PETTY REPAIR AGAINST DAY TO DAY COMPLAINS IN POCKET 9 IN B R III UNDER GE ROORKEE REPAIR MAINT TO PLUMBING SANITARY FITTINGS TILLING AND ALLIED WORKS IN POCKET 9 IN AGE B R III SAHARANPUR UNDER GE ROORKEE REPAIR MAINT TO FLOORING PLUMBING JOINERY SAN

Amount

S&F in repairs of bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed of 15 mm bore complete all as specified and directed. (Make : Prayag/ Polytuf).

S&F in repairs Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-110gms)) Make: Prayag/ Polytuf

S & F in repair 15 MM bore stop valves/ angle valve of PTMT screwed down high pressure, with crutch or capstan head screwed both ends ( minimum weight 110 Gms) complete all as specified and directed.

S&F shower of PTMT any colour including shower arm 125mm size 15mm bore pipe complete all as specified and directed. Make: Prayag/ Polytuf

S&F in repairs PTMT waste fitting 32mm bore for WHB complete all as specified. (Make : Prayag/Symet/Polytuf). Minimum weight 45 gms.

S&F in repair ball valves of 15 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and directed. Make: Prayag/ polytuf

S&F in repair ball valves of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and directed. Make: Prayag/ polytuf

S&F in repairs bib tap ISI marked cast copper alloy with crutch or butterfly handle screwed down high pressure and screwed for iron pipe of 15mm bore complete all as specified.

S&F in repairs stop cock 15 mm bore ISI marked cast copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs stop cock 20 mm bore ISI marked cast copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs bib tap 15mm dia cast iron plug type with brass spindle confirming to relevant IS complete all as specified.

S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified.(Make : Prayag / Essco of Jaquar)

S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified.(Make : Jaquar Cat No. QQT-7037)

S&F in repairs 15mm dia brass chromium plated sensotronic sensor faucet for wash basin complete all as specified. (Make : Jaquar Cat No. SNR-CHR-51021).

S & F in repair sensotronic concealed type flushing valve for urinal complete set complete all as specified. (Make : Jquar cat No. SNR-CHR-51087).

S & F in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.. (Make : Jaquar Cat No. QQT-7169B).

S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified.(Make : Prayag Cat No. 7906-F)

S&F in repairs 15mm dia brass chromium plated pillar tap with fly nuts capstan head screwed down high pressure with or without lettered hot or cold with long screwed shank complete all as specified. (Make : Prayag / Essco of Jaquar).

S & F in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed. (Make : Prayag Cat No. 7950).

S & F in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed (Make : Prayag,Essco of Jaquar)

S&F in repairs chromium plated cast copper alloy stop cock fancy type (concealed type)screwed both ends high pressure for 15mm bore size iron pipe or ferrule complete all as specified . (Make : Prayag, Essco of Jaquar)

S&F in repairs chromium plated cast copper alloy angle cock with flange suitable for 15mm bore pipe, complete all as specified(Make : Prayag cat No.7910-F )

S&F in repairs chromium plated cast copper alloy 2-way angle cock with flange suitable for 15mm bore pipe, complete all as specified(Make : Jaquar cat No.QQT 7041 )

S&F in repairs chromium plated cast copper alloy angle cock with flange suitable for 15mm bore pipe, complete all as specified(Make : Jaquar cat No.QQT 7053 )

S & F in repair wall mixer with 'L' bend (Provision for OH shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete (Make : Prayag cat No.7975 )

S & F in repair wall mixer with 'L' bend (Provision for OH shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete (Make : Jaquar cat No.QQT - 7219 )

S & F in repair wall mixer Telephonic with crutch (Provision for hand shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete (Make : Prayag cat No.7970-F )

S & F in repair wall mixer Telephonic with crutch (Provision for hand shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete (Make : Jaquar cat No.QQT 7267 )with expended shower pipe 16mm size 1375x375mm with wall brakets cat No. SHA 1211 & shower rose 150x150 cat No. OHS - CHR 1605

S&F in repairs hand shower with 1.2 Mtr flexible tube and hooks complete suitable for 15mm bore pipe complete all as specified. (Make : Prayag cat No. BH-79S)

S&F in repairs CP brass shower rose 125mm size with shower arm suitable for 15mm bore pipe complete all as specified. (Make : Prayag, Essco of Jaquar)

S&F in repairs CP brass shower rose 150mm size shower with 300mm arm suitable for 15mm bore pipe complete all as specified. (Make : Prayag cat No. BS-79S)

S&F in repairs health faucet with (1.5 Mtr tube & hooks ) complete all as specified. (Make : Prayag Cat No.455)

S&F in repairs Jet Spray with (1.5 Mtr tube) complete all as specified. (Make : Prayag Cat No.522)

S&F Cabinet Mirror (400mm x 500mm) complete all as specified. (Make : Prayag Cat No.554)

S&F in repairs PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified.

S&F in repairs waste fitting (coupling) brass chromium plated 32mm dia for WHB complete all as specified and directed

All as per item No 36.00 above but for stainless steel sink of size 40/50 mm complete all as specified and directed

S&F Glass shelf 500x60 mm (with ABS Brackets) 450x125x6 complete all as specified and directed. (Make : Prayag Cat No.BEA-47)

S&F corner Glass shelf 300 mm (with ABS Brackets) 300x600 complete all as specified and directed. (Make : Prayag Cat No.BEA-46)

S & F Stainless steel plate rack using 0.63 mm th stainless steel sheet. Make : Blue Star, Model KPR 317 of size 36"x36"10" complete all as specified and directed

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified (Make- Hindware, Cera, Prayag).

S&F in repairs PVC syphon complete for low level flushing cistern complete all as specified.

S&F in repairs flush handle PVC with adjustable lever and hook for low level flushing cistern all as directed.

S&F in repairs PVC flush pipe of 32mm dia pipe for connecting low level flushing cistern incl jointing to WC complete all as specified.

S/F in repairs brass spindle suitable for 15mm bib cock/stop cock/angle cock/CP pillar cock / stop cock concealed type all as directed.

S&F in repairs 32mm bore and 75cm long PVC waste pipe for WHB complete all as specified. (Make : Prayag/ Polyplast).

S&F PVC waste pipe of standard pattern, not less than 75cm long , 32/40mm dia for steel sink waste coupling or urinal of suitable size.

Dismantling and S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed of capacity 500Ltr Capacity.( Make - Sintex)

Dismantling and S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed of capacity 1000Ltr Capacity.( Make - Sintex)

S&F in repairs HDPE PVC lid (cover) for 500 Ltrs capacity PVC tank complete all as specified and as directed

S&F in repairs HDPE PVC lid (cover) for 1000 Ltrs capacity PVC tank complete all as specified and as directed

Taking up or down 15mm steel tubing and connections incl cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20mm steel tubing and connections incl cleaning for re-fixing or removal to store complete all as specified and directed.

S&F tubes med grade 15 mm bore galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F tubes med grade 20 mm bore galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only tubes and connections any grade in new or old position to walls, ceiling or laying in floors of 15 mm bore complete all as specified and directed.

Fixing only tubes and connections any grade in new or old position to walls, ceiling or laying in floors of 20 mm bore complete all as specified and directed.

S&F in repair small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union etc for 15mm bore pipe (ISI marked) complete all as specified and directed.

S&F in repair small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union etc for 20mm bore pipe (ISI marked) complete all as specified and directed.

S&F in repairs stainless steel sink, 1.00 mm thick for kitchen or laboratory with plug waste pipe washers, incl cantilever cast iron brackets, connecting union, waste coupling etc overall size 495x420 mm with bowl size 410x330x160 mm complete al as specified and directed

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wastes coupling incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410x330x160 mm complete all as specified and directed

S&F in repairs plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair size 580x440mm white with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush).

S&F in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified.(Make : Hindware/Cera- Ist quality).

M&L Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 15 mm dia complete all as specified and directed.

M&L Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 20 mm dia complete all as specified and directed.

Hacking out old broken glass of any thickness/size or quality from wooden/metal frame fixed with putty/beading & S&F 3mm thick sheet glass, plain ordinary quality not exc 0.5sqm in each pane with and incl putty/beading complete all as specified.

S&F 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed.

S&F 3mm thick pin headed sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staple etc.

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tied tacks or galvanised wire staple etc to wooden/steel doors/windows incl wooden beading/ putty complete all as specified and directed.

S&F in repairs Grating doom 75/100 mm dia of PTMT( with or without hole) (Minimum weight 25 gms) complete all as specified and directed.

S&F in repairs Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F in repairsordinary rat tail rod pattern springs including roller and roller plate incl fixing to steel frame or to wooden frame complete all as specified and directed

S&F in repairs towel rail 600mm long 20mm dia aluminium anodised fixed with wooden gitties or embedded in cement mortar (1 : 3) with steel screws etc, complete all as specified.

S&F in repair 19 to 20mm bore coloured PVC coated steel pipe of required length for curtain rod etc complete .

S&F in repair colured steel curtain rod brackets and colured PVC end knob suitable for 19mm/20 mm bore curtain rod complete as directed.

S&F in repairs 300mm MS sliding door bolts, plate type, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repairs 100mm size of butt hinges, medium weight cold rolled mild steel complete for door etc with welding to steel chowkhat at any floor up to four storied bldgs and making it functional complete all as specified and directed.

S&F 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

S&F 150 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

S&F in mild steel pressed handles, 150mm long, oval type, stove enameled black complete all as specified and directed.

S&F mild steel barrel tower bolts, stove enameled black with bright bolts and fixed 150mm long bolts in repair complete all as specified and directed.

S&F MS pressed handles oval type stove enameled black, 150mm size as in repair. complete all as specified and directed.

S&F MS pressed handles oval type stove enameled black, 100mm size as in repair complete all as specified and directed.

S&F in repairs 75mm long MS handles galvanised/ stove enameled for steel windows incl fixing with screws and welding the fixing plate if reqd complete all as specified and directed.

S&F in repairs 100mm size mild steel stove enameled black hasp and staple all as directed.

S&F in repairs 300mm size of bolt aluminium anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete complete all as specified and directed.

S&F in repairs 125mm size aluminium anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified and directed.

S&F in repairs 125mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

S&F in repairs 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

M&L for repair to aluminium door of n.exc 2 Sqm incl taking down and making adjustment to floor springs and re-fixing complete as directed

Easing of wooden window shutters/CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt etc complete all as specified and directed.

Easing of wooden door shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt etc complete all as specified and directed.

Re-securing the wooden beading and tightening of GI/steel wire mesh including nails/screws etc complete (one unit shall comprise for one door shutter or one window shutter irrespective of number of leaves) complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed

M&L for welding in repairs exc 2.5 cm & n exc 5 cm in length and thickness of metal to be welded exc 9mm but n exc 20 mm complete all as specified and directed

Taking down cement or cement lime plaster etc incl raking out joints, hacking for keys scrubbing down with water etc complete all as specified and directed.

M&L for rendering 12 mm thick cement plaster on brick or concrete surfaces in CM 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster on ceiling surfaces in CM 1:4 complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for complete removal of old existing treatment on walls, cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds, moss and efflorescence salt and trading oil decorated surface of walls and applying a coat of wall care putty of approved make as on wall surface and two coats of oil based distemper (white or tinted) complete all as specified. Make (Asian/Berger/Neorolac)

M & L for Preparation of old surfaces of wall by Washing , rubbing down and stopping of distempered and apply one coat of oil bond distemper on wall including curing complete Make (Asian/Berger/Neorolac)

M&L for light colour (Digital colour) Vitrified Ceramic tiles 10 mm hick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade incl 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed. ( Make- Kajariya, Somany, Johnson) .

M & L for 350x 250x 7 mm/ 450X 350X 7mm thick glazed coloured (Digital colour) ceramic tiles on vertical surface of such as skirting, dados and risers to steps etc., including 10mm thick rendering in CM 1:3 on brick or concrete surface finished rough to received dado/ skirting, set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed.( Make- Kajariya, Somany, Johnson)

M&L for glazed ceramic tiles (200mmx300mm) x 6 to 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick cement back coat in CM 1: 6 as on vertical surfaces such as skirting, dados, including dismantling of old tiles etc complete all as specified and directed.

M&L for Coloured (Digital colour) Non skid ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm and not exc 0.18 sqm, in floors etc. including 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finish, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed. ( Make- Kajariya, Somany, Johnson)

M&L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 Sqm but n. exc. 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in colour to match, over and incl 20 mm thick screed bed in CM 1:6 , including dismantling of old tiles complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25 mm thick over 20 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, including dismantling of old tiles complete all as specified and directed

M&L for Kota stone slab 20-25 mm thick in skirting, etc over 15 mm thick cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, including dismentling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed.

M&L for Coloured heavy duty parking tiles tiles 10 mm thick area of each tile exceeding 0.09 sqm and not exc 0.18 sqm, in floors etc. including 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finish, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed. ( Make- Dura Stone,Kajariya, Somany, )

M&L brick work with sub class B brick straight or curved on plan exc 6 m mean radius built in cm 1:6 including demolition of old brick work complete all as specified.

M&L for Cement concrete type B2 1:2:4 (40 mm graded aggregate) 75 mm thick as in floor and pavings finished even and smooth without using extra cement, including roughening of old surface complete.

Taking down wooden chowkhat or frames including shutters n.exc 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down wooden chowkhat or frames including shutters area exc 1.50 Sqm but not exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description n.exc 1.00 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1.00 and n.exc 2.00 sqm each complete all as specified and directed.

Taking down shutter of any description exc 2.00 sqm each complete all as specified and directed.

Re-fixing in same opening includes taking down, easing and adjusting and also re-fixing builders hardware as required including renewal of unserviceable screws, etc. shutter of any description n.exc 1.00 Sqm each complete all as specified and directed.

Re-fixing in same opening includes taking down, easing and adjusting and also re-fixing builders hardware as required including renewal of unserviceable screws, etc. shutter of any description exc 1.00 and n.exc 2.00 Sqm each complete all as specified and directed.

Re-fixing in same opening includes taking down, easing and adjusting and also re-fixing builders hardware as required including renewal of unserviceable screws, etc. shutter of any description exc 2.00 Sqm each complete all as specified and directed.

M&L Second class hard wood plain, solid, straight chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F 2nd class HW Glazed and skeleton shutters , 35 mm th, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24(a); supplied and fitted to chowkhat complete all as specified and directed.

S&F of 2nd class hardwood 35 mm thick plain framed, paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm the veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd Class H.W Glazed and skeleton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chamfered or rounded mitred and rebated sash bars any member as in windows ventilator stiles and rails as specified in SSR Part I section 8 clause 8.24 (b) complete all as specified and directed.

M&L for preparation of wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of wooden surfaces of any description not otherwise described over 10 cm girth or width and applying a coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide mcomplete all as specified and directed.

S&F Providing and fixing "Rajshri" brand factory made PVC Flush Type Shutter of 18mm thickness Celluca PVC Ply Single size pre laminated as per manufacturer's specification and drawing including piano hinges of required size, 125 mm brass handles, 150 mm brass tower bolts and megnet catcher etc complete all as specified and directed

S&F Providing and fixing factory made PVC Shelf / Partition of required size consisting of panel of 18mm thick Celuka PVC Ply Single size pre laminated and for supporting the hold of Shelf / Partition and shall provided 3 edges in size 18mm x 18mm as per required length. The front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm width x 1mm thick PVC sheet using solvent cement etc. complete as direction of Engineer-in-charge, manufacturer's specification and drawing complete all as specified and directed

S&F 505x478x195 SS drawer basket/plate rack fixed in kitchen cabnit including rooler/sliding plates complete all as specified and directed.

M&L for Granite(of any type ) tiles /slab 20 mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing incl 20 mm thick screed bed in CM 1:6 , and dismantling of old tiles complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed.

M&L framed work such as grills etc with ends of bars shouldered and or riveted or forged into spike; framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0 complete all as specified and directed.

S & F 2nd class hard wood small fittings such as door and window stops and cleats including all necessary articles not exceeding 200 cu cm each complete all as specified and directed.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.(Make:-Rajshri,Sintex)

S&F Factory made solid panel PVC door shutter o 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame rails welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, and S&F in the frame at side as per specification and drawing.( Make: Rajshri, Sintex)

M&L PCC(1:3:6) type C-1 as in bed blocks for hold fast including necessary form work complete all as specified and directed.

S & F mild steel flat iron as in hold fast clamps small articles conforming to FE 290 GDE -E- 165 complete all as specified and directed.

S&F 25mm thick flush shutters, solid core construction of particle board core commercial type on both sides complete all as specified and directed.

S&F 20mm clean sawn boarding with butt joints, chamfered one side fixed in repairs to replace and or decayed boarding to patches including cutting out old, piecing, heading joins etc in cupboard shelve complete all as specified and directed.

S&F haps and staple, 75 mm long aluminium anodised, wire type including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F 40mm dia cupboard knobs, fixed with nuts screw and washer mild steel bright finished complete all as specified and directed.

S & F butt hinges extruded aluminium alloy with galavanised mild steel hinge pin anodised and fixed type 75mm size C22 complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 100mm size complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 75mm size complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 50mm size complete all as specified and directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed.

S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F mild steel sliding door bolts,300 mm long plate type, stove enameled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed.

M&L preparation of wood and wood base materials, new or old, of any description and girth, not otherwise described, and treating with creosote oil ends of posts, back of chowkhats,etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each complete all as specified and directed.

Ditto all as per BOQ item No. 158.00 above but treating small articles such as holdfasts, end of posts, backs of chowkhat, etc area n. exc. 0.1 sq m each, complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples as in repair complete all as specified and directed.

M & L for rendering 12 mm thick on wall in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement including taking down old cement plaster and Preparation of new plaster surfaces of wall and applying two coat of oil bond distemper complete all as specified and as directed by Engr -in- charge .(Make -BERGER, ASIAN PAINT OR NEROLAC)

M & L for rendering 12mm thick on wall in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement including taking down old cement plaster and preparation of new plaster surfaces of wall and applying three coats of white wash complete all as specified and as directed by Engr -in- charge .

M&L for rendering 15 mm thick in cement mortar 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) including taking down old cement plaster and preparation of new plaster surfaces of wall and applying two coats cement based paint over one coat alkali resistant priming paint complete all as specified and as directed by Engr -in- charge .

M&L for rendering 15 mm thick in cement mortar 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) including taking down old cement plaster and preparation of new plaster surfaces of wall and applying two coats white wash over one a coat of white wash complete all as specified and as directed by Engr -in- charge .

M & L for rendering 5mm thick in cement mortar 1:3 on ceiling surfaces and finished even and smooth without using extra cement including taking down old cement plaster and preparation of new plaster surfaces of ceiling and applying three coats white wash complete all as specified and as directed by Engr -in- charge .

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L Cement concrete type B1 1:2:4 (20 mm graded aggregate) in floors and pavings 40 mm thick finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.

Glass dividing strips 3 mm th and 38 mm wide inserted in position confirm to design complete all as specified and directed.

M&L Cement concrete type B-1 1:2:4 (20 mm graded aggregate) in floors, plinth protection and pavings 50 mm thick finishing cement concrete surface even and smooth using extra cement including construction joint 10 mm width and 50 mm depth

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.completeall as specified

M&L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in leveling courseat roof padding complete all as specified.

M&L for Taking down existing roof treatment from roof and cleaning with wire brush to remove all loose particles and washing with water including removing the debris up to 100M distance including picking, sweeping clean and washing down with water to remove dust & plastering in CM 1:3 , 15 mm average thickness over the roof surface using water proofing compound (including WPC @ 3% by weight of cement) as per manufacturer direction including finished even and fair without extra cement , complete all as specified and described as under :- (a) Preparation of surface and applying one coat of polymeric primer @ 0.30 kg/Sqm. (b) Supply & providing APP based polymeric water proofing membrane 3 mm thick of weight not lwss than 3.60 kg / sqm reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core including coating the surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified and directed . (c) Applying one coat of polymeric modified bitumen 85/25 @ 1.2 kg /sqm over with one coat of aluminium bituminous paint @ 0.20 kg/sqm shall be applied. NOTE :- The work of water proofing treatment shall be got executed through expert team of manufactures' or authorised applicator of manufacturer complete all as specified and directed by Engr - in - charge.

S&F powder coated Everest ceiling grid system of grid size 600x600 mm fixed to walls with rawl plugs and screws and hang to roof members with 4 mm dia GI wire comprising main tee of size 38 mm x 24 mm x 0.30 mm , Cross tee of size 28 mm x 24 mm x 0.30 mm and wall angle of size 24mm x 24 mm x 0.40 mm with and including S&F of 4 mm thick everst designer ceiling (E-board classic) board/ tiles for insulation and acoustic purpose 595 x 595 mm size fixed with staples on snap grid as in ceiling , including dismantling of old ceiling complete all as specified and directed.

Dismantling asbestos cement corrugated ,semi corrugated, ridge etc sheets in roof covering.complete all as specified and directed.

M&L 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs , wall etc fixed with J-type or cranked hook bolts complete all as specified and directed.

M&L asbestos cement serrated ridges for corrugated sheets or semi corrugated sheets fixed with L or J type or cranked hook bolts, complete all as spfd & directed.

Fixing only 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs , wall etc fixed with J-type or cranked hook bolts complete all as specified and directed.

Dismantling of unframed timber scantling Over 40 sqcm in purlins rafter etc, in any position complete all as specified and directed.

M&L for Second class hard-wood in scantlings Wrought Timber un- framed and fixed complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mass and efflorescent salts and trading oil and greasy spots and apply one coat of white wash complete

M & L for Preparation of old surfaces of wall all as per item No 180.00 here in before and apply one coat of cement base paint on wall including curing complete ( Make : Snowcem/Durocem/Crimocem)

JAIN BUILDERS

Nanda Brothers

sagar associates

RAM PRAKASH AND ASSOCIATES

M/s Inderlal