Providing and Fixing Solar Road Studs from Green Gate to Western boundary in VOCPA

Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self-illumination in active mode, 360 degree illumination and reflective panels with micro prism lenses capable of providing total internal reflection of the light entering the lenses face in passive mode. The product shall support a load of 13635 kg tested in accordance to MoRTH and ASTM D 4280 Type H. The product should be resistant to water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures in the range of -7°C to 70°C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm × 100 mm × 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to comprehensive strength as per MoRTH circular shall be obtained from the manufacturer and submitted to the engineer-in-charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.