Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹88.5 LAdmitted-Finance 101 103 RAJKUMAR GANDHI BOTHRA COMPLEX MODEL MILL SQUARE GANESHPETH NAGPUR 18 94221 NAGPUR MAHARASHTRA 440018 | NAGPUR | MAHARASHTRA | 440018 | ₹88.5 L | L1 | Admitted-Finance |
| 2 | L2₹95.0 LAdmitted-Finance | ₹95.0 L | L2 | Admitted-Finance |
| 3 | L3₹95.6 LAdmitted-Finance | ₹95.6 L | L3 | Admitted-Finance |
| 4 | L4₹1.4 CrAdmitted-Finance | ₹1.4 Cr | L4 | Admitted-Finance |
| 5 | L5₹4.4 CrAdmitted-Finance | ₹4.4 Cr | L5 | Admitted-Finance |
Tender Value
Refer Docs
Closing Date
16 Jan 2026, 3:00 pmClosed
EXECUTIVE ENGINEER
Executive Engineer Gosikhurd Right Bank Canal Division Bramhapuri
Quotation for estimation of Canal Automation work and Lift Irrigation Scheme Tah. Bramhapuri Dist. Chandrapur. Proposed Item of Work to call Budgetary offer being Non CSR Rates
2026_CEWRD_1266214_1
Quotation Notice No. 03/2025-26
Open Tender
Civil Works - Others
90 days
Bramhapuri
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
17 Jan 2026
5 Jan 2026
16 Jan 2026
5 Jan 2026
16 Jan 2026
5 Jan 2026
Amount
Supply, Installation, Testing and Commissioning (SITC) of Automated Water Level Recorder (AWLR) based on non-contact radar technology, suitable for open canal applications under standard atmospheric pressure, having measurement range suitable for canal water levels up to at least 6.0 m with measurement accuracy better than ±2 mm, providing standard analog output (4–20 mA) with digital communication facility for configuration, calibration and diagnostics, having ingress protection class minimum IP66 (preferably IP67) suitable for outdoor installation, CE or equivalent certified, and constructed from corrosion- and chemically-resistant materials suitable for canal environment, suitable for installation at varying mounting heights up to 12 m above canal bed or maximum water level, supplied complete with sufficient cable length as required at site, mounting brackets, supports, standard fittings and all accessories necessary for proper installation, alignment and integration with SCADA / data logging system. The device shall carry a minimum 2-year warranty from the date of commissioning along with comprehensive maintenance support up to 5 years including calibration, spares and servicing. The item rate shall include all ancillary works, QA/QC requirements, laboratory and third-party inspection/testing charges and all incidental costs, complete, as directed by the Engineer-in-Charge. Note: Rates are exclusive of GST but inclusive of all other taxes, levies, duties, royalties and local taxes.
Supply, Installation, Testing and Commissioning (SITC) of Acoustic Doppler Flow Meter (ADFM), suitable for open canal applications under standard atmospheric pressure, with measurement of flow velocity using Doppler principle and water level using piezo-resistive or vented pressure sensor, or equivalent suitable non-contact level sensor appropriate for open canal conditions, subject to approval of the Engineer-in-Charge, having flow velocity measurement range up to +6 m/s with flow measurement accuracy ±1% of final value, water level measurement range from 0.005 m to 6.0 m with level measurement accuracy less than 0.5% of final value, long-term level measurement stability better than ±1% of full scale per year with provision for field calibration, operating ambient temperature range from 0°C to +60°C, and protection class IP68, suitable for operation in silt-laden canal water and fluctuating flow conditions, supplied complete with necessary cable length (minimum 30 m or as required at site), mounting accessories, standard fittings, provision for SCADA integration with standard communication protocols, complete calibration and testing, and carrying a minimum 2-year warranty from the date of commissioning along with comprehensive maintenance support up to 5 years including calibration, spares and servicing, the item rate being inclusive of all ancillary works, QA/QC requirements, third-party testing charges and all incidental costs, complete as directed by the Engineer-in-Charge; the rates shall be exclusive of GST but inclusive of all other taxes, levies, duties, royalties and local taxes.
Part 2-Electrification And Controlling Device
Supply, Installation, Testing and Commissioning (SITC) of fully automatic Variable Frequency Drive (VFD) starter suitable for operation of canal gate motors, compatible with 380–440 V, 3-phase, 50 Hz power supply and rated as per the connected squirrel cage induction motor capacity. The VFD starter shall provide controlled starting, stopping and speed regulation of the motor and shall incorporate standard electrical and motor protection functions in accordance with applicable IEC / IS standards. The starter shall be housed in a powder-coated sheet steel enclosure suitable for outdoor installation with minimum ingress protection class IP66 (preferably IP67). Each gate shall be provided with an independent VFD starter; however, where multiple gates are operated through a common shaft or drive mechanism, a single appropriately rated VFD starter shall be provided for such arrangement. The unit shall be supplied complete with all accessories necessary for proper installation, testing and commissioning. The device shall carry a minimum 2-year warranty from the date of commissioning with provision for comprehensive maintenance support up to 5 years including spares and servicing. The item rate shall include all ancillary works, QA/QC requirements, laboratory testing charges, third-party inspection and testing charges, and all incidental costs, complete, as directed by the Engineer-in-Charge. Note: Rates are exclusive of GST but inclusive of all other taxes, levies, duties, royalties and local taxes.
For 10 HP Motor
For 15 HP Motor
Supply, laying, testing and commissioning of control and signal cable of size 12 core × 2.5 sq.mm, stranded copper conductor, PVC insulated, overall shielded with aluminium-mylar tape and tinned copper drain wire, PVC / FRLS outer sheathed, suitable for 1100 V grade, conforming to IS:1554 (Part-1) / IS:7098 and relevant IEC standards, complete with cable accessories including glands, lugs, ferruling and termination, laid in trench / conduit / tray as required, complete as directed by the Engineer-in-Charge. The cable shall carry a minimum 2-year warranty and shall be covered under the comprehensive system maintenance contract up to 5 years.
Supply, laying, testing and commissioning of power cable of size 3 core × 2.5 sq.mm, stranded copper conductor, PVC insulated, PVC / FRLS outer sheathed, suitable for 1100 V grade, conforming to IS:1554 (Part-1) / IS:7098 and relevant IEC standards, suitable for outdoor / underground installation, complete with cable accessories including glands, lugs, ferruling and termination, laid in trench / conduit as required, complete as directed by the Engineer-in-Charge. The cable shall carry a minimum 2-year warranty and shall be covered under the comprehensive system maintenance contract up to 5 years
Supply, laying, testing and commissioning of signal / low-power cable of size 2 core × 1.5 sq.mm, stranded copper conductor, PVC insulated twisted pair, overall shielded with aluminium-mylar tape and tinned copper drain wire, PVC / FRLS outer sheathed, suitable for 1100 V grade, conforming to IS:1554 (Part-1) / IS:7098 and relevant IEC standards, complete with cable accessories including glands, lugs, ferruling and termination, laid in trench / conduit / tray as required, complete as directed by the Engineer-in-Charge. The cable shall carry a minimum 2-year warranty and shall be covered under the comprehensive system maintenance contract up to 5 years
Supply, Installation, Testing and Commissioning (SITC) of indoor-type LT Power Distribution Panel suitable for canal gate automation system, fabricated from CRCA sheet steel, floor-mounted, dust- and vermin-proof, suitable for 415 V, 3-phase, 4-wire, 50 Hz supply, complete with main incomer MCCB, outgoing MCCBs/MCBs for VFD starters, PLC/RTU panels, UPS and auxiliary loads, internal busbar arrangement of adequate rating, digital multifunction meter, earthling busbar, surge protection device, lightning protection and earthling provisions, including all internal wiring, terminations, testing and commissioning. The panel shall carry a minimum 2-year warranty from the date of commissioning with provision for comprehensive maintenance support up to 5 years including spares and servicing. The item rate shall include all ancillary works, QA/QC requirements, laboratory and third-party inspection/testing charges, complete as directed by the Engineer-in-Charge. Rates are exclusive of GST but inclusive of all other taxes, duties, levies and local taxes.
Supply, Installation, Testing and Commissioning (SITC) of Programmable Logic Controller (PLC) with integrated Human Machine Interface (HMI), suitable for automation and control of canal gates (maximum up to five gates per PLC), complete with required analog and digital I/O modules with minimum 25% spare capacity, panel mounting, and licensed application software. The PLC system shall provide automatic control and interlocking of gate actuators/motors and associated field sensors, enable local monitoring through HMI and integration with SCADA for central monitoring, and include audible and visual alarm provisions. The PLC shall support open communication protocols such as Modbus RTU (RS-485) and/or Modbus TCP/IP (Ethernet) for integration with SCADA systems and shall support transmission of alarms and events to SCADA for further notification to designated users. The system shall be capable of coordination and interlocking with other PLCs where required. The item shall be supplied complete with all accessories, wiring, terminations, configuration, testing and commissioning. The system shall carry a minimum 2-year warranty from the date of commissioning with provision for comprehensive maintenance support up to 5 years, including software support, spares and servicing. The item rate shall include all ancillary works, QA/QC requirements, laboratory and third-party inspection/testing charges, complete as directed by the Engineer-in-Charge. Rates are exclusive of GST but inclusive of all other taxes, duties, levies and local taxes
Supply, Installation, Testing and Commissioning (SITC) of Solar Power Backup System for field installations, comprising photovoltaic solar panels, MPPT charge controller, battery bank sized to provide minimum 8 hours backup for PLC, instrumentation, alarms and communication equipment, DC/AC inverter, mounting structure, weatherproof enclosure and all necessary power and control cabling. The system shall provide uninterrupted power supply to PLC, alarms and communication devices at gate locations, with automatic changeover to solar/battery power during mains power failure. The solar power backup system shall be intended for control and communication loads only and shall not be used for operation of motors or actuators. Complete with installation, testing and commissioning, with minimum 2-year warranty and provision for comprehensive maintenance support up to 5 years, including routine inspection, testing and calibration of system components, complete as directed by the Engineer-in-Charge. The item rate shall include all ancillary works, QA/QC requirements, laboratory and third-party inspection/testing charges. Rates are exclusive of GST but inclusive of all other taxes, duties, levies and royalties.
Supply, Installation, Testing and Commissioning (SITC) of three-phase squirrel cage induction motor of 10 HP (7.5 kW) rating, suitable for canal gate actuator operation, compatible with 380–440 V, 50 Hz power supply, TEFC construction, minimum protection class IP55, Class F insulation, suitable for operation with VFD starter, and having efficiency not less than 89%. The motor shall be suitable for foot or flange mounting as required at site and shall be supplied complete with terminal box, foundation bolts and standard accessories required for installation, testing and commissioning. The motor shall conform to relevant IS / IEC standards (IS 325 / IS 1231 / IEC 60034). The motor shall carry a minimum 2-year warranty from the date of commissioning with provision for comprehensive maintenance support up to 5 years including spares, complete as directed by the Engineer-in-Charge. The item rate shall include all ancillary works, QA/QC requirements, laboratory and third-party inspection/testing charges. Rates are exclusive of GST but inclusive of all other taxes, duties, levies and local taxes
Supply, Installation, Testing and Commissioning (SITC) of three-phase squirrel cage induction motor of 15 HP (approximately 11 kW) rating, suitable for canal gate actuator operation, compatible with 380–440 V, 50 Hz power supply, TEFC construction, minimum protection class IP55, Class F insulation, suitable for operation with VFD starter, and having efficiency not less than that specified in applicable IS / IEC standards. The motor shall be suitable for foot or flange mounting as required at site and shall be supplied complete with terminal box, foundation bolts and standard accessories required for installation, testing and commissioning. The motor shall conform to relevant IS / IEC standards (IS 325 / IS 1231 / IEC 60034). The motor shall carry a minimum 2-year warranty from the date of commissioning with provision for comprehensive maintenance support up to 5 years including spares, complete as directed by the Engineer-in-Charge. The item rate shall include all ancillary works, QA/QC requirements, laboratory and third-party inspection/testing charges. Rates are exclusive of GST but inclusive of all other taxes, duties, levies and local taxes
Supply, Installation, Testing and Commissioning (SITC) of integrated electrical actuator suitable for operation of small vertical or lateral canal gates, comprising electric motor with integral gearbox, built-in starter/control unit, position feedback arrangement and limit switches for open and close positions, with provision for manual override/hand operation for emergency use. The actuator shall be of robust weatherproof construction with minimum ingress protection class IP67 and shall be suitable to provide adequate torque for gate operation under site conditions. The actuator shall be compatible for integration with PLC/SCADA-based control system for remote operation and monitoring. The unit shall be supplied complete with all mounting accessories, wiring, terminations, testing and commissioning. The actuator shall carry a minimum 2-year warranty from the date of commissioning with provision for comprehensive maintenance support up to 5 years including spares and servicing, complete as directed by the Engineer-in-Charge. The item rate shall include all ancillary works, QA/QC requirements, laboratory and third-party inspection/testing charges. Rates are exclusive of GST but inclusive of all other taxes, duties, levies and local taxes.
Centralised Server Room System
Supply, Installation, Testing and Commissioning (SITC) of broadband leased line connection with minimum 100 Mbps dedicated bandwidth and one static IP address at Central SCADA Control Room, including router, firewall configuration, cabling and all necessary accessories, complete for secure real-time data communication and remote monitoring of SCADA system, with subscription for a minimum period of two years and provision for renewal, complete as directed by the Engineer-in-Charge. Rates are exclusive of GST but inclusive of all other taxes, duties, levies and local taxes.
Design, Supply, Installation, Testing and Commissioning (SITC) of PLC based control system installed at Central Control Room, comprising Programmable Logic Controller (PLC) with required analog and digital I/O modules including minimum 25% spare capacity, open communication interfaces such as RS-485 and/or Ethernet, panel mounting and licensed application software, suitable for central coordination, monitoring and interfacing with field PLCs and SCADA system. The scope shall include panel wiring, configuration, testing and commissioning. The system shall carry a minimum 2-year warranty from the date of commissioning with provision for comprehensive maintenance support up to 5 years including software support and spares, complete as directed by the Engineer-in-Charge. Rates are exclusive of GST but inclusive of all other taxes, duties, levies and local taxes
Supply, Installation, Testing and Commissioning (SITC) of Central Control Room infrastructure comprising LED display panel of minimum 55-inch size, Full HD / 4K resolution, minimum brightness 500 nits, with wall mounting bracket; data server system comprising minimum one primary server and one standby server, each with minimum 12-core processor, 64 GB RAM, minimum 2 TB usable storage through SSD + HDD in RAID configuration, redundant power supply units and dual Ethernet ports; operator workstations comprising minimum two desktop computers, each with minimum 8-core processor, 16 GB RAM, minimum 1 TB SSD storage, licensed operating system, dual monitors of minimum 24-inch size each, keyboard and mouse; networking system comprising managed Gigabit Ethernet switches, industrial-grade router with firewall, Cat-6 structured cabling, patch panels and 19-inch network rack. Online UPS system of minimum 10 kVA capacity with external battery bank providing minimum 4 hours backup at full IT load, including static bypass switch, maintenance bypass, surge protection device and battery racks; HVAC system comprising precision or split air-conditioning units of minimum total cooling capacity 2 TR, capable of maintaining room temperature at 22 ± 2 °C under continuous operation; control room fixtures comprising operator console tables, server racks (minimum 42U), equipment racks, cable management trays, electrical distribution boards, power sockets and earthing arrangement, include electrical power connection from incoming supply point, internal power wiring, control wiring, data cabling, earthing and lighting arrangements comprising LED light fittings with switches, conduits and accessories. Complete with all accessories, installation, testing and commissioning, minimum 2-year warranty and provision for comprehensive maintenance support up to 5 years, supporting operation and visualization of SCADA software and PLC systems for real-time monitoring and alarms, complete as directed by the Engineer-in-Charge; the item rate shall include all ancillary works, QA/QC requirements, laboratory and third-party inspection/testing charges. Rates are exclusive of GST but inclusive of all other taxes, duties, levies and royalties
Design, development, supply, installation, testing and commissioning of Web-Based SCADA system for canal automation, integrating central and field PLCs, gate actuators, VFDs, flow meters, Automated Water Level Recorders (AWLRs) and associated sensors, providing real-time monitoring of gate positions, motor/actuator status, flow and water levels, along with alarm and event management, historical data logging, trend analysis and reporting. The system shall support configurable control based on feedback from field instruments and facilities for trend-based assessment and forecasting using historical data, wherever applicable as per system design. The SCADA shall support multi-user access with role-based permissions and provision for remote monitoring through secure web-based and/or mobile application interface. The scope shall include supply of SCADA software licences without limitation on data tags, system configuration, installation, testing, commissioning, operator training and documentation. The system shall carry a minimum 2-year Defect Liability Period with provision for comprehensive maintenance support up to 5 years, including software updates and technical support, complete as directed by the Engineer-in-Charge. Rates are exclusive of GST but inclusive of all other taxes, duties, levies and royalties.
Surveillance System
Supply, Installation, Testing and Commissioning (SITC) of CCTV surveillance and security system comprising minimum four IP-based cameras with infrared night vision of minimum 30 m range, outdoor weatherproof housing of minimum IP66 protection, network video recorder (NVR/DVR) of minimum 8-channel capacity with metal enclosure and motion-based recording facility, minimum 2 TB hard disk storage, control keyboard/controller, anti-theft alarm system, power supplies, UTP cabling with necessary connectors, conduits and accessories. The system shall be suitable for continuous surveillance of control room and associated facilities and shall be supplied complete with configuration, installation, testing and commissioning. The system shall carry a minimum 2-year warranty from the date of commissioning with provision for comprehensive maintenance support up to 5 years, including software support and spares. The item rate shall include all ancillary works, QA/QC requirements, laboratory and third-party inspection/testing charges, complete as directed by the Engineer-in-Charge. Rates are exclusive of GST but inclusive of all other taxes, duties, levies and royalties.
Additional Mechanism Item
Supply, Installation, Testing and Commissioning (SITC) of gearbox unit suitable for existing canal gate assembly, of helical / worm / bevel type as required, with rated gear ratio and torque capacity compatible with the gate design and operating conditions, corrosion-resistant housing with suitable protective coating, sealed and lubricated gearing, provision for manual override operation, and coupling arrangement suitable for connection to motor shaft. The scope shall include supply of gearbox, mounting accessories, alignment, installation, testing and commissioning, complete as directed by the Engineer-in-Charge. The gearbox shall carry a minimum 2-year warranty from the date of commissioning with provision for comprehensive maintenance support up to 5 years, including spares and servicing. The item rate shall include all ancillary works, QA/QC requirements, laboratory and third-party inspection/testing charges. Rates are exclusive of GST but inclusive of all other taxes, duties, levies and royalties
Item : VARIABLE FREQUENCY DRIVE PANELS FOR PUMPS Providing, supplying, designing & drawing, manufacturing, Installation, testing, and commissioning of a reputed make VARIABLE FREQUENCY DRIVE (VFD) panel, as per Indian/International standards, of the required size for the pump house of a Lift Irrigation Scheme. This includes VFD panels for 2 pumps of 125 HP (415V, 106 KW motors) and 3 pumps of 360 HP (3.3 KV, 305 KW motors), used to control and regulate the speed and performance of the electric motors driving the pumps. The VFD will adjust the frequency and voltage supplied to the motors, enabling precise control of pump operation, reducing energy consumption by controlling pump speed based on demand. It will provide a soft start/stop function by gradually accelerating and decelerating the pump motors, minimising mechanical stress, wear, tear, and water hammer in the piping system. The panel will also regulate flow to enhance system efficiency, maintain consistent pressure, and offer protection against overload, under-voltage, over-voltage, and phase failure. This leads to reduced maintenance, optimising water flow based on real-time field needs, resulting in significant water and energy conservation. The scope includes all materials, cabling, wiring, Instruments, electro-mechanical components, foundation, and an enclosed cabinet structure with IP66 protection, external controls, protection systems, displays, high-grade coating, and electric shock-proof arrangements. The work will also involve third-party inspections, factory testing, and adherence to QA & QC requirements. This shall be completed for the Lift Irrigation Scheme with centralised SCADA, as directed by the Engineer-in-Charge. Note. The rate shall exclude GST but include all other taxes, duties, levies, and royalties, if any.
VFD panels for pumps of 125 HP (415V, 106 KW motors)
VFD panels for pumps of 360 HP (3.3 KV, 305 KW motors)
Central India Engineering Pvt. Ltd. (BID ID -7164261)
Digisharp TechnoSoft LLP (BID ID -7163906)
LAXMI INFRA VISION PRIVATE LIMITED (BID ID -7159074)
CIMCON SOFTWARE (INDIA) PRIVATE LIMITED (BID ID -7159431)
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.94 MB
QuatationDocuments.pdf
Tender Documents • 1.24 MB
BOQ_2181404.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid