ADDN/ ALTN AND SPECIAL REPAIRS TO BLDGS No P-11 AND P-12 JCOs MD ACCN OF RECORDS AT MEANEE LINES MEG AND CENTRE UNDER GE (NORTH) BANGALORE

Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Demoltion of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

M&L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in 100 mm thick sub base for path etc complete all as specified and as directed

M&L for Plain Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in 25 mm thick levelling course of flooring etc complete all as specified and as directed

Point

M & L for factory made chamfered edge cement concrete paver block 60mm thick of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;etc complete all as specified and directed. (Note : Sand will be measured & paid seperately)

M & L Vitrified coloured Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including screed bed 15 mm thick cement mortar (1:6) including dismantling floor, hearth etc complete all as specified and as directed

M&L for Pre-cast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in landings, cover slab for manholes etc and similar work including necessary form work and set in CM 1:6 etc complete all as specified and directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

M&L for rendering 10 mm thick CM (1:6) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering total 15mm thickness i.e., first layer 10 mm thick in CM (1:6) and second layer rendering 5 mm thick in CM(1:4) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction finished even and smooth without using extra cement etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for Plain cement concrete (1:2:4) type B-0 using 12.50mm graded stone aggregate in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed

M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in hold fast block and filling of pressed steel chowkat including necessary formwork etc complete all as specified and as directed

M&L for Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed

S & F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

sh type universal all as specified and as directed

S & F CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down existing GI/CPVC pipe line etc complete all as specified & directed.

S & F CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down existing GI/CPVC pipe line etc complete all as specified & directed.

S&F PVC (SWR) vent cowls 75 mm dia bore complete all as specified and as directed

Complete removal of existing treatment of wall surface (Internal and External) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface including rubbing and washing etc complete all as specified and as directed

M&L for preparation of wall surface with sand paper etc and applying 1mm thick wall care putty finished to smooth surface etc complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats distemper acrylic emulsion, white or tinted over a coat of alkali resistance primer complete all as specified and as directed

M&L for Preparing old treated suface of walls and applying two coats distemper acrylic emulsion, white or tinted over a coat of alkali resistance primer complete all as specified and as directed

S&F in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed

Dismantling of timber scantlings unframed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section description complete all as specified and directed.

M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed

Dismantling of wall and ceiling boards any thickness of any description including frames & cover fillets complete all as specified and directed.

S&F False ceiling using E- grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm x 3mm using 4mm thick high pressure stream cured classic variant E-board, designer pattern (ISI marked, IS No 14862-2000) fibre cement E board to be placed in the grid suspended by 4mm GI wire hangers from the purlins of the roof with butter fly clips, complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting outin hard/dence soil complete all as specified and directed.

M & L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations,filling and mass concrete complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M & L for pre-cast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in solid block masonry exc 10cm in width and setting in CM (1:4) complete all as specified and directed.

Demolition and breaking up drain pipes 150mm dia (salt glazed ware, AC or reinforced concrete ) set in cement mortar complete all as specified and directed

Material and Labour for laying of Double Wall Corrugated polyethelene (DWCPE) Sewage pipes line 150 mm Inner dia bore of pipe, class SN-8 including sealing of joints, fittings with collars etc complete all as specified and directed

M & L for Plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in bed to drain pipes 150mm dia bore including packing under and haunching against the sides and tested complete all as specified and directed

Returning,filling including, spreading, levelling , watering and well ramming inlayers not exceeding 25 cm in any type of soil complete all as specified and directed

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as directed.

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed.

M & L for surface Point Wiring with 1.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit with accessories on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following :-

One light / fan point controlled by one switch

One 3 pin socket out let 5 Amps on independent board

one 3 pin socket out let 5 A on same board

one Bell / Buzzer Point controlled by bell push

M&L for Preparation of new or untreated wooden surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

M & L for Surface Point Wiring with 2.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit with accessories on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.

S&F in repair Bib taps Fancy type, brass Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm dia bore or for brass ferrule etc complete all as specified and as directed

S&F LED batten with luminaire suitable for indoor applications, 20 Watts capacity, 4 feet long with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed.

S&F Decorative, wall mounting ,champagne gold finish fixture wit

S&F in repair Mixer for mixing hot and cold water, brass chromium plated screwed down for iron pipe 15mm dia bore etc complete all as specified and as directed

S&F LED batten with luminaire suitable for indoor applications, 10 Watts, 2 feet long with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed.

S&F in repair of Ding Dong bell, 230 volts AC, single pole all as specified and directed.

S&F in repair of bell push, flush type 5Amps all as specified and as directed .

S&F in repair of stepped type electronic fan regulator, flush Switch/socket type all as specified and as directed

h plastic body suitable for 9 watt LED lamp B22 base all as specified and directed.

S&F Switch piano, flush type, single pole one way, 5Amps all as specified and directed.

S&F in replacement of MCB SPN 240 volts 32/40 Amps, C curves complete all as specified and as directed

S&F in replacement of MCB single pole 240 volts 10/16/20/32 Amps, C curves, complete all as specified and as directed

S&F of Switch socket combination 2 in 1 , 5 Amps flush type all as specified and as directed

S&F in replacement of MCB Distribution Board, SPN 12 way, double door type 240 volts with 200 Amps rated busbar all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, steel wired connection pieces etc complete all as specified and directed at site .

M&L for Earthing with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long fixed by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber, pre cast slab 40mm thick in reinforced cement concrete (1:2:4) type B1 with 8 mm TMT bars reinforced at 10 cm centre to centre both ways, funnel with G I medium grade watering pipe, G I protection pipe, wire mesh and lugs, test point complete all as specified and as directed.

Supply and fixing LED bldg security light fitting 30 Watts with pressure die cast aluminium housing along with prismatic polycarbonate difuser with IP 66 protection including taking out old fittings complete all as specified and as directed.

S&F Bracket made out of G I tubing medium grade 25 mm dia bore, approx length 1.5 m long including M S clamps made out of M S flat iron 25 x 6 mm, nuts, bolts, washers etc including applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed.

Supply and fix Exhaust fan, metal body 300m sweep with blades, frame and louvers, AC single Phase, heavy duty, 230Volts including necessary core cutting in concrete / brick / stone wall for installation all as specified and directed .

S&F in repairs PVC Fresh air fan of 200/225mm sweep, 32 watts 1200/1400 RPM with louver complete including necessary core cutting in concrete / brick / stone wall for installation all as specified and directed. ( Make:- Havells model No. Ventil Air DX or equivalent make given in P S herein after)

M & L for sand cushioning with a layer of river sand 23 cm thick under and above the cable all as sper para 19.75 of SSR Part-I complete all as specified and as directed

S&F of Switch socket combination 2 in 1, 3 pin 5 and 15 Amps flu

S&L sub class 'B' burnt bricks for cable protection all as sper para 19.75 of SSR Part-I complete as specified as directed

Supply & Laying XLPE insulated screened PVC bedded galvanised steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 Core x 25 Sqmm connected with suitable lugs including taking out the existing unserviceable cable complete as specified as directed

40 mm dia

M&L for Preparation of old treated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with one coat of synthetic enamel paint etc complete all as specified and as directed