SPECIAL REPAIR TO LIVING ACCN IN BLDG NO T 43 T 46 AND T 50 AT FASF PATTI AND OTHER SANCTIONED WORKS UNDER GE (WEST) FEROZEPUR CANTT

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed.

Surface dressing not exceeding 15 cm deep in soft/loose soil complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for taking out and laying UG cable and getting out, excavated earth, forming bottom surfaces to required level complete all as specified and directed.

Excavation in post holes (or similar holes) Each not exceeding 0.50cum, getting out in hard/dense soil, returning, filling, in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface in soft/loose soil complete all as specified and directed.

M&L cement concete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L PCC 1:4:8, type D2 (using 40mm crushed stone agregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L RCC 1:1½ :3 (using 20mm graded stone aggregate) in roof slab complete all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed.

M&L RCC 1:1½ :3 (using 20mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span and similar work complete all as specified and directed.

M&L reinforced cement concrete M-25 (using 20mm graded stone aggregatees) slabs supported on walls, beam and columns in floors, foos, landings, balconies, canopies, deck slab and in shelves and the like. complete all as specified and directed.

M&L use and waste of formwork to sides and soffits of floor or roof beams, beam similar work to rough finish surface of concrete flat complete all as specified and directed.

M&L RCC 1:2:4, type B1 (using 20 mm graded stone aggregate) precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete all as specified and direceted.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and direced.

M&L fine aggregate (sand) for cushioning by spreading leveling watering & well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

S&F mild steel bars 10mm dia and over, cut to length, bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L TMT mild steel bars 6mm to 8mm dia, as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

Demolition of brick work including all quoins, arches, pillars etc. but excluding ashlar facings built in cement mortar complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per ser item No 19 here-in-before but using old bricks retrieved from dismantling under ser item no 18 here-in-before including cleaning and removal of mortar from old bricks etc.

M&L for half brick thick work with sub class "B" bricks built in cement mortar 1:4 complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed.

M&L 50 mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in sub base of floor complete complete all as specified and directed.

M&L providing PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast block, copings, bed plate, hold in down blocks complete all as specified and directed.

M&L non-skid ceramic tiles coloured 7 mm to 8 mm thick (square/ rectangular), premium quality area of Each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bedding 15mm thick in cement mortar 1:6, complete all as specified and directed.

M&L non-skid coloured ceramic tiles of 7 mm to 8 mm thick , area of Each tile exceeding 0.06 sqm but not exceeding 0.11Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the colour over a screed layer of 15 mm thick in cement mortar 1:6, complete all as specified and directed.

M&L glazed ceramic coloured (colour & shade as approved) tile 350mmx250mm/450mmx350mm and 7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar 1:4 and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified and directed.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 12 mm thick rendering on wall in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement and preparation of new plaster surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on any face of brick walls or conrete surfaces, surfaces finished fair and even complete all as specified and directed.

M&L 10mm thick rendering in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick/concrete work surfaces mixed with integral water proofing compound all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Notes: (i) WPC shall be measured and paid for separately as 'Supply only'item. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instructions.

M&L 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfasces complete all as specified and directed.

M&L 15mm thick external rendering on fair faces of brickwork or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L 12mm thick internal rendering on any faces of brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth without using extra cement including and preparation of new plaster surfaces of wall and applying two coats cement based paint over one coat alkali resistant priming paint complete all as specified and directed.

M&L 5 mm thick rendering in cement mortar 1:3 in ceiling on fair faces of brick work or concrete surfaces is to finished even and smooth(without using extra lime or cement complete all as specified and directed.

M&L 5mm thick rendering in cement mortar 1:3 on ceiling surfaces and finished even and smooth without using extra cement and preparation of new plastered surfaces of ceiling and applying three coats white wash complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, omplete all as specified and directed.

Dismantling of steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F framed work such as grills,gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors framed balausters, walk ways,railings, framework of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and directed.

S&F Mild Steel work as in roof truss (framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (Beam tee, angle channel or flat sections) inclusing distance pieces, cleats etc Fe 410-W (Gde E-250) quality B complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Make: Rajshri or equivalent as approved.

S&F factory made 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified and directed.

S&F factory made 35mm thick glazed and skeleton shuttersof 2nd class hard wood with or without shash bar (hollock) open rebated and prepared to receive glass, gauze etc devided into square with plain chamfered or rounded and rebated sas bar (any no of bars)for securing glass, gauzed etc sizes of members of shutters as specified in SSR Part-1 sec-8 clause 8.20(a) complete all as specified and directed.

S&F 105mm x 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F 125mmX60mm pressed steel frames made of 1.25 mm thick MS sheet of profile for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

M&L complete removal of existing treatment on wall / ceiling surfaces, including cornices, pilasters, etc, by scrapping down with wire brushes and removing existing loose finishes, paricles, apply after finishing wall surface with wall care putty to get fair finish on that two coats of acrylic (100%) exterior emulsion paint over a coat of external cement primer complete all as specified and directed. Note: Necessary form work/scaffolding all are included in the above quotated rate. Makes: Asian paints (Apex Ultima)/Berger paints (weather coat all guard)/Jenson & Nicholson (safe guard) Makes: Birla Wall care putty and JK White Putty etc..

M&L preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparing new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

M&L 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in Each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

M&L 100mm size extruded brass type B-21 butt hinges with Aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

M&L 125 mm long aluminimum handles cast type, anodised complete all as specified and directed.

M&L 150 mm long aluminimum anodised barrel tower bolt complete all as specified and directed.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed.

S&F 15mm bore bib tap fancy type of chromium plated cast copper alloy brass, screwed down screwed for iron pipe or for brass ferrule in repair complete all as specified and directed.

S&F brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

S&F Brass chromium plated wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore stop valves bore fancy type, chromium plated, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions in repair complete all as specified and directed.

S&F 15mm bore chromium plated cast copper alloy 1-way angle cock with flange suitable for pipe, complete all as specified and directed.

S&F cabinet mirror 400mm x 500mm complete all as specified and directed. Make: Prayag Cat No. 554 or techno-commercially equivalent in approved makes

S&F PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.

S&F vitreous China wash down water closet pan (Pedestal pattern) white including 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed.

S&F vitreous China wash hand basin, white flat back size 550mmx400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed. Make : First quality in Hindware/Cera or equivalent in approved makes.

S&F wash hand basin, flat back 550mmx400mm vitreous China (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F vitreous China squatting pan, 'Orissa patteren, size 580 mm x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F 15 mm bore bib taps cast copper alloy with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and directed.

S&F chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges in repair complete all as specified and directed.

S&F Soap Dish of stainless steel (not less than 1mm thick) fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed.

S&F PVC waste pipe of standard pattern, not less than 75cm long , 32/40mm dia for steel sink waste coupling or urinal of suitable size complete all as specified and directed.

S&F galvanised steel tubing, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 15 mm dia complete all as specified and directed.

S&F galvanised steel tubing, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 20 mm dia complete all as specified and directed.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.

Taking up or down 15 mm existing steel tubing and connections and re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed. Note:- Cost of new fittings, if required shall deemed inclusive of quoted rates.

Taking up or down 20 mm existing steel tubing and connections and re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed. Note:- Cost of new fittings, if required shall deemed inclusive of quoted rates.

S&F ball valves of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Make: Prayag/ polytuf

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 20 mm dia complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 15 mm dia complete all as specified and directed.

M&L white color rotational molded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of the tank 500 ltrs including GI tank nipple of size 20/15 mm dia including dismantling of old water tank complete all as specified and directed.

S&F rotational water tank by providing new rotational moulded triple layered polyethelene water storage tank double layered ISI marked (Cylindrical verticle with closed top) hoisted and fixed in position all as directed of capacity 1000 litre including dismantling & taking out old unserviceable item complete all as specified and directed.

S&F stop valves 15 mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for pipe or for unions and fixed complete all as specified and directed.

S&F Brass chromium plated shower rose 125mm size complete all as specified and directed.

Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed.

M&L 150 mm bore PVC (SWR) pipe laid in trenches and jointed with cement mortar complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 110mm bore in any length with rubber ring joints laid in trenches or fixed to wall with clamp and using solvent solvent complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75mm bore in any length with rubber ring joints laid in trenches or fixed to wall with clamp and using solvent solvent complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 150 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends with access doors any radius complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 150 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 75 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F 150 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction single, (single T) equal or uequal provided complete all as specified and directed.

S&F 75mm dia PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 150 mm dia PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.

M&L PVC (SWR) gully trap in repair 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L 150 mm bore (internal dia of pipe) salt glazed stoneware drain pipe grade A laid in trenches and jointed complete all as specified and directed.

M&L PCC 1:3:6, type C2 (using 40 mm graded aggregate) as in concrete bed to 150 mm bore drain pipe incl packing under hunching against the sides of pipes after pipe laid and tested complete all as specified and directed.

M&L RCC 1:2:4, type B1 (using 20mm graded stone aggregate) Precast cement concrete as in cover slab for man hole and similar article with plain face. Set in cement mortar 1:4 complete all as specified & directed.

M&L cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) for 150 mm dia pipe in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified & directed.

M&L hardcore of broken bricks of gauge not exceeding 63mm, deposited spread and leveled in layers not exceeding 15cm thick watered and rammed to a true surface below interlocking tiles and in sunken floor complete all as specified and directed.

M&L 75mm thick hardcore of of gauge not exceeding 63mm graded stone aggregates, deposited spread and leveled in layers not exceeding 15cm thick including watering and rammed to a true surface complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L 50 mm PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channel / drains complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth cement concrete using extra cement including forms moulds mitred and stopped ends etc complete all as specified and directed.

M&L precast machine pressed cement concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade, with grey cement and pigment laid dry over a layer of 25 mm thick sand cushioning complete all as specified and directed.

M&L precast machine pressed precast 60mm thick concrete interlocking paver blocks (M-35) cement concrete tiles confirming to IS 15658-2006 with grey cement and no pigment of approved design and pattern as approved by GE laid dry over a layer of 50 mm thick sand cushioning complete all as specified and directed. Note: Sand will be measured and paid for separately under respective item.

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in kerbs, rounded or chamefered on edges complete all as specified and directed.

S&F rolled sections fixed independently as in post/ pillers where connnected with angle cleats or other connecting plates etc, of Fe 410-W (Gde E-250) Quality 'A' including fabrication, erraction and fixing complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails trussed, purlin, crane gantries , including distance pieces , cleats etc. of Fe 410-W (Gde E-250) quality 'A' including fabrication, erraction and fixing complete all as specified and directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment and fixing complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed bolt ends,Each screwed end to be fitted with washers and one hexagonal or square nut,exc 5 cm long and n.exc 10 cm long and dia of shank 11 to 15 mm etc complete all as specified and directed.

S&F Pre-painted galvalume alumimium zinc coating GI based corrugated/crimped steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa in roof covering, fixed with self tapping screws complete all specified and directed.

All as per ser item No 127 here-in-before but plain sheet.

Taking down chowkkats or frames area not exceeding 1.5 Sqm Each( Without taking off shutters from the frames) acomplete all specified and directed.

All as per ser item No 129 here-in-before but exceeding 1.5 Sqm and not exceeding 4.0 Sqm

M&L cutting holes in brick wall exc half bricks but not exc one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required complete all as specified and directed.

S&F factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to Each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to Each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F 300mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed.

S&F mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, complete all as specified and directed.

S&F 200 mm MS barrel tower bolts stone enamelled black with bright bolt and fixed complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring as fixed in repair complete all as specified and directed.

M&L galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples in repairs complete all as specified .

Hacking out old broken glass from metel frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new complete all as specified and directed.

Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L sand filling under floors or in foundations or under interlocking paver blocks including watering and consolidation complete all as specified and directed.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Gypsum board 6mm-7mm thick in ceiling fixed with screw 60cmx60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm, Sub tee 23mmX23mm) including aluminium anodised snap grid frame 605 mm X 605 mm for false ceiling including hanging arrangement complete all as specified and directed.

Demolition of boarding of any description and in any position complete all as specified and directed.

S&F 16 mm - 18 mm solid PVC board plain colour, fixed with screws or adhesive with complete accessaries as in shutters and shelves with rebates fixed on PVC Solid patter of Size 40mm x 18mmx 500mm on three sides complete all as specified and directed.

S&F continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified and directed.

S&F 100mm long, hasp and staple of aluminium anodized, safety type, fixed with screws complete all as specified and directed.

S&F 100mm long extruded anodised aluminium alloy handles, fabricated type complete all as specified and directed.

Dismantling plain or corrugated AC/fibre sheet on roof covering complete all as specified and directed.

S&F mild steel screw bolts of 12 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, Each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exceeding 15cm and not exceeding 22.5cm long complete all as specified and directed.

S&F steel curtain rod Grade 'A' quality with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and directed.

S&F 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified and directed.

S&F 15mm bore pillar tap, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, in repair complete all as specified and directed.

S&F 125mm dia chromium plated grating doom with waste hole of PTMT (minimum weight 40 gms) in repair complete all as specified and directed

S&F 600mm long chromium plated towel rail fixed to wall with steel screws and PVC rawl plug complete all as specified and directed.

S&F 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union in repair complete all as specified and directed.

S&F PVC connection 15mm x 600mm size with PTMT nutsin repair complete all as specified and directed.

S&F 3.15mm dia plain mild steel wire, galvanised class 3 as for mosquito nets and fixing to straining bolts, hooks, eyes, etc including straining and fixing to wood, concrete or steel posts or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. complete all as specified and directed. Note: Each line of wire to be measured.

Taking down carefully Copper/Aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends, reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks (for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 Amp socket outlet independent controlled by one single pole 5 Amp switch.

All as per ser Item No. 165 here-in-before but one three pin 15 Amp switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

S&F switch piano flush type single pole one way 5/6 Amp complete all as specified and directed.

S&F switch piano flush type 15 Amp, single pole one way complete all as specified and directed.

S&F Socket outlet 2 in one , 5/6 Amp flush type complete all as specified and directed.

S&F Socket outlet, 2 in one 6 pin 5 and 15 Amp piano flush type complete all as specified and directed.

S&F ceiling rose, PVC/Polycarbonate, isolated three terminals complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate, isolated with back plate suitable for batten fittings including 10 Watt LED Bulb complete all as specified and directed.

S&F stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as required in repair complete all as specifed and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 Volt, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) including taking down old conventional fan complete all as specified and directed. Note :- Old conventional fan to be depoisted in AGE E/M (W) Office.

S&F LED tube light fitting 1 X 18 Watts decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230 Volt, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Cat Part No LHEXBLP7UN1W018 of Havells or techno-commericially equivalent in approved makes

S&F LED street light fitting 35 Watt 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 Volts 200 Amp rated bus bar, Neutral link, Earth bar and Din rail, 12 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F MCB, Single pole 240 Volts, 6 Amp - 32 Amp 10 KA 'B Series complete all as specified and directed.

S&F MCB, Single Pole and neutral 240 Volts, 63 Amp 10 KA 'B' series complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amp rated bus bar, Neutral link, Earth bar and Din rail, 8way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F MCB, Single Pole and neutral 240 Volts, 63 Amp 10 KA 'B' series complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase 230 Volts of size 300m sweep with, blades, and frame and louvers complete complete all as specified and directed.

S&F 1100 Volts grade heavy duty 10 Sqmm two core cable PVC insulated aluminium Stranded conductor, served with inner shething of PVC sheathed in service conections suspended by insulating hangers and procelean beat not more than I metre apart including 4sqmm suspension wire, one twin core cable flat or circular complete all as specified and directed.

M&L Earthing complete with galvanized steel plate elecrode of size 60 cm x 60 cm and 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 meter below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate). The chamber shall be constructed one metre away from edge of earth pit 50 mm thick pre cast cover of cement conrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 Volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 16 Sqmm 2 core confirming to IS : 7098-1985 laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified and directed.

S&F Galvanized steel tube 40 mm dia light grade for protection of cable complete all as specified and directed.

M&L sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed.

Supply and lay bricks of old size sub class 'B' type for protection of Underground cable in trenches all as specified and directed.

ABHISHEK AND COMPANY

M/S N Maini Constrution

B.L. Chaudhri and Co.

Manjeet Singh Contractor

M/s Sarup Singh