MISC CERTAIN B/R REPAIRS INCLUDING SECURITY FENCING, STEEL GATE ETC IN AGE BR II AREA UNDER GE SAUGOR

Amount

Dismantling posts or struts (wood,steel or RCC ) in natural ground any section ,including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling of barbed wire of any thickness or size complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed

Dismantling framed timber scantlings 40 sqcm & over in section, in any position complete all as specified and directed.

Dismantling of wall ceiling board (fibre,pulp,insulation etc)or insulation board/slab/blankers,any thickness including cover fillets complete all as specified and directed.

M&L for 600mm x 600mm x 8mm to 10mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles laid over and including15 mm thick screed bed in CM (1:6) including dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises complete all as specified and directed.

All as per Srl item No. 6 above but in dado / skirting laid over and including 10mm thick rendering in CM (1:4) -ditto-

M&L for brickwork with subclass 'B' bricks old size, straright or curved on plan exc 6m mean radius built in CM(1:6) including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings laid in layers not exc 15cm thick spread levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of gauge not exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L PCC 1:4:8, type D2 (using 40 mm graded stone aggregates), 100mm thick as in sub base complete all as specified and directed.

M&L for PCC1:2:4, type B2 ((using 40 mm graded stone aggregates) as in foundations filling and mass concrete complete all as specified and directed.

M&L for rendering 15mm thick on surface other than fair face of brickwork with CM 1:6 surface finished even & fair complete all as specified and as directed

M&L for applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of synthetic distemper over a coat of interior primer including preparation of new wall surfaces of walls complete all as specified and directed.

M&L for applying two coats exterior weather coat over one coat of exterior primer including preparation of surfaces of new walls complete all as specified and directed. Make:- Asian ACE or equivalent make as approved by GE

Surface excavation not exc 30cm deep & averaging 10 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for site clearance in soft/loose soil complete all as specified and directed..

Excavation in post holes (or similar holes ) each n.exc. 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cum, watering and removing, surplus soil to distance not exc, 50 mtr and making good surfaces in soft/loose soil complete all as specified and directed..

M&L for PCC (1:4:8), type D-2 (using 40 mm graded stone aggregates) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC (1:3:6), type C-2 (using 40 mm graded stone aggregates) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC (1:2:4), type B1 (using 20mm graded stone aggregates) as in embedding of chain link fencing, rounded or chamfered on edges including necessary formwork complete all as specified and directed.

S&F angle iron fencing posts including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 10 mm dia mild steel plain round bar as in line wire for chain link fencing complete all as specified and directed..

Supply only mild steel galvanized chain link fencing of 4mm dia wire and 75mm X 75mm mesh size complete all as specified and directed Make:-TATA/SAIL/JINDAL

Fixing of chain link fencing including line wires any mesh size & type to any type of standards rail straining bolts ect. Including provision of binding wire complete all as specified and directed

S&F mild steel screw bolts dia of neck 5 to 10 mm dia (machine made) with hexagonal or Square heads at one end and screwed the other or screwed both nds, each screwed end to be fitted with washers and one hexagonal or Square nut, length of bolt not exc. 5 cm, complete all as specified and directed.

M&L for applying two coats synthetic enamel paint over a coat of red oxide primer on steel surface of width or girth exc 10 cm complete all as specified and directed.

M&L for applying two coats synthetic enamel paint over a coat of red oxide on steel surface width or girth when un connected with other painting or when painted in different tint of width or girth not exc 10 cm complete all as specified and directed

S&F galvanized 2 strand, 2.00 mm dia steel barbed wire with 2mm dia barbs at 75mm (approx) spacing & straining & fixing to any type of post straining bolts including securing or tying at crossing with and provisions of galvanized mild steel wire staples or steel pins etc. complete all specified & directed (Each row of wire to be measured for the purpose of payment, no separate payment shall made for mild steel tying wire staple/pin.

S&F steel work in purlins/rafters/posts with round/rectangula/square hollow mild steel section complete all as specified and directed.

S&F mild steel plates (plain or chequred) channels, square cut or notched forming holes, with riveted, bolted, welded attachement conforming to Fe 410 - W (Gde-E-250) quality-B complete all as specified and directed..

S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long dia of shank 16 to 20 mm complete all as specified and directed..

S&F MS screw bolts machine made with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 16 to 20mm and length exc 22.5cm and not exc 30cm complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern with guard film of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed. Make:- Durashine mfg by TATA Blue Scope Building Product or equivalent make as apporved by GE

S&F 0.45 mm thick galvalume sheet precoated coloured ridge suitable for profile pattern sheet fixed with self driving screws including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof and taking down carefuly etc. complete all as specified and directed Make:- Durashine mfg by TATA Blue Scope Building Product or equivalent make as apporved by GE.

S&F mild steel work like flat iron including all necessary drilling,screwing, bolting , reveting & welding, etc and similar work conforming to Fe-290 Gde E-165 for wind ties,gutter strap and frame for cladding complete all as specified and directed.

S&F mild steel framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks ,cattle traps & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M&L for Armstrong mineral fibre acoustical suspended ceiling system with dune supreme (Beveled Telgular) Edge tiles with armstrong silhouette black reveal 15mm exposed grid ,tiles should have humidity resistance (RH) of 99%,NRC 0.5 ,Light reflectance >83% ,Thermal conductivity K=0.052-0.057 w/m K ,colour white ,fire performance UK class 0/class 1 (BS 476 pt-6&7) in module size of 600x600x15mm with bio block coating on the face of the tile ,suitable for green building application ,with recycled content of 38-41% .The tile shall be Armstrong silhouette black reveal profile grid system with 15mm white flanges incorporating a 6 mm central reveal in white /black and with a web height of 38mm and a load carrying capacity of minimum 15.68kgs/M2 .Silhouette ,main runners &cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions .The T section have a Galvanizing of 90 grams per metre square .The tile and grid system used together should carry a 15 year warranty . Installation :To compose main runner spaced at 1200 mm centre securely fixed to the structual soffit using suspension system at 1200mm maximum centre .The first /Last suspension system at the end of each main runner should not be graeter than 450 mm from th adjacent wall .Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600mm module ,cut cross tees longer than 600mm required independent support 600x600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.

A Raza Enterprises

maharaja construction and suppliers