M &L for preparing old plastered or un plastered surface of walls and applying two coats of Cement base paint on walls through mechanical means complete all as specified and directed.

M&L for applying 2 mm thick wall care putty on wall including preparation of old /new plastered or unplastered surfaces , etc complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primig paint through mechanical means etc complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on NEW WOODEN surfaces over coat of pink primer including preparation of new wooden surfaces, over 10cm width or girth etc complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on NEW STEEL surfaces over coat of red-oxide primer including preparation of new steel surfaces, over 10cm width or girth etc complete all as specified and as directed.

S&F for 4mm thick sheet glass ordinary quality and fixed with aluminium beading in square not exc. 0.50 sqm in each pane complete all as specified and as directed.

S&F for 4mm thick Figured glass, pin head type and fixed with aluminium beading in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

Supply and Fix GI tubing light grade 50 mm bore as in cable protection fixed to poles/walls or laid intrenches/under road crossing etc all as specified and as directed.

S&F 15 mm bore GI tubing med grade galvanished with all fittings and fixed complete to walls & floors etc complete all as specified and as directed.

S&F 20 mm bore GI tubing med grade galvanished with all fittings and fixed complete to walls & floors etc complete all as specified and as directed.

Taking up or down 15mm d ia GI Tubing and connections including cleaning for refixing or removal to store etc complete all as specified and as directed.

Taking up or down 20 mm d ia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.

Dismantling water storage tanks of any description,exc 1000 & n.exc 2000 litres capacity and removing from site etc complete all as specified and as directed.

S&F for Rotational moulded polythylene 2000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position etc complete all as specified and as directed.

S&F in repairs 15 mm bore fancy type CP bib taps cast copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe etc complete all as specified and as directed.

S&F in repair Ball valve high pressure of PTMT with epoxy coated aluminium rod and highdensity plastic ball screwed for 20mm dia iron pipe and fixed (minimum wieght 15mm-142gms/20mm 210gms/25mm 455gms/40mm 690gms etc complete all as specified and as directed.

S&F 20mm connection nipple suitable for HDPE water tank complete all as specified and directed.

S&Fin repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor etc complete all as specified and as directed.

S&Fin repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor etc complete all as specified and as directed.

M&L Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes 200mm internal bore including packing under and hunching against the sides of pipes after they are laid and tested, in complete all as specified and directed.

M&L Salt galzed stone ware drain pipe , grade 'A' of 200mm dia laid in trenches and jointed including all accessories & fittings etc complete all as specified and as directed.

Cleaning of septic tank/ MH/grease trap of any description of size n. exc 1.5 M in depth including lifting up and removing sludge and accumulated/ semi solid sludge and other foreign material with trailor mounted sewage cleaning pumps/mechanical devices and removing to a distange n. exc 250 m where directed by Engineer in charge & washing down with water for smooth function of sewage etc complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement mortar all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description ( reinforcement cut as reqd to facilitate demolition) etc complete all as specified and as directed.

Dismentling structural steel work including doors, gates,grills but excluding framed truss etc complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets etc complete all as specified and as directed.

Demolition and breaking up drain pipes , 200 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar as in foul conditions etc complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings & fixtures such as switches, ceiling rose, pendants, regulators, sockets, ceiling roses,pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified & as directed.

Taking down ceiling fans from ceiling, dismantaling blades & refixing of the same including provision of cable from ceiling rose or connector to fan all as specified and directed.

Taking down Exhaust Fans, from walls and refixing the same including connecting up and provision of cable from ceiling rose or connector to fan all as specified and directed.

Taking down Geyser, from walls and refixing the same including connecting up and provision of cable all as specified and directed.

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including medium grade of suitable size of PVC Conduit Pipe ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in existing stone/ brick masonary, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :- NOTE : Chasis/ groove cutting shall be measured and paid separately under relevant items.

One light controlled by one single pole 5 Amps switch

One Ceiling fan point controlled by one single pole 5 Amps switch

One Exhaust fan point controlled by one single pole 5 Amps switch

One 3 pin switch socket out let point 5 Amps switch on independent board

One 3 pin switch socket out let point 5 Amps switch on same board

One bell Point controlled by one push button 5 Amps switch on independent board

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.50 sqmm 1100 volts grade in and including medium grade of suitable size of PVC Conduit Pipe ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in existing stone/ brick machinery, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 2.50 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :- NOTE : Chasis/ groove cutting shall be measured and paid separately under relevant items.

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 4.00 sqmm 1100 volts grade in and including medium grade of suitable size of PVC Conduit Pipe ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in existing stone/ brick machinery, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 4.00 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :- NOTE : Chasis/ groove cutting shall be measured and paid separately under relevant items.

Supply and fix Modular switch , 1 Module single pole one way 10 Amps.

Supply and fix Modular switch , 1 Module single pole one way 16 Amps.

Supply and fix modular socket , 2 Module 6 Amps, 2/3 pin, 240 volts Ac 2/3 pin combined all as specified and directed at site.

Supply and fix modular socket , 2 Module 6/16 Amps, 2/3 pin, 240 volts Ac 2/3 pin combined all as specified and directed at site.

Supply and fixing of modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm.

Supply and Fixing of modular type Bell push 6 A, 1 Module

Supply and Fixing of Ding Dong Bell, AC, 230 volts, Single Pole

Supply and fixing of modular white cover plate with frame, 1 module

Supply and fixing of modular white cover plate with frame, 2 module

Supply and fixing of modular white cover plate with frame, 3 module

Supply and fixing of modular white cover plate with frame, 4 module

Supply and fixing of modular white cover plate with frame, 6 module

Supply and fixing of modular white cover plate with frame, 8 module

Supply and fixing of metal flush box 1/2 module

Supply and fixing of metal flush box 3 module

Supply and fixing of metal flush box 4 module

Supply and fixing of metal flush box 6 module

Supply and fixing of metal flush box 8 module

Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.

S & F rigid PVC trunking white colour of 80 mm x 50mm with along with Bodies & with Flexible cover 65 MM as per OEM, LEGRAND fixing on Stone walls / brick masonary walls /ceilings /floors etc. for running of all type of service / miscellaneous cables complete with fitting such as joints /Tee /elbow /coupler etc, including taking down old PVC cable Trunking all as specified and as directed. Make : LEGRAND, CAT NO. : 010452,( BODY) 010521 (COVER ) or Equivalent makes

Supply and fixing of LED Light fitting, 40 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with 2 core flexible copper conductor cable of suitable size from Ceiling rose.MAKE : CG, MODEL NO : TRIMELINE NEU,CAT NO: CCS-100-40-30-SL-DP-NWH or equivalent make in HAVELLS/ WIPRO/ PHILIPS/ OSRAM

Supply and fixing of Sheet metal enclosures with socket plug top and MCB, Single pole & neutral enclosure with a 2 pin & earth plug & socket complete with one SP, MCB 20 amps

Supply and fix office LED Luminaires type 40 watts, LED 600 x 600 mm grid ceiling incl connecting up with PVC sheathed 1.5 sqmm 2 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Cutting into or through the stone walls / brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.

Cutting chasis, pinning in Stone walls/ brick walls etc. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc, for concealed conduit wiring a into or through the stone walls built in cement mortar or cement lime mortar and walls of cement concrete suitable for housing 25mm dia conduit pipe using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.

Supply & fix Exhaust fans AC single phase 230/ 240 V of size 380 mm sweep , 900 RPM, with louvers complete all as specified and as directed.

Supply & fix Wall mounted fans AC single phase 230 V of size 400 mm sweep , 2050 RPM, complete all as specified and directed. Make : BAJAJ, Model : NEO SPECTRUM, Code no : 250890 or equivalent make in HAVELLS/ CG/ WIPRO

Supply & fix Ceiling fans AC single phase 230 V of size 1200 mm sweep , 5 star rating , BLDC with complete all as specified and directed.

Supply and fix sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 2.5 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed in stone wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary inc 2.5 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

Supply and fix sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 4.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed in stone wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary inc 4.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

Supply and fix sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 6.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed in stone wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary inc 6.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

Supply and fix sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10 sqmm in and including non-metallic rigid PVC conduit and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary including 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

Supply and fix sub main wiring with Four single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed in stone wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary inc 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : Two runs of earth continuity conductor,one run of PVC Conduit and Four runs of copper conductor together taken as one length for measuring unit length.

Supply and fix sub main wiring with Four single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 16.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed in stone wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary inc 16.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : Two runs of earth continuity conductor,one run of PVC Conduit and Four runs of copper conductor together taken as one length for measuring unit length.

Material and labour for Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground ( earth pit not less than 2.25mtrs deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level, connected to galvanised earth lead wire 4.00 mmdia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indiacted including testing on completion.

Earth Continuity Conductor or main earthing lead fixed to wall on batten or recess or chasis or buried in ground or drawn in conduit / pipe or fixed for earthing etc. of size 4.00 mm dia galvanised iron or steel wire all as specified and as directed.

Supply & Fixing of Sheet metal enclosure for VTPN DB's double door TPN 04 ways Suitable for 125 Amps MCCB Fixed in DB, deep drawn with 200 Amps rated copper bus bar 415 V, complete all as specified and directed. Including taking down old unsv from exiting place.

Supply & Fixing of Sheet metal enclosure for VTPN DB's double door TPN 06 ways Suitable for 63 Amps MCCB Fixed in DB, deep drawn with 200 Amps rated copper bus bar 415 V, complete all as specified and directed. Including taking down old unsv from exiting place.

S&F Sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240 V, complete all as specified and directed. Including taking down old unsv from exiting place.

S&F Sheet metal enclosure for DB's double door TPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 415 V, complete all as specified and directed. Including taking down old unsv from exiting place.

S&F MCB TPN, 63 Amps, 415 V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F MCB SPN, 40 Amps, 240 V, C- series with breaking capacity of 10KA complete all as specified and directed.

MCB SP, 6-40 Amps, 240V, C- series with breaking capacity of 10KA complete all as specified and directed.

Supply and fixing of DOL Starter 3 Phase, 415 volts, 3HP for starting of pump

Supply and fixing of HIGH BAY LED LIGHT, Make : CG, Model : SURROUND NEO, CAT LHB11-80-CDL/60 M or equivalent make in BAJAJ/HAVELLS/WIPRO

Supply and fixing of INDUSTRIAL SOCKET, TPN, 3P+N+E 32 A, IP30, Make : INDOASIAN or equivalent in HAVELLS/ L&T.

Supply and fixing of Decorative Post Top light fitting, 360 degree with IP 65 protection resistant Make : CG, MODEL : MAPLE, CAT NO : LTPO-40-CDL or equivalent make in BAJAJ/HAVELLS/WIPRO

Supply and fixing of MCCB 125 A, TPN, 25 KA, Make : INDO ASIAN, HSN CODE : 8536 or equivalent in HAVELLS/ L&T.

Supply and fixing of MCCB 63 A, TPN, 16 KA, Make : INDO ASIAN, HSN CODE : 8536 or equivalent in HAVELLS/ L&T.

Supply and fixing of LED 25 WATTS BUILDING SECURITY LIGHTS, Make : CG, Model : FREEDOM NEO, CAT NO : LSTS-25 CDL-M or equivalent make in BAJAJ/HAVELLS / WIPRO

Supply and fix Surge protection device Type TP+N, AC Triple pole and neutral, 20kA N Havells Model DHSAANBC50320 or equivalent in Indo Asian/ Legrand/L&T complete all as specified and directed.

Supply, Install, testing and commissioning of Air Curtain 6 Feet of Length with Complete accessories NOTE : For Item Sl. No 5 to 7, 33 to 34 Chasis/ groove cutting in stone walls/ brick wall/ block masonary walls as required for concelaed wiring shall be measured and paid separately under relevant item no 31 & 32

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements on Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in existing stone/ brick masonary, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One light controlled by one single pole 5 Amps switch

One Ceiling fan point controlled by one single pole 5 Amps switch

One Exhaust fan point controlled by one single pole 5 Amps switch

One 3 pin switch socket out let point 5 Amps switch on independent board

Point wiring for Armoury with PVC insulated FRLSH copper multistranded conductor 1.5 sqmm 1100 volts gradedrawn in surface mounted stove enamelled black steel conduit with all accessories and fixing arrangements on Stone walls / brick masonary walls /ceilings / floors etc in existing stone/ brick masonary, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for Flame proof ceiling fan/ exhaust fan

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.50 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangement on Stone walls / brick masonary walls /ceilings / floors etc existing stone/ brick machinery, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 2.50 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed.

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 4.00 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements on Stone walls / brick masonary walls /ceilings / floors etc. in existing stone/ brick machinery, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 4.00 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed.

Supply and fixing of LED Light fitting, 20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with 2 core flexible copper conductor cable of suitable size from Ceiling rose.

Supply and Fixing of Geyser 25 Litres Capacity Suitable for high pressure upto 8 bar, 2 Kilowatts, Powder coated metal body, Temperature indicating dial, fire retardant cable, Efficient long life Copper heating element, Shock proof & Rust proof ABS body, 5 Star rated, including provision of PVC/ Metal Hot & Cold pipes for inlet & outlet connection from geyser. Complete all as specified and as directed. Make BAJAJ, Model : CALDIA, CODE : 150756 or Equivalent make in HAVELLS/CG/RACOLD

Supply & fix of flame proof Ceiling fans AC single phase 230 V of size Make : Sudhir, Model : SIMEX, EF/140 complete all as specified and directed.

Supply and fix Switch flame proof rotary type with termination box in LM6 16 a pole 250 V complete all as specified and directed.

Supply and fix sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 2.5 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixed on stone wall, floor or ceiling etc by cutting chasis on existing stone/ brick masonary inc 2.5 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

Supply and fix sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 4.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixed on stone wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary inc 4.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

Supply,install,testing and commissioning of 240/230 volt operated Audible alarm system for walk-in-cooler with necessary power and control wiring all as per manufacturers instruction and all as specified and directed by Engineer in charge.

M & L LT UG cable 3.5 core x 35 sq mm 1100 Volts grade XLPE insulated , armored, heavy duty with aluminium conductor laid in trenches or fixed to walls/ poles or passing through pipes with and including,cable gland lugs/ thimbles/ ferrules including connecting, testing and commissioning complete all as specified and as directed.

Supply and laying un-reinforced precast concrete cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm laid in trenches as in protection of UG cables all as specified and as directed.

Supply and Fix GI tubing light grade 50 mm bore as in cable protection fixed to poles/walls or laid intrenches/under road crossing etc all as specified and as directed.

Material & Labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth strip of size 32 x 6 mm by means of bolts, nuts and washers of galvanised iron or steel all as shown in elecrtical plate No 3 of SSR pt I, connected to DB/earthing test point including PCC chamber , RCC cover 50mm thick with 8 mm dia bars, protection pipe, funnel etc including excavation, earth work, disposal of surplus soil and earth strip protection pipe of GI 40 mm bore light grade upto 7.5 metre including testing on completion all as specified and as directed.

GKR and CO

OM CONSTRUCTIONS