PETTY REPAIR AND CERTAIN B/R WORKS LIKE PLASTERING , CHAJJA REPAIR, INTERNAL WATER SUPPLY AND PETTY DAY TO DAY REPAIRS TO EXISITING WIRING, SWITCHES, SOCKETS, FITTINGS, AND SERVICE CONNECTIONS AND ALLIED WORK SERVICES AT CQAE (WE) BANGALORE UNDER GE

Amount

Schedule A Part I-B/R Works

Dismantling of plain or corrrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.

S&F prepainted galvalume alu zinc coating based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddding to wall, fix with self tapping screws with necessary washers/welding all as specified and directed. (The profile of the sheet as specifed and directed by Engr-in-Charge).

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & complete 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 using 12.50mm graded crushed stone aggregate all as specified and as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10mm thick backing coat in cement mortar (1:4) & complete, all as spd & directed.

M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough.

M&L for 20mm thick Granite( of any size) work in cooking plate form and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade .

M&L for Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L for glazed ceramic colour designer concept glazed ceramic tiles 450x350x7mm size as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc complete all as specified & as directed by Engr-in-Charge.

M&L for non skid coloured ceramic tiles area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in (1:6), complete all as specified and as directed by Engr-in-charge.

M&L for repairing of 40mm thick flooring in patches with PCC (1:2:4) 20mm graded stone agg. & finished even & smooth w/o using extra cement. . The rates include demolition of existing concrete complete all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mortar all as directed.

M&L for brick work with sub class 'B' bricks, straight of curved on plan exc 6M mean radius built in CM 1:6 complete incl demolition of brick work built in cement mortar all as specified & directed by Engr-in-charge.

M&L for brick work with sub class 'B' (old size) straight of curved on plan to any radius built in half brick wall using CM 1:4 complete all as specified & directed by Engr-in-Charge.

M&L for 15 mm thick cement plaster in CM (1:6) including finished even and smooth (without using extra lime or cement).

M&L for rendering 10mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Dismantling of old Ceiling boards (Fibre,pulp,insulation,etc) or insulation boards /slabs blankets,including cover fillets and frame work.

S&F of Armstrong Board 12mm thick in ceiling all complete as per manufacturer’s instructions .

S&F Anodized aluminium snap grid of size 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging all as specified in SSR and as directed by Eng-in-charge.

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description

All as per item No 21 above but exceeding 1.5 sqm but not exceeding 4 sqm

Taking down shutters of any description exc 1sqm and n.exc 2sqm each

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

S&F 30 mm thick flush shutter, soild core construction, with particle board core and plywood face panels, (membrane doors of any colour any Code/model name of Maxon doors only)all specified and directed.

S&F second class hard wood glazed and skeleton shutter for doors open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or mitered and rebated sash bars any number, edges or framing, plain chamfered or rounded fitted with beads for securing glass gauge size of members of shutters as specified in SSR part I factory made shutters of 35 mm thick all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with 19mmx19mm MS square tube. EPDM rubber gasket weather seal to be provided throughout the frame. The profile shall be mitre cut at two corners and joined by inserting 2mm of 150mm long brackets of 15x15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed. The door frame shall be fixed to the wall using 65x100mm long cdium plated screws through the frame by using PVC fasterness. A minimum of 06 Nos screws to be provided for each frame supplying & fixing in opening as per specified and directed Note : Cuting holes, providing cement concrete for holdfast finishing all disturbed surfaces (CM 1:4) around door frame etc are deamed in this item

S&F factory made Moulded solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for Top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lack rail & bottom rail on either side & as far insert for top rail & bottom rail ; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beating and joined together with solvent cement supplied and fixing in the frame at site including all fixture & fittings etc all as specified and as directed.

S&F 100 mm Stainless steel hinges of any colour all as specified & directed by Engr-in-charge

S&F 75 mm Stainless steel hinges of any colour all as specified & directed by Engr-in-charge

S&F Stainless steel barrel tower bolt 150mm of extruded section

S&F Stainless steel handle 150mm all as specified and directed by the engineer -in -charge.

S&F Stainless steel handle 100mm all as specified and directed by the engineer -in -charge.

S&F in repair 150mm floor door stopper of Stainless steel body ,fixed in floor all as specified and directed by Engr-in-Charge.

Easing of aluminium doors including taking out door shutters and changing of certain parts if required like pilots,hinges,rubber beadings etc as required and re-fixing in same position and size of doors n.exc 4 sqm each.

All as per item no 35 but for windows.

S&F powder coated aluminium annodised frame for door/window/ventilator with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

S&F aluminium annodised door/Windows/ventiliator shutters aluminium section weighing 0.55kg/m including necessary joining, fixed type, cleats, glazing clips, rubber neoprene packing, handles 02 nos in each door, hinges, anodised alumnium snap beading, screw etc, complete all as spd.

Taking down wiremesh any size

S&F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples .

S&F 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane.

S&F Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers.

S&F in repairs ISI marked hydraulically regulated door closer designation no.03 universal type,suitable for door shutters of 851 to 1000 mm in width and weight betwwen 61 to 80 kg width upto 1.50 mm mtr and weight between 61 to 80 kg complete all as specified and directed by Engr-in-Charge..

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-charge

S&F in repairs Mortise lock, vertical type, size100 mm four lever .

Easing of wooden window shutters/CB shutters (One unit shall comprising of one window/ CB/ Showcase/ irrespective of number of leaves) for properly closing/ opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc complete all as specified & directed by Engr-in-charge.

All as per srl item No 46 above but door shutter.

M&L for replacement of wooden glazing beading of 2nd class hard wood straight (any size) finished wrought for glazing or gauged joinery for fixing wire gauge/ securing glass pane complete all as specified and directed by Engr-in-Charge.

S&F in repair MS 180mm( Powder coated), ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

M&L for 3mm thick acrylic sheet n exc 0.50 sqm in each pane & fixed to steel window by drilling holes/punching/screwing fixed with beads with metal panel pins/spring clips in metal surrounds including taking down old glass with putty. Work to be carried out up to 12m height complete all as specified and directed by Engr-in-Charge.

M&L for Running welding in repairs on metal to be welded of thickness exc. 6mm but n.exc. 9mm including preparation of surface, etc complete all as specified and directed by Engr-in-charge.

S&F in repairs Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; etc including dismantling of old sections complete all as specified & directed by Engr-in-charge.

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type lockable cover complete all as specified and directed by Engr-in-Charge.

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type cover complete all as specified and directed by Engr-in-Charge.

S&F in repair for PVC tank cover as in PVC over head tank cover including cover to be fixed in frame with threading system. complete all as specified and directed. The cover to be provided 500/1000 ltrs capacity.

Removal of air lock/blockage of water in G I Tubing 15,20,25mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-Charge.

S&F Ball Brass valve 25 mm dia high pressure, with polythene float and flynut complete all as specified and as directed.

All as per item 57 above but 20 mm dia

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store.

S&F CPVC pipes 20 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

S&F CPVC pipes 25 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

Taking down and re-fixing of old steel tubing connection in new or old position (wall etc) including cleaning for re-fixing bore of pipe 15mm/20mm dia complete all as specified and directed by Engr-in-Charge. Note: - New GI fittings such as elbow, socket, Tee, Union, Nipple are included in rates if required for re-fixing of pipe.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge.

S&F in repair PVC(SWR) bends 110mm dia complete all as specified & directed by Engr-in-Charge.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (75 mm bore) including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge.

S&F in repair PVC(SWR) bends 75mm dia complete all as specified & directed by Engr-in-Charge.

S& F in repairs PVC (SWR) P trap 110/110mm bore, all as specified.

S&F in repairs PVC (SWR) S trap 110/110mm bore, all as specified.

S&F High density polyethylene pipes 50 mm bore of pressure ratings 6 kgf/cm2 fixed complete to walls,floors,ceiling etc. Including necessory fittings.

M&L for 75mm dia of outlet PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed by Engr-in-charge .

S&F in repair wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and directed by Engr-in-Charge.

S&F in repairs plastic EWC seat cover of white colour pedestal pan , closed pattern withg flat bottom & cover including MS chromium plated ,alum hinging devices complete all as specified and directed by Engr-in-Charge.

S&F in repairs 10ltr capacity PVC valve less syphonic action type flushing cistern low level white with inlet ball valve ,float & handle including brackets complete all as specified and directed by Engr-in-Charge

S&F PVC syphon kit for low level flushing cistern.

M&L in replacement of brass face spindle of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basin mixture and valve mixture of any description fixed in repairs complete all as specified and directed by Engr-in-Charge.(Suitable for make Jagur,Cera,Sieko and Zollota etc)or equivalent as approved by GE.

S&F in repair for vitreous china wash basin white flat back size 550x400 including cutting for and pinning in ends of brackets including of fixing of 32mm low density polylethyne pipes (LDPE)of pressure rating 6kg/cm2,coupling, PVC connection with 15 mm PTMT cheknuts, brackets all complete as directed by Engr in Charge.

S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats Minimum weight 300gms).

S&F in repairs CP Towel rail including fiitings of neccessary screws etc complete all as specified and directed by the Engr-in-Charge.Cera Model500103 or its techno commercial equivalent.

S&F in repairs CP Towel ring of including fiitings of neccessary screws etc.complete all as specified and directed by the Engr-in-Charge, Cera Model 500105 or its techno commercial equivalent.

S&F in repairs CP health fauccet of including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge.Cera Make-8030103 or or its techno commercial equivalent.

S&F in repairs Glass shelf of cera make including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge.Cera Model F-5005102 or its techno commercial equivalent.

S&F PVC Cabinet mirror (size 500x400mm) all as specified directed by engr in charge. Make: Prayag Cat No.556 or its techno commercial equivalent.

S&Fin repairs Basin mixer 15 mm dia Fancy type. Make:Cera model F-2008461or its techno commercial equivalent.

S&F in repairs swan neck Pillar cock CP 15 mm dia. Make:Cera F2008105(Right) or its techno commercial equivalent.

S&F in repair Waste coupling of CP ( half or full threaded) of 40 mm dia.

S&F as in repair 15mm dia PVC connection 450/600 mm long all as specified.

S&F in repairs PVC waste pipe 32/40 mm dia for urinal

S&F in repairs PVC waste pipe 32/40 mm dia for WHB/Sink

Taking down the existing bottle traps of wash hand basin refixing the same after cleaning including replacement of washers, packing etc if required complete all as specified & directed by Engr-in-charge.

S&F brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe or all as specified, fixed as in repairs complete all as specified and directed by Engr-in-Charge.

M&L in replacement of existing chromium plated grating of size 125mm dia (with hole or without hole) complete for Nahani/Floor traps and fixed as in repairs complete all as specified & directed by Engr-in-charge.

S&F in repair 70 mm long fancy type shower roses brass chromium plated with CP arms for 15mm bore GI pipe with 235 mm long shower arm complete all as specified & directed by Engr-in-Charge. Make:Cera Model F- 7020106 or its techno commercial equivalent.

S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Cera Model F3002152 or its techno commercial equivalent.

S&F in repair 15 mm dia bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make: Cera model No F2002161 or its techno commercial equivalent.

S&F in repair bib tap of PTMT any colour 15mm dia (Prayag or equivalent ) in repairs all as specified.

S&F in repair stop valve of PTMT any colour screwed for iron pipe and fixed 15mm bore (Prayag or equivalent ) all as specified.

S&F in repair gun metal globe gate valve 20 mm bore.

S&F in repair Towel Rack with lower hanger (stainless steel), fixed in repairs, complete all as specified and directed. Make : Jaguar ( Code No AHS-1581H) or its techno commercial equivalent.

S & F Wall mixer non telephonic Shower arrangement with connecting legs & Wall flanges, fixed in repairs. Make - Jaguar, Cat Part No - CON-219KN or its techno commercial equivalent.

S&F in repair 15 mm dia CP Pillar taps (fancy type), cast copper alloy with capstan heads, chromium plated,handle screwed down high pressure, with or without lettered HOt or cold with long screwed shanks and fly nuts ,screwewd for crewed for iron pipe and fixed complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make:Cera Model 3002101 or its techno commercial equivalent.

S&F in repairs Angle cock with wall flange 15 mm dia Fancy type. Make: Cera Model No QTF 2006201 or its techno commercial equivalent.

S&F in repairs stop valves, chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15mm bore dia.

S&F in repairs stop valve fancy type chromium plated long shank and cup (concealed type)

S&F in repairs Soap Dish holder all as specied and directed by Engr-in-Charge. Make : Jaguar (Code No ACN-1131N) or its techno commercial equivalent.

S&F Paper holder with Flap Recessed Type (Stainless steel), in repairs, all as spd and directed by Engr-in-Charge. Make : Jaguar (Code No AQN-7753) or its techno commercial equivalent.

S&F Corner Glass shelf with bracket, in repairs, all as spd and directed by Engr-in-Charge. Make : Jaguar (Code No CAN-1173) or its techno commercial equivalent.

Taking down & Refixing of CP Fittings such as 15 mm dia Angle valve, Bib cock, stop cock complete all as specified and directed by Engr- in - charge.

S&F in repair Sink with drainage board made of stain less steel 1mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm complete all as approved by Engr-in-Charge.

S&F in repair Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr .

S&F in repairs Decorative wooden finished curtain rod mild steel chromium plated of 20 mm dia all as directed and specified by Engr in charge.

S&F decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete.

S&F in repair Corner bracket golden colour suitable for drapery rod As per sample complete all as specified and directed by Engr-in-Charge.

S&F in repair knobs golden colour suitable ISI marked as per sample complete all as specified and directed by Engr-in-Charge.

S&F Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe fixed in repair, complete all as specified.

S&F as in repair 15mm dia Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed

M&L for 12mm thick block boards grade 2 quality, interior grade decorative type with decovative face veneer on one face, fixed with screws to timber frame work all as specified and as directed fixed in repairs

M&L for 19/20mm thick block boards grade 2 quality, interior grade decorative type with decovative face veneer on one face, fixed with screws to timber frame work all as specified and as directed fixed in repairs

S&F continuous (Piano) hinges mild steel, powder coated, width of flaps 30mm

M&L for newly plasterer surfaces of wall and applying two coat of oil bound distempering on walls with 1mm thick wall care putty incl preparation of surfaces.

Writing letters or figures (Block, Roman, italic or Indian) n exc 30 cms height.

Writing stops, commas, short lines dashes, hyphens, brackets, etc.

Removal and cleaning of vegetation, fungus, moss small trees etc from the roof top, chajja and removing spoils to a distance n.exc 100 m from the periphery of the single/Double story building.

M&L for Preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and directed.

M&L for prepration of new steel surfaces of any description not otherwise described over 10cm width or girth applying two coats of sy enamel paint over a coat of red oxide zinc chrome primer all as directed by Engr-in-charge.

M&L for preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for one coat of synthetic enamel paint (1st grade quality) to old decorated wooden surfaces of any description ,not otherwise described over 10 cm width or girth incl preparation of surface complete.

M&L for one coat of synthetic enamel paint (1st grade quality) to old decorated steel surfaces of any description ,not otherwise described over 10 cm width or girth incl preparation of surface complete.

M&L for one coat of synthetic enamel paint (1st grade quality) to old decorated plastered surfaces of wall of any description ,not otherwise described over 10 cm width or girth incl preparation of surface complete.

M&L for one coat of white wash on old decorated surface of internal /External walls incl preparation of surface by scrubbing down on steel wire brushing scrubbing down smokes spots moulds, moss and efflorescent salts and treating oil and greasy spots all as specified and directed.

M&L for one coat of white washing on old decorated ceiling surfaces incl preparation of surfaces.

M&L for two coat of white wash on old decorated surface of internal /External walls incl preparation of surface by scrubbing down on steel wire brushing scrubbing down smokes spots moulds, moss and efflorescent salts and treating oil and greasy spots all as specified and directed.

M&L for one coat of cement base paint to old decorated surfaces of wall incl preparation of surfaces complete all as specified and directed.

M&L for two coat of cement base paint to old decorated surfaces of wall incl preparation of surface & curing complete after complete removal/scarpping of existing treatment.

M&L for old painted surfaces of wall washing rubbing down and stopping of distembered surfaces on walls,removing nails making good holes cracks etc and applying one coat of oil bound distempering on walls with 1mm thick wall care putty incl preparation of surfaces.

M&L for old plastered surfaces of wall washing rubbing down and stopping of distembered surfaces on walls,removing nails making good holes cracks etc and applying two coat of oil bound distempering on walls with 1mm thick wall care putty incl preparation of surfaces.

M&L for old painted surfaces of wall at one coat of oil bound distempering incl preparation of surfaces as in ceiling .

M&L for one coat of exterior paint to old decorated surfaces of wall ,floor, interloking & chequred tile or incl preparation of surfaces complete all as specified and directed.

M&L for French polishing on surfaces of any description width or girth incl cleaning and preparation and polishing surface with one or more coat on old work, complete all as specified and directed.

M&L for Preparation of old painted concrete/plastered surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L for Water based Road marking paint Viz., lines, Dashes etc on bituminous/ concrete surfaces not exceeding 15cm width or girth .

S&F steel rolling shutters 1.25 mm thick, with out ball bearing, as specified including top cover, an-choring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete: push pull or manual type.

S&F Safety lever locks mild steel with 4 levers for rolling shutters.

S&F Ball bearing for rolling shutters.

Taking down steel rolling shutters push & pull type not exc 14 Sqm area of clear opening each including cover & cleaning the sides of shutter, suspension shaft and guide channel and greasing of the moving parts of rolling shutter and strainghtening of rolling shaft and tightening/replacement of ball bearing,bolts, nuts and any other defective parts as required for smooth functioning of shutter & refixing in same opening complete all as directed.

Note : FOR SL ITEM NO 1 TO 147 : ( a) The bidder shall note that one plumber and one helpers and one Mason and one helper and one Carpenter and one helper including T&P shall be made available at the Det office of the AGE B/R-II, CQAE(WE) Bangalore throughout the contract period against the fixing of elements covered under BOQ. The rate shall be deemed to be included in this provision in the quoted rate and nothing extra shall be entertained by the Govt on this account.

Schdele A Part II-E/M works

Disconnecting and taking down the ceiling fan carefully dismantling complete, servicing by cleaning and greasing the bearing/bush and replacement of split pin, replacing unserviceable items like bearing, bushes, rubber real, condenser, flexible cable, canopy, etc., assembling e fan refixing in the original place connection and testing complete all as specified and as directed Note;- Replacement of unserviceable items will be measured and paid under relevant items :- (a) Ceiling Fan 1200/1400 mm sweep

Supply only ball bearing for 1200/1400mm sweep Make;- TATA / SKF/NBC

Supply only gun metal bushes for 1200/1400mm sweep ceiling fan

Supply only condenser 2.5/3.5Mfd for ceiling fan

Supply only of canopy for 1200/1400 mm Sweep ceiling fan

Supply only rubber reel suitable for 1200/1400/1500mmsweep ceiling fan

Supply only blades suitable for 1200/1400/1500mm sweep ceiling fan set of 3 blades.

Supply only blades suitable for Exhaust Fan of size 280/300/450 mm sweep

Checking of ceiling fan for split pin, check nuts rubber reel, nut bolts, wiring etc & getting the signature of the occupants complete all as directed. NOTE :- Replacement of rubber reel, nuts bolts, wiring etc will be measured and paid under relevant items of the schedule separately. Replacement of split pin, check nuts are within the scope of work.

Supply and Fixing of PVC single core core flexible copper insulated cable 1.5 sqmm

Supply and Fixing of PVC single core core flexible copper insulated cable 2.5 sqmm

Supply and Fixing of PVC single core core flexible copper insulated cable 4.0 sqmm

Supply and Fixing of PVC single core core flexible copper insulated cable 6.0 sqmm

Collecting the burnt ceiling fans including blades of any make from AGE E/M store yard/ site taking out to reputed work shop dismantling removing the burnt winding, rewinding of ceiling fan with super enameled copper conduct winding wire of same gauge, insulating, varnishing, baking, including replacing of wornout bearing/bush greasing assembling and transporting the same and fixing and testing at site all as specified and as directed by Engr-in-charge,

1200 mm Sweep

1400 mm Sweep

All as per item No 161 but for Exhaust Fan of size 280/300 mm sweep

Disconnecting and taking down the Exhaust fan carefully dismantling complete, servicing and greasing by the bearing/bush replacing unserviceable items like bearing, bushes,Condesor, flexible cable ., assembling the Exhaust fan and refixing in original place including connection and testing complete all well as specified and as directed Note : Replacement of unserviceable items will be measured and paid under relevant items.

Supply only ball bearing and Bush for Exhaust fan 280/300 /450 mm sweep Make;- TATA / SKF/NBC

Taking down opening and inspection of storage type water heater of size 25/50ltrs capacity and discaling with dilute hydrochloric acid, checking for water tightness of the inner tank, cable continuity, thermostat most of setting at 70 degree C checking fusible plug, stop cock including replacement of indicator lamp, rubber PVC gasket washers reassembling and refixing at old place and replacing unserviceable bolts and nuts, cementing work including hydraulic pressure testing with hard operated hydraulic pump complete after repair including spray painting of one coat with DUCO paint of approved in after preparation of surface Note : (a) Replacement of unserviceable items like heating element,Indicator lamps, thermostat, stop cock, 3 core copper cable will be measured & paid separately. (b) Repalcement of Glass wool is included in unit rate. (c) Replacement of Hot cold pipe is included in unit rate

Supply only heating element including rubber/PVC gasket of the following all as directed including rubber washer 1.5KW / 2 KW any type

Opening , removal, testing and repalcement and calibration of thermostat of the geyser including rubber gasket and setting temperature between 70 degree C to 80 degree C for capacity of 25/50 Ltrs

Checking thermostat calibration only of the geyser and setting temperature between 60 degree to 70 degree & getting the signature of the occupants complete all as directed.

Material and Labour for Disconnecting from Electric and water mains and Dismantling the unserviceable gyeser base assembly and replacing the new base assembly with rubber gasket for 25 Ltrs capacity of any make and refixing in original place including recoonecting of electric and water supply mains including testing complete all as speicifed and directed by Engr-in-charge.

Supply and Fixing Stop Valve 15mm dia and connecting to the existing water outles complete all as speicified and directed by Engr-in-Charge.

Material and Labour for Brazing of Storage Type water heater (Geyser) to stop leakage and testing of any capacity and make after completion upto the satisfaction of AGE E/M. Note :- Disconnecting and reconnecting of geyser (water and elctric ) is included in unit rate.

Supply and Fixing of copper conductor cable PVC insulated 3 core 4 sqmm size 1100 volts grade all as specified and as directed.

M & L for replacing of unserviceable of Geyser Indicator lamps set of 2 (one no Red, one no green) of any type complete all as specified and directed by Engr-in-Charge.

Supply only Rubber Gasket for inner Tank 25/50 Ltrs capacity of existing type and make complete all as specified and directed by Engr-in-charge.

Supply only Air release valve for 25/50 Ltrs capacity of existing type and make complete all as specified and directed by Engr-In-charge.

Supply only Non Return Valve for 25/50 Ltrs capacity of existing type and make complete all as specified and directed by Engr-in-charge.

Supply only copper tank for 25 Ltrs capacity of existing type complete all as specified and directed by Engr-in-charge.

Supply only PVC connections 15 mm size with PTMT nuts of length 450 mm length (for hot and cold water inlet and outlet)as per sample.

M & L for dismanting the wall mounted fan any sweep and taking out the following old /unserviceable items.

(a)burned out fan winding

(b)unserviceable fan bearing

(c)unserviceable bush

M & L for cleaning the slots and rewinding the wall mounted fan 400 mm sweep with suitable guage super enameled copper winding wire,insulating and heating properly

Supply and fix fan bearing of suitable size for wall mounted fan 400 mm sweep o

Supply and fix fan bush of suitable size wall mounted fan of the any sweep

Supply and replacement down rod for ceiling fan with 15mm dia GI pipe medium grade ,screwed and drilled with clamps rubber real ,nuts,bolts, and safety pin,etc including painting ,up to 3 mtrs height.

M&L for glass wool packing required quantity for covering the 25 ltrs copper shell to avoid the heat conduction .

Taking down unserviceable /rusted GI tubing of 15mm bore

Supply and fix GI tubing of 15 mm bore medium grade including fittings fixed on walls with proper clamps .

Supply and fix metal louvers of suitable size for exhaust fan of the following sweep

(a)300 mm sweep

(b )230 mm sweep

Disconnecting, taking down old/unserviceable switchs. Supply and fix switch flush type 5 Amps single pole One way.

Disconnecting, taking down old/unserviceable switchs. Supply and fixing of switch flush type 5 Amps single pole two way.

Disconnecting, taking down old/unserviceable Bell Push switchs. Supply and fixing of Bell Push switch flush type 5 Amps.

Disconnecting, taking down old/unserviceable Lamp holders . Supply and fixing of PVC Lamp holders Angle/Batten all as specified and directed by Engr-in-Charge.

Disconnecting, taking down old/unserviceable Ceiling rose . Supply and fixing of Ceiling rose 65 x 50 mm with 3 terminals all as specified and directed by Egnr-in-Charge.

Disconnecting, taking down old/unserviceable switch socket outlet 5 Amps . Supply and fixing of 5 Amps Switch socket combination 5 Pin.

Disconnecting, taking down old/unserviceable switch socket outlet 15 Amps Supply and fixing of 15 Amps Switch socket combination 5 Pin.

Disconnecting, taking down old/unserviceable fan regulator . Supply and fix fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, 100 watts all as specified and as directed by Engr-in-Charge.

Supply and fix fan speed regulator, electronic step type regulator Switch/Socket type suitable for Single phase AC 240 volts, 50 hz, all as specified and as directed by Engr-in-Charge and including taking down old/unsv regulator of anysize/type.

Supply and fix Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete.

Supply and fix Modular switch 2 way 6A, 1 module type, 230 volts, ISI marked complete.

Supply and fix Modular Bell push 6A 1 module type, 230 volts, ISI marked complete.

S & F Modular stepped type electronic fan regulator 2 Module, on the existing phenolic laminated sheet etc. as reqd

Supply and fix Socket, 6A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Disconnecting, taking down old/unserviceable Call Bell . Supply and fixing of Call Bell 230 Volts 50HZ .

Disconnecting, taking down old/unserviceable, Supply and fix MCB Triple pole and Neutral , 415 volts, 63 Amps 10 KA, 'C' Curve all as specified and as directed.

Disconnecting, taking down old/unserviceable, Supply and fix MCB Single pole & neutral 240 volts, 5 to 30 Amps 10 KA, 'C' Curve all as specified and as directed.

Disconnecting, taking down old/unserviceable, Supply and fix MCB single pole, 240 volts, 5 to 30 Amps 10 KA , 'C' Curve all as specified and as directed by Engr-in-Charge.

Taking down unsv Distribution board of any size/capacity/make

Supply and fix sheet metal enclosures for MCB distribution board 415 Volts Triple pole and neutral 4 way Double door with 200 Amps rated busbar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Supply and fix sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 8 way Double door with 200 Amps rated busbar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Supply and fix sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 4 way Double door complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Supply and fix of metal clad socket outlet with single pole and neutral enclosure with two pin and earth plug socket complete with one single pole MCB 20 Amps

Supply and fix of metal clad socket outlet with Triple pole and neutral enclosure with two pin and earth plug socket complete with one triple pole MCB 20 Amps

Taking down sub main wiring

Sub main wiring complete with two runs of 1.5 sqmm single core PVC insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade, multistranded with copper conductor drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories Concealed /fixed to walls / roofs / floors etc., and including provision of PVC insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade 1.5 sqmm for earth continuity conductor and making good the disturbed surfaces also matching the exisiting surfaces all as specified and as directed by Engr-in-Charge. Note: Two runs of 1.50 sqmm single core PVC cable and one run of 1.5sqmm PVC cable for earth continuity conductor shall be measured and paid as one RM .

Sub main wiring complete with two runs of 2.5 sqmm single core PVC insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade, multistranded with copper conductor drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories Concealed /fixed to walls / roofs / floors etc., and including provision of PVC insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade 2.5 sqmm for earth continuity conductor and making good the disturbed surfaces also matching the exisiting surfaces all as specified and as directed by Engr-in-Charge.Note: Two runs of 2.50 sqmm single core PVC cable and one run of 2.5sqmm PVC cable for earth continuity conductor shall be measured and paid as one RM .

Sub main wiring complete with two runs of 4 sqmm single core PVC insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade, multistranded with copper conductor drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories Concealed /fixed to walls / roofs / floors etc., and including provision of PVC insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade 2.5 sqmm for earth continuity conductor and making good the disturbed surfaces also matching the exisiting surfaces all as specified and as directed by Engr-in-Charge.

Taking down carefully aluminium point wiring (light, fan, socket or power ) complete, including fittings and fixtures such as switches, ceiling roses, light fittings, regulators, sockets etc, removing materials to store, or keeping in safe custody for re-use at site or offering credit,& making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Point wiring complete with1.5 sqmm single core PVC insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including non metallic rigid PVC Casing n Capping or conduit not less than 20mm dia and conduit accessories fixed to walls / floors / ceiling etc., and including provision of PVC Insualted heavy duty ISI Marked unsheathed copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of sheet metal box 1.6mm thick fixed and flushed in side the walls and making good the disturbed surface with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc., for the following:-

One light / Exhaust Fan point controlled by one switch.

One fan point controlled by one switch and one regulator.

One Bell Point controlled by one Bell Push

One switch socket outlet point 3 pin 5 Amps on Independent board.

One switch socket outlet point 3 pin 5 Amps on same board.

Point wiring complete with 2 run of 2.5 sqmm single core PVC insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including rigid PVC conduit not less than 20mm dia and conduit accessories fixed to walls / roofs / floors / ceiling etc., and including provision of PVC insulated heavy duty ISI Marked unsheathed copper conductor 1.5 sqmm forearth continuity conductor and connected to common earth dolly, including suitable size of sheet metal box 1.6mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches/socket outlets, 15 Amps S/S outlet.

Supply and fixing LED , Tube light fitting 20 W, 6500K trim LED aluminium linear batten lamp with Decorative ultra slim linear LED lighting fixture with extruded polycarbonate surface mounted high Efficiency PMMA diffuser soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting all as specified and directed. Make: Wipro model : LL20-281-XXX-65AL1 or Equivalent in Philips/Ledvance/ Havells

Supply and fixing LED , Tube light fitting 10 W 6500K with Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body surface mounted high Efficiency PMMA diffuser soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting,including dismantling old unsv fittings all as specified and directed. Make Wipro Cat No: LL20-111-XXX-65-NE or its techno commercial equivalent.

Supply and fix driver suitable for 20/40 Watt LED post top lantern light fittings and testing complete including taking down the Same all as specified and directed.

Supply and fix 25 watts, 230 V LED fitting for Building security with pressure die cast aluminum housing, with Control driver with efficiency 90 %,with heat resistant glass and IP 65 protection withSleek pressure die cast aluminum housing,Heat resistant glass with better optics for uniform distribution,including necessary fixing arrengment of clamps,nut,bolts, etc..including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make : CG Cat Part No. LSTS-25-CDL or its techno commercial equivalent.

Supply and fix 45 watts, 230 V LED fitting for Building security with pressure die cast aluminum housing, with Control driver with efficiency 90 %,with heat resistant glass and IP 65 protection with better optics for uniform distribution,including necessary fixing arrengment of clamps,nut,bolts, etc..including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make :CG Cat Part No. LSTP-45-CDL or its techno commercial equivalent.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to galvanised earth lead wire 4.00mm GI earth continuity conductor including 15 mm bore pipe Light grade for protection of lead by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel connected to maint switch control board upto 7.5 mt away from earth electrode all as shown as per plate No 05 of SSR part - I including necessary earth work, PCC 1:3:6 type C1 chamber, RCC cover slab of 50 mm thick 1:2:4 with 8 mm CTD 140 mm C/C with suitable handle, watering pipe 20 mm dia light grade pipe with funnel, charcoal, salt and testing on completion and including taking old unserviceable earthing with connected items all as specified and directed by Engr-in-Charge.

Note : FOR SL ITEM NO 148 TO 224 : (a) The bidder shall note that one electrician and one helper shall be made available including T & P at the office of the AGE E/M, CQAE Bangalore throughout the contract period against the fixing of elements covered under BOQ.the rate shall be deemed to be included in this provision in the quoted rate and nothing extra shall be entertained by Govt on this account. (b) Please note that the contract shall run for the period of 09(Nine) months irrespective of quantities provided in BOQ. (c) The bidder shall note that electricians employed should have mobile with them for the easy communications with USER & JE EM through ONLINE COMPLAINT SYSTEM. (d) The bidder shall note that each Electricians employed should have there individual bicycle to attend the complaints. (e) Attendance register will be provided by the contractor for daily attendance of electrician and helper.The same shall be put up to JE(E/M)/Engineer in Charge on daily basis.

SRUSHTI CONSTRUCTIONS