Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC RCP GURUDWARA ROAD WARD NO 29 SURATGARH SRI GANGANAGAR 335804 | SURATGARH | SRI GANGANAGAR | RAJASTHAN | 335804 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹31.1 L+₹3.0 L (10.5%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST |
Tender Value
Refer Docs
EMD Value
₹65,340
Closing Date
20 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL PRIYESH SRIVASTAVA
GE (AF) SURATGARH
PROVISION OF QTY-07 TOILETS AT AF STN SURATGARH
2023_MES_576751_1
8025/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) SURATGARH
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
Yes
GE (AF) SURATGARH
₹65,340
Yes
7 Mar 2023
23 Jan 2023
22 Feb 2023
23 Jan 2023
20 Feb 2023
6 Feb 2023
Amount
(PROVISION OF QTY-07 TOILETS AT AF STN SURATGARH )
Excavating over areas n exc 1.5m deep and getting out in soft/loose soil
Excavating over areas exc 1.5m deep and upto 3m deep getting out in soft/loose soil
Excavating over areas exc 3 deep and upto 4.5m deep getting out in soft/loose soil
Excavation in trenches not exc 1.5m wide and and not exc. 1.5m depth wide in soft/loose soil n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil, complete all as specificed and directed by Engineer-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil
Removing excavated soil n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point
M&L cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate)as in foundation , filling and mass concrete complete all as specified and as directed by the Engr-in-Charge
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed by Engr-in-Charge.
M& L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:6 complete all as specified and as directed by Engr-in-Charge.
M&L hardcore of broken bricks in Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed by Engr-in-Charge.
M&L Hardcore of gauge n. exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface in broken stones or boulders complete all as specified and as directed by Engr-in-Charge.
M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate), 100mm thick as in sub base complete all as specified and as directed by Engr-in-Charge.
M&L for PCC 1:2:4 type B2 (using 40 mm grade aggregate), 100 mm thick as in sub base in floor/pavings etc finished fair and even without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for PCC 1:3:6 type C2 (using 40 mm grade aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for Reinforced cement concrete (Nominal mix) beams, cantilevers, slab ,bressummers, lintels over 1.5m span in 1:2:4 type B1 (using 20mm graded aggregate) complete all as specified and as directed by Engr-in-Charge.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilever, shelves including sup-ports, overhangs etc also splays between floors and beams etc flat in rough finished surfaces of concrete complete all as specified and as directed by Engr-in-Charge.
Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concretewalls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontalor sloping and similarwork exc 5cm but n exc 10cm in rough finished surface of concrete complete all as specified and as directed by Engr-in-Charge.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge
M&L for mild steel TMT bars 6mm to 8 mm dia , cut to length, bent to shape required including cranking bending spirally for hooping columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing (even and smooth without using extra cement) complete all as specified and as directed by Engr-in-Charge
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
S&F 110mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engr-in-Charge.
S&F 110mm bore dia PVC (SWR) bends any radius complete all as specified and as directed by Engr-in-Charge.
S&F 110mm bore dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed by Engr-in-Charge.
S&F 110mm bore dia PVC (SWR) vent cowl complete all as specified and as directed by Engr-in-Charge.
M&L for applying two coats of distemper oil emulsion on newly plastered surfaces over alkali resistant primer on wall including preparation of new surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces finishing even and smooth without using extra cement complete all as specified and as directed by the Engr-in-Charge
M&L for applying two coats of cement base paint after preparation of newly plastered/concrete surfaces over alkali resistant primer on wall complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete ceiling surfaces, finishing even and smooth without using extra cement complete all as specified and as directed by the Engr-in-Charge
M&L for applying three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for moorum/ red bajri filling in floors or pavings, laid in layers n. exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed by Engr-in-Charge.
M&L for PCC 1:2:4 type B2 (using 40 mm grade aggregate) 100 mm thick as in sub base finished even and rough to receive top layer complete all as specified and as directed by Engr-in-Charge.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 but n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.
M&L for Glazed colour ceramic tiles in vertical surface 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.
Forming construction joint 30mm deep x 10mm wide filled with grade 'A' sealing compound complete all as specified and as directed by Engr-in-Charge.
S&F PVC solid door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed by Engr-in-Charge.
S&F factory made solid panel PVC door shutter, 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frames shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed by Engr-in-Charge
S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-Charge.
S&F extruded aluminium alloy handle of size 100mm, fabricated type, anodised complete all as specified and as directed by Engr-in-Charge.
S&F stainless steel butt hinges 100 mm size medium weight , cold rolled complete all as specified and as directed by Engr-in-Charge.
S&F ventilators with top hung shutter including hinges, steel peg stay, complete but without glazing bars, dovetailed or welded complete all as specified and as directed by Engr-in-Charge.
S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and as directed by Engr-in-Charge.
M&L for applying two coat of synthetic enamel paint on steel surfaces of any description over 10cm width or girth not otherwise described over a coat of red oxide zinc chrome primeer including preparation of new surfaces complete all as specified and directed by Engr-in-Charge
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engr-in-Charge.
Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed by Engr-in-Charge.
Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed by Engr-in-Charge.
M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing /cutting in CM 1 : 3 width exc 10 cm but not exc 20 cm girth in brick walls etc complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tank of 500 litres capacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.
S&F 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.
S&F Gun-metal, globe or gate valves 20 mm, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
S&F110mm PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.
S&F 75mm PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.
S&F 75mm PVC (SWR) bends any radius complete all as specified and as directed.
S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F vitreous china wash down water closet pan (Pedestal pattren) white with trap including connection to drain (or outgoing pipes ) and to flushing pipe antisyphonage pipe etc including making goood to floor etc complete all as specified and as directed.
S & F Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.
S&F tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F chromium plated shower roses with or without swivel joints, 125mm dia suitable for 15mm pipe complete all as specified and as directed.
S&F PVC connection 15mm size, 450mm long with PTMT nuts both side complete all as specified and as directed.
S&F 15mm bore dia Stop valve fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.
S&F 15mm bore dia Cast copper alloy bib taps Chromium Plated fancy type with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F10 ltrs capacity PVC valveless, syphonic action type, flusing cistern with PVC flush pipe 32mm dia, low level, white, with inlet ball valve, float and handle including brackets complete all as specified and as directed.
S&F vitreous china wash hand basin oval type, waste coupling etc complete all as specified and as directed.
S&F PVC waste pipe 32mm dia 80cm long with socket complete all as specified and as directed.
S&F white viterous china battery based infrared sensor flushing valve for urinal with complete kit for urinal of size 480x300x740mm having pre & post flushing with water, including fixing to walls complete all as specified & directed. Make : Jaquar Cat No URS-WHT-13255 & SNR-51097 or Equivalent .
S&F 10 mm thick curved shape urinal partition of Size 900X450 fixed with stainless steel brackets & clamps complete all as specified and as directed Make : Jaquar Cat No JSE-CHR-810UC450X or Equivalent.
S&F sensor based hand dryers having Stainless steel finish fixed in position complete all as specified & directed. Make : Jaquar Cat No HDR-SAP-M99ACS or Equivalent ..
S&F , wall hung WC of size 355X545X410 mm with soft close seat cover hinges accessories set with concealed body of I flush 32 mm and exposed part kit of i flush with dual flush push button actuation & control stop cock complete all as specified & directed. Make : Jaquar Cat No.: FNS-WHT-40951UF & FLV-1073C & FLV-1075NK or Equivalent .
S&F , viterous china Counter table top wash hand basin of size 700X435X135 mm complete all as specified & directed. Make : Jaquar Cat No.: ARS-WHT-39903 or Equivalent .
S&F , CP waste coupling of 32 mm size half thread with 130mm height for WHB complete all as specified & directed. Make : Jaquar Cat No.: ALD-709L130 or Equivalent .
S&F CP 32mm bore bottle trap (with internal partition) with 300mm & 190mm long wall connection pipes & Wall flanges complete all as specified & directed. Make : Jaquar Cat No.: ALD-769L 300x190 or Equivalent.
S&F 600mm long braided hose with two 15mm nuts & O-ring rubber washer complete all as specified & directed. Make : Jaquar Cat No.: ALD-801B or Equivalent .
S&F , CP hand shower (health faucet) with 8mm dia 1m long flexible tube & wall hook complete all as specified & directed. Make : Jaquar Cat No.: ALD -579 or Equivalent .
S&F 15mm bore CP Bib Cock auto closing system with built in control cock with wall flange complete all as specified & directed. Make : Jaquar Cat No.: CON-047KN or Equivalent .
S&F stainless steel toilet roll holder with Flap recessed type complete all as specified & directed. Make : Jaquar Cat No.: ACN-1153S or Equivalent .
S&F slim concealed cistern with floor mounting frame, installation kit and 'P' type drain pipe connection set for wall hung WC (without flushing control plate) complete all as specified & directed. Make : Jaquar Cat No: JCS-WHT-2431FS or Equivalent .
S&F control plate segment chrome plated flushing plate for concealed flushing cistern complete all as specified & directed. Make : Jaquar Cat No.: JCP-CHR-102415 or Equivalent .
S&F soap dispenser push button with white finish of capacity 0.8Lwith glass bottle complete all as specified & directed. Make : Jaquar Cat No.: SDR-WHT-DJ0010F or Equivalent.
S&F soap dish holder complete all as specified & directed. Make : Jaquar Cat No.: ACN-1131N or Equivalent .
S&F towel ring square with round flange complete all as specified & directed. Make : Jaquar Cat No.: ACN-1121N or Equivalent.
S&F 15mm bore battery operated sensor faucet for Wash basin with 175mm extension body complete all as specified & directed. Make : Jaquar Cat No.:SNR-51021A or Equivalent .
S&F 15mm bore CP Angular stop cock with wall flange complete all as specified & directed. Make : Jaquar Cat No.: CON059KN or Equivalent .
S&F overhead shower of 100 mm dia round shape multiflow (ABS body chrome plated with gray face plate ) with rubit cleaning system with concealed body of and exposed part kit of single lever shower mixer with 3 way diverter complete all as specified & directed. Make : Jaquar Cat No.: KUP-35783KPM & OHS-1999 &ALD-783 or Equivalent .
Providing & fixing false ceiling with fully perforated 12mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 X 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99% NRCO .50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 X 32mm of lenth 3000mm, cross-T of size of 15 X 32 mm of length 1200mm and secondary intermediate cross-T of size 15 X 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm Galvanised iron perimeter wall angle of size 24x 24x0.40mm of lengh 300 mm to be fixed on periphary wall/ partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specification drawing and as per direction of the Engineer-in-Charge
S&F powder coated aluminium window/ventilator using 63mm X 38mm X 1.6mm chowkhats with 45mm X 45mm X 1.6mm openable section as in shutter incl 5.5mm thick glass panes of approved make with rubber for fixing glass and including builder hardware such as aluminium handles 100mm - 02 Nos, tower bolts 100mm 02 Nos, hooks and eye - 02 Nos 150mm, butt hinges 100mm 04 Nos etc complete all as directed by Engr-in-Charge.
S&F 0.65mm thick sunmica of the approved shade & pattern on the existing woodwork complete all as specified & directed.
S&F 3mm thick teak plyboard with teak face veeners on one face on the existing woodwork complete all as specified & directed.
M & L for Digital printed wall tiles of size 300mm X 450mm x 7mm thick as in vertical surfaces set and jointed in neat cement slurry with spacers and pointed in epoxy tile grout to match the shade over and including 10 mm thick rendering in CM 1:4 in back coat complete all as specified & directed..
M & L for coloured digital printed ceramic non-skid tiles area of tiles exceeding 0.06 sqm but not exceeding 0.18 sqm and 7-8 mm thick laid in floors with spacers, set and jointed in neat cement pointed in epoxy tile grout to match the shade over and including 15 mm thick screed bed in CM (1 : 6) complete all as specified and as directed.
M&L Granite (of any type) work (table rubbed and polished) in steps jambs pillar platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing complete all as specified & directed.
S&F 50 mm dia bore sand cast iron soil waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified & directed.
S&F 50 mm dia bore cast iron cowls complete all as specified & directed.
M&L for 150mm internal bore dia Double wall corrugated PE pipes laid in trenches and jointed and testing complete with all necessary hardware complete all as specified & directed.
M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe line complete all as specified and directed.
M&L for Precast cement concrete (1:2:4), type B1 (using 20 mm graded stone aggregate) in cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete all as specified and directed.
M&L for point wiring with single core PVC insulated unsheathed 1100 volts grade FRLS cable of copper conductor multi stranded of size 1.5 sqmm (Nominal size) drawn through and including non metallic rigid PVC conduit medium grade, ISI marked not less then 20 mm dia with all accessories like tee, straight joint, L bend etc concealed in wall , ceiling , floor etc, pressed GI modular boxes in wall of required size and colour for modular switches and sockets, 1.5 sqmm (Nominal size) PVC insulated (green insulation) copper conductor FRLS earth continuity cable drawn with wiring and connected to common earth dolly all as specified for one light point controlled by one SP switch including making good distrubed surface, complete all as specified and directed. Note :- GI modular boxes shall be measured and paid under respective item & Cost for cutting, chasing and making good to existing surfaces shall deemed to be included in the quoted rate.
All as per Srl item No 98 here-in-before but for one 5 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size, complete all as specified and directed.
All as per Srl item No 98 here-in-before but for one 5 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size, complete all as specified and directed.
S&F Socket modular type 6 Amps 2/3 pin combined 2 module 250 volts complete all as specified and directed by Engineer-in-Charge.
S&F Switch modular type, one way 6 Amps 1 module, 250 volts , complete all as specified and directed by Engineer-in-Charge.
S & F modular white cover plate with frame suitable for 2 module complete all as specified and directed by Engineer-in-Charge.
S & F modular white cover plate with frame suitable for 3 module complete all as specified and directed by Engineer-in-Charge.
S & F modular white cover plate with fraame suitable for 8 module complete all as specified and directed by Engineer-in-Charge.
S & F modular metal flush box for mounting of modular cover plates 2 modules complete all as specified and directed by Engineer-in-Charge.
S & F modular metal flush box for mounting of modular cover plates 3 modules complete all as specified and directed by Engineer-in-Charge.
S & F modular metal flush box for mounting of modular cover plates 8 modules complete all as specified and directed by Engineer-in-Charge.
S&F of ceiling rose, surface type, 65mm x 50mm, 3 phase /PVC/ polycarbonate isolated body complete all as specified and as directed by Engr-in-Charge.
S&F of lamp holder, PVC/polycarbonate type, insulated body with back plate suitable for batten fitting complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Cona/Havells.
S&F of LED bulb 09 watt, complete all as specified and directed.
Supply and fixing energy saving slim design light fitting 230 volts surface mounted complete with high efficiency PMMA diffuser soft glare free light LED tube light 20 watt with all accessories prewired etc including providing flexible copper wire three core cable PVC insulated sheatted complete all as specified and as directed by Engr-in-Charge.
S & F LED light fitting 1X10Wbulkhead luminaires wall /surface mounted complete with all accessories prewired etc including providing flexible copper wire twin core cable PVC insulated sheatted complete all as specified and as directed by Engr-in-Charge.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 230 V AC decorative type with driver holder and LED lamp including connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge.
S & F exhaust fan with louvers plastic body complete 300 mm sweep 230 volts single phase AC supply complete with fixing accessories embedded in the wall including provision of flexible cord copper of size 1.5 sqmm three core from ceiling rose to exhaust fan for giving connection and providing continuos earthing connection complete all as specified and as directed by Engr-in-Charge.
S&F Sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs, IP-43, 4 way, with 200 amps rated busbar, 415 volts, as per IS-8623 complete all as specified and directed by Engineer-in-Charge.
S&F MCB SP, 6 to 32 Amps, C series, breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge.
S&F MCB SPN 32 amps 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge.
S&F XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured heavy duty electric power cable 1100 volts with stranded aluminium conductor of size 10 Sqmm 2 core laid in trenches or under road , complete all as specified and directed by Engineer-in-Charge. Note: Excavation, sand and brick work will be measured & paid separately.
M&L for sand cushioning to cables with a layer of sand 8 cm deep before laying the cable and 15 cm depth (punned down to 10 cm depth after laying and stretching of cable), complete all as specificed and directed by Engineer-in-Charge. Note: Punned thickness (over all 18 cm) shall be measured & paid.
M&L for brick of common burnt clay, sub class 'B' old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cables abutting each other , complete all as specified and directed by Engineer-in-Charge.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed.
Contract Amount shall be derived on General Summary serial page No 17 of tender documents.
H S BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .