Construction of boys and girls toilet block at Government senior secondary School Bathri Block Dalhousie District Chamba HP

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, with in a lead of 50 m. as directed by the Engineer-in- charge.

Centering and shuttering including strutting, propping etc. and removal of form for mass concrete including carriage of material in all lead & lifts.

Foundations, footings, bases of columns, etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including carriage of material in all lead & lifts.

Providing and laying Reinforced cement concrete 1:2:4 (1cement:2 sand: 4 graded stone aggregate 20 mm nominal size) and vibrated and curring complete excluding cost of form work and reinforcement for reinforced concrete works including carriage of material in all leads & lifts.

Foundations, footings, bases of column and the like and mass concrete.

Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.

Column, pillars, posts and struts upto all heights

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all lead & lifts.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. in cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of material in all leads and lifts.

Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including carriage of material in all leads and lifts. (i) Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) With frosted glass panes of 5 mm thickness (weight not less than 12.50 kg / sqm) including carriage of material in all leads and lifts.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. including carriage of material in all leads and lifts.Pre-laminated particle board with decorative lamination on both sides

Providing and fixing powder coated aluminium sliding door bolts, ISI marked anodised (powder coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as approved by Engineer in charge :300x16 mm including carriage of material in all lead & lifts.

Providing and fixing powder coated aluminium handles, ISI marked, anodised (powder coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as approved by Engineer in charge including carriage of material in all lead & lifts.

Providing and fixing powder coated aluminium tower bolts, ISI marked, anodised (powder coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as approved by Engineer in charge including carriage of material in all lead & lifts.

6 mm cement plaster to ceiling of mix :1:3 (1 cement : 3 fine sand). including carriage of material in all lead & lifts.

15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand). including carriage of material in all lead & lifts.

20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) including carriage of material in all lead & lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thouroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as approved by Engineer in charge including carriage of material in all leads and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated ceiling and /or slopping roofs to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thouroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as approved by Engineer in charge including carriage of material in all leads and lifts.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as approved by Engineer in charge including carriage of material in all lead & lifts.

Providing and laying antiskid floor tiles of any size & colour (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. as approved by Engineer -in-charge including carriage of material in all leads and lifts.

Digital tiles any size & any coular in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry as approved by Engineer -in-charge including carriage of material in all leads & lifts.

Providing and fixing 20 mm nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as approved by Engineer in charge.

Providing and placing on terrace (at all floor levels) 500 Litre capacity sintex/vectus polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with fittings and without the base support for tank including carriage of material in all leads and lifts

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes including fixing with approved adhesive as approved by Engineer in charge including carriage of material in all leads and lifts: (confirming to BIS Specifications) (i)110mm nominal size

Providing and fixing 20 mm dia Brass full way valve with wheel (Heavy Duty) as approved by Engineer in charge including carriage of material in all leads and lifts.

Providing and fixing PVC oval access door bend, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as approved by Engineer in charge including carriage of material in all leads and lifts: (i) 110mm nominal size

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc, complete as approved by Engineer in charge including carriage of material in all leads and lifts. (i)110mm nominal size

Providing and fixing PVC collars fixing with approved adhesive as approved by Engineer in charge including carriage of material in all leads and lifts . (i) 110mm nominal size

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the walls and floors: (confirming to BIS Specifications) including carriage of materialn all leads and lifts.(i)110x90mm

Providing and fixing white vtreous china water closet squatting pan (Indian type W.C Pan) size 580 mm earth work bed concrete Foot rest and trap to be measured and paid for separately including carriage of materialn all leads and lifts.(i) Orrissa pattern

Providing and fixing coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material in all leads and lifts.

Providing and fixing Flat back wash basin with C.I. brackets size 550x 400 mm with single 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require as approved by Engineer in charge including carriage of material in all leads and lifts .

Providing and fixing white vitreous china flat back urinal basin of 430x260x350 mm sizes respectively including carriage of material in all leads and lifts.

Providing and fixing Vitreous China Division Plate for Urinals 600mm x 300 including carriage of material in all leads and lifts.

Providing and fixing C.P. brass soap dish with C.P.brass brackets fixed to wooden plugs with C.P. brass screws as approved by Engineer in charge including carriage of material in all leads and lifts.

Providing and fixing C.P. brass pillar tap wih capstan head 15 mm dia as approved by Engineer in charge including carriage of material in all leads and lifts.

Providing and fixing C.P. brass Bib tap wih capstan head 15 mm dia as approved by Engineer in charge including carriage of material in all leads and lifts.

Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 as approved by Engineer in charge including carriage of material in all leads and lifts.

Providing and fixing 15 mm nominal bore C.P. connection pipe with brass unions 45 cm length including carriage of material in all leads and lifts.

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials in all leads and lifts.