Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹8.1 Laccepted-aoc | ₹8.1 L | accepted-aoc |
Tender Value
₹11.0 L
EMD Value
₹16,600
Closing Date
21 Mar 2026, 9:30 pmClosed
Rural Development and Panchayat Raj Department
Shruthi.N.C
1Graveyard development work in survey no.75 of Kempashettidoddy village under Bairamangala village panchayat, Ramanagara taluk, Bidadi hobli. 2) Installation work of wooden table for Grama Panchayat Office, Bairamangala, Ramanagara Taluk, Bidadi Hobli. 3) Installation work of wooden shelves for Grama Panchayat Office, Bairamangala, Ramanagara Taluk, Bidadi Hobli
RDPR/2025-26/OW/WORK_INDENT25470
RDPR/2025-26/OW/WORK_INDENT25470
Reserved
Other Works
Electronic Documents, First(One Cover)
RDPR Division Office Ramanagaar
7 documents required · 7 mandatory
₹500
₹16,600
9 Mar 2026
9 Mar 2026
20 Mar 2026
1Graveyard development work in survey no.75 of Kempashettidoddy village under Bairamangala village panchayat, Ramanagara taluk, Bidadi hobli. 2) Installation work of wooden table for Grama Panchayat Office, Bairamangala, Ramanagara Taluk, Bidadi Hobli. 3) Installation work of wooden shelves for Grama Panchayat Office, Bairamangala, Ramanagara Taluk, Bidadi Hobli
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- with all lead and lift and loading and unloading charges cost and conveyance ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Formwork/Shuttering For Plinth Beam ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incident...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin ing, including cost of materials, labour,curing as per s...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of ...
Providing, fabricating and fixing of 6 mm thick High Pressure Laminate sheets in standard size of 1200 mm x 2400 mm (Sheets can be supplied in customized length depending on requirement). Sheets shall...
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Ty...
Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 kg/m3 ...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and ...
Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for F...
Providing and fixing bright finished brass handles with screws etc. complete: Brass handles 125 mm with plate 175x32 mm ---- with all lead and lift and loading and unloading charges cost and conveyanc...
Providing and fixing bright finished brass handles with screws etc. complete: Brass handles 100 mm with plate 150x32 mm ---- with all lead and lift and loading and unloading charges cost and conveyan...
Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge. 200mm length ---- with all lead and lift and loa...
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.75mm ---- with all lead and lift an...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-1-bYRAMANGALA-II-A.docx
Tender Document • 0.83 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .