Water Supply work in different under Nagar parishad Chakradharpur

G.I. Pipe 50 mm dia (TATA or equivalent make) as per IS-1239 (part-01) / 2004 ISI Marked / Medium Quality

G.I. Fittings ( Conforming to I.S. - 1879 )

[A] G.I. Bend

(iii) 25 mm

(vii) 65 mm

[B] Elbow

(iii) 25 mm

(vii) 65 mm

[C] Tee Plain

(iii) 25 mm

(vii) 65 mm

[D] Reducing Tee Plain ( Taking large dimension)

(i) 20 mm X 15 mm

(ii) 25 mm X 15 mm

25 mm X 20 mm

(iii) 32 mm X 15 mm

32 mm X 20 mm

32 mm X 25 mm

(iv) 40 mm X 15 mm

40 mm X 20 mm

40 mm X 25 mm

40 mm X 32 mm

(v) 50 mm X 25 mm

50 mm X 32 mm

50 mm X 40 mm

(vi) 65 mm X 50 mm

[E] Socket Plain ( Taking large dimension)

(iii) 25 mm

(vii) 65 mm

[F] Reducing Socket Plain ( Taking large dimension)

(i) 20 mm X 15 mm

(ii) 25 mm X 15 mm

25 mm X 20 mm

(iii) 32 mm X 15 mm

32 mm X 20 mm

32 mm X 25 mm

(iv) 40 mm X 15 mm

40 mm X 20 mm

40 mm X 25 mm

40 mm X 32 mm

(v) 50 mm X 25 mm

50 mm X 32 mm

50 mm X 40 mm

(vi) 65 mm X 50 mm

[G] Union Socket

(iii) 25 mm

(vii) 65 mm

[H] Plugs

(iii) 25 mm

(vii) 65 mm

[H] Jam Nuts

(iii) 25 mm

(vii) 65 mm

[J] G.I. Nipple

(i) 15 mm X 100 mm long

(ii) 20 mm X 100 mm long

(iii) 25 mm X 100 mm long

(iv) 32 mm X 100 mm long

(v) 40 mm X 100 mm long

(vi) 50 mm X 100 mm long

(vii) 65 mm X 100 mm long

[K] G.I Pipes (TATA mark or equivalent) as per IS-1239 (Part-01)/ 2004 ISI Marked / Medium Quality

(i)15 mm dia

(ii) 20 mm dia

(iii) 25 mm dia

(iv) 32 mm dia

(v) 40 mm dia

(vii) 65 mm dia

Providing and supplying in standard lengths High Density Polyethylene Pipe (HDPE Pipe) confirming to IS 4984 / 14151 / 12786 / 13488 (Latest Revision with necessary jointing materials like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joints excluding coupler / specials and taxes). Note :- The Rates are F.O.R at worksite in Jharkhand including Royatty, inspection Charges and other taxes but excluding CST & C.P.

HDPE i e of materials Grade PE80-PN10 ( dia in mm )

(iii) 25 mm dia

(iv) 32 mm dia

(v) 40 mm dia

(vi) 50 mm dia

G.M. Non Return Valve Vertical (ISI marked)

(vi) 50 mm dia wt. not less than 1 kg

Cocks (ISI Marked)

(i) 15 mm dia G.M. bib cock wt. not less than 300 gms

(B) Providing doubte flange sIuice valve (Size 50 mm to 1200 mm) confrming for lS - 2906 / 14846 inctuding worm gеаг arrangements аs рег test pressure stailess steeI spindle , caps, transportation etc. all compIete.With bypass arrangement - PN-1.6

Supplying submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryt impeller. Motor suitable for working on 415V+-10% , 3PH, 50 Hz, AC- supply with cable guard, thrust carboh/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump.

Submersible Pump 150 mm dia (with Bronze/ SS impeller) up to 8 Stages

STARTER

D.O.L. Starter with SS Enclosure with 380/415 Volt Coil

5 to 10 H.Ps

Supplying Fully automatic star delta starter to operate induction motor working on 415v , 3 phase , 50 hz with no volt coil, Overload element, ON-OFF push buttons with necesssary materials and connected to supply,etc complete starter with original sheet steel encloser.

F.AS.D Starter

FOOT VALVE

F.AS.D Starter

Flanged type

100 amps. TPN, Switch disconnector fuse unit with ISI marked HRC fuses

63 amps. Rating,TPN, MCB, "C" Series, 10 KA breaking capacity.

3 core 2.5 sq.mm FR PVC insulated copper wire

Solvent Cement

Hexagonal Bolt M12X1.75 mm common to Mark II & III

Hexagonal Bolt M12X1.75 mm

Washer M12 (2.5mm thick)

Honda Dewatering Pump 3.01 horsepower (Model No- Honda WB30XD (GX160)

Crompton MONOBLOCK PUMP, 1 horsepower (MINI CHAMP PLUS I)

Lifting Equipment

Chain Pulley Block

Supplying triple spur gear type chain pulley block suitable for capacity as below 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark.3 Tonne Capacity

Add Gst @ 18%

LABOUR CESS @ 1%