CERTAIN MINOR AND REVENUE WORKS AT AF STN NAL AND BIKANER UNDER GE (AF) NAL

Amount

Work to be Executed at AF STn Nal( Item 2 to 24)

Taking down chowkhats or frames n exc 1.5 sqm each with shutters (Without taking off shutters from the frames), complete all as specified and as directed.

Taking down chowkhats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (Without taking off shutters from the frames), complete all as specified and as directed.

Demolition of brick brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles. , complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (Below or above ground level)., and removing debris outside MOD land, complete all as specified and as directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors) beams, staircases, landings, chajjas and similar suspended work, and removing debris outside MOD land, complete all as specified and directed

Dismantling of structural steel work including doors, gates, ladders and railing etc but excluding framed truss etc, and removing debris outside MOD land, complete all as specified and directed

Dismantling water tank of capacity exc 250 & n exc 500 ltrs , complete all as specified and directed

Taking up or down steel tubing of 15mm bore , complete all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets work complete all as specified and directed

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame complete

Providing and fixing Rock Fiber (Bio-Safe) Acoustical (NRC Upto 0.9) Micro Look Edge False Ceiling Tile at all heights of size 595X595mmx15mm of approved texture, design and pattern. Rock Wool Tile should have Acoustical Tissue Paper on the top face and harden edge to achieve NRC-0.80 as per ASTMC-423/ISO 354. The tiles should have Anti Bacterial coating & Passed the Test Method as per Indian standard, Should passed resistance to fungal attack test as per ASTM:G21-15. Relative Humidity (RH) more than 85%, Fire Performance as per Vertical flammability test (UL94) Classification V1 (Flame extinguishes within 30 seconds with no dripping) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.30 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm (Black Silhoute) of length 3000 mm, cross T of size 15x32mm (Black Silhoute) of length 1200 mm and item 12.01 CONTD/...

secondary intermediate cross T of size 15x32 mm (Black Silhoute) of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 22x19x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. (Supplier Company should be OEM and same Test Certicates will be required from contractor before billing of the item). The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L for PCC 1:3:6 (40mm gragded crashed stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat & rough finished surfaces of concrete

M&L for PCC 1:2:4 (40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.

M & L for Rendering 5 mm thick with CM(1:6) on fair face of brick work/concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc for making fire point and fixing with fastening or in concrete of Fe 410 -W (Gee- 250) quality?A?complete all as specified and directed.

S & F 1.60mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

M&L for preparation of new steel surface and applying 02 coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

M&L for preparation of newly plastered surface and applying two coats of Acrylic Smooth exterior paint of required shade applied over and including one coat of alkali resistant primer in camaflouge pattern complete all as specified and directed.

M & L for Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high, complete all as specified and as directed.

Work to be executed at AF stn Bikaner Station( Item No 26 to 48 )

Disconnecting and removing ceiling fan of 1200/1400 mm sweep any height from electrical connection bringing down, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable 3 core drawn through and including flexible conduit 15mm size from ceiling rose to fan including cleaning all dust etc and testing complete all as specified.

Supply only Anti-suicide down rod of fan suitable as per site condition 45/60 Cm long with rubber seal, clamp, nut bolts and spring.

Supply and fixing bottled water dispenser, having option of dispensing hot and cold water with cooling capacity 3 ltrs/hr and tank capacity of 3.4 ltrs, heating capacity 6 ltrs/hr and tank capacity 1.6 ltrs, working in R - 134a refrigerant complete all as specified and directed.

Supply and fix desert cooler electric driven (single phase), 70L tank capacity. PVC/Plastic Body, cooling media - Honeycomb, incl 04 Nos castor wheel fit to place in indoor and outdoor, High air delivery all as specified and directed. Make : Havells model Cella70 or equivalent in in list of makes.

supply & fix exhaust fans AC single phase 230/ 240 V of size 230 mm sweep with louver complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote complete all as specified and directed.

Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated,230 Volt, single phase complete with following specification :- (i) Shock safe plug, (ii) Feroglas Technology, (iii) PUF insulation (iv) Incoloy glass coated heating element (v) 0.8 MPa high working pressure (vi) Whirlflow Technology (vii) Adjustable knob for temperature setting (viii) Plasto shield outer coating (ix) IPX-4 Protection (x) 7 Year warranty for tank complete all as specified and directed.

S&F hot & cold PVC connection pipe 18" for geyser complete all as specified and directed

S&F brass angle valve for geyser inlet and outlet pipe 15mm dia comple all as specified and directed.

M&L Cutting holes in brick walls Exc. one brick but not exc. two brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and as directed.

M&L F-290 (Gde E-165) grade Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F 125 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed all as specified and directed.

S&F 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed.

S&F 125 mm Mild steel pressed handles, oval type, stove enamelled blackall as specified and directed.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165,all as specified and directed.

M&L Running welding Exc 6mm but n exc 9mm, all as specified and directed.

M&L for painting two coats of synthetic enemel paint over and including a coat of red oxide including prep of new steel surfaces, complete all as specified and as directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and directed.

M&L for mild steel work as in clamps, hold fasts, wall ties, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for PCC 1:2:4 type B1(using 20mm graded crushed stoned aggregate ) for fixing hole fasts , complete all as specified and as directed.

Material and labour rendering 15 mm in cement mortar 1:6 on fair faces of brick or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for prep of old steel surface and painting a coat of synthetic enemel paint, complete all as specified and as directed.

Beenu Co. Company (BID ID -3414362)