Centre for Advanced Electronics Manufacturing and Skills Development

Civil Work

Removing Queen Post truss from roof and stacking the materials as directed with all leads and lifts complete. S.S.R.2020-21 Item No. 46.03

Dismantling flat wooden or Asbestos Cement sheet ceiling with frame work including stacking the materials as directed with all leads, lifts complete. S.S.R.2020-21 Item No. 46.06

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts, complete. S.S.R.2020-21 Item No. 46.09

Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts complete. S.S.R.2020-21 Item No. 46.11

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts complete. S.S.R.2020-21 Item No. 46.13

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts, complete. S.S.R.2020-21 Item No. 46.15

Removing wooden or Asbestos Cement partition including frame work and stacking the material as directed with all leads, lifts, complete. S.S.R.2020-21 Item No. 46.17

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts, complete. S.S.R.2020-21 Item No. 46.19

Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed. S.S.R.2020-21 Item No. 46.29

Removing G.I or A.C.sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. S.S.R.2020-21 Item No. 38.26

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) by Mechanical Means. S.S.R.2020-21 Item No. 21.02

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) by Mechanical Means. S.S.R.2020-21 Item No. 21.06

Excavation for foundation in Hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/ murum, watering, ramming, etc. complete. (Lift upto 1.5 m) by Mechanical Means. S.S.R.2020-21 Item No. 21.17

Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural sand/ Crushed sand V.S.I. Grade finely washed etc.) S.S.R.2020-21 Item No. 24.01

Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering & compaction complete. S.S.R.2020-21 Item No. 21.36

Providing uncoursed rubble masonary of trap stones in cement mortar 1:6 in foundations and plinth of inner walls/in plinth of external walls including bailing out water manually, striking joints on exposed faces and watering complete. S.S.R.2020-21 Item No. 28.01

Providing and laying Cast in situ/ Ready Mix cement concrete M-25 of trap/ granite/quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Natural Sand/ Crushed Sand V.S.I. Grade finely washed etc.) S.S.R.2020-21 Item No. 25.52

Providing and laying Cast in situ/ Ready Mix cement concrete M-25 of trap/ granite/quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Natural Sand/ Crushed Sand V.S.I. Grade finely washed etc.) S.S.R.2020-21 Item No. 25.52

Providing and laying Cast in situ/ Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand/ Crushed Sand V.S.I. Grade finely washed etc.) S.S.R.2020-21 Item No. 25.72

Providing and laying Cast in situ/ Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand/ Crushed Sand V.S.I. Grade finely washed etc.) S.S.R.2020-21 Item No. 25.72

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand/ Crushed Sand V.S.I. Grade finely washed etc.) S.S.R.2020-21 Item No. 26.07

Providing and laying Cast in situ/ Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand/ Crushed Sand V.S.I. Grade finely washed etc.) S.S.R.2020-21 Item No. 26.07

Providing and laying Cast in situ/ Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand/ Crushed Sand V.S.I. Grade finely washed etc.) S.S.R.2020-21 Item No. 26.19

Providing and fixing in position TMT FE -500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. S.S.R.2020-21 Item No. 26.33

Providing uncoursed rubble masonary of trap stones in cement mortar 1:6 in superstructure including raking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding complete. S.S.R.2020-21 Item No. 28.04

Providing uncoursed rubble masonary of trap stones in cement mortar 1:6 in superstructure including raking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding complete. S.S.R.2020-21 Item No. 28.04

Providing second class Burnt Brick masonry with conventional / I. S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. S.S.R.2020-21 Item No. 27.05

Providing second class Burnt Brick masonry with conventional / I. S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. S.S.R.2020-21 Item No. 27.05

Providing and laying jointless Polydee-LM jointless a highly flexible elastometric coating for RCC/ cementitious surface for terrace waterproofing on B.B.Coba/ R.C.C, after application of TP-42 Primer on perfectly clean substrate (free from loose dust and foreign matter), application of 1st coat of Polydee-LM at the rate 700 gms/sqm applying second coat of Polydee-LM at the rate 700 gm/sqm and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25 mm cement plaster for protection with fibrillated 6 mm Plyplast fibre at the rate 125 gms per sqm (to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs.100/- etc. complete. S.S.R.2020-21 Item No. 31.10

Providing internal cement plaster 12 mm. thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. S.S.R.2020-21 Item No. 32.04

Providing internal cement plaster 12 mm. thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. S.S.R.2020-21 Item No. 32.04

Providing and applying plaster with plaster of paris in 6mm. thickness to previously plastered surface in all position including preparing the surface scaffolding etc. complete. S.S.R.2020-21 Item No. 32.27

Providing and applying plaster with plaster of paris in 6mm. thickness to previously plastered surface in all position including preparing the surface scaffolding etc. complete. S.S.R.2020-21 Item No. 32.27

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/ B.B.masonry and or tying by binding wire etc. complete. S.S.R.2020-21 Item No. 32.26

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/ B.B.masonry and or tying by binding wire etc. complete. S.S.R.2020-21 Item No. 32.26

Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. S.S.R.2020-21 Item No. 32.17

Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. S.S.R.2020-21 Item No. 32.17

Providing and laying rough Shahabad Stone flooring 50mm to 60mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc.complete S.S.R.2020-21 Item No. 33.03

Providing and laying polished Tandur Stone flooring 25mm to 30mm thick and of required width in plain / diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. S.S.R.2020-21 Item No. 33.05

Providing and laying handcut polished Kotah Stone flooring 25 mm. to 30 mm. thick and 45 cm. to 55 cm. wide in plain/diamond pattern on a bed of 1:6 Cement Mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. S.S.R.2020-21 Item No. 33.08

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. S.S.R.2020-21 Item No. 33.81

Providing and laying handcut polished Kotah Stone flooring 25 mm. to 30 mm. thick and 45 cm. to 55 cm. wide in plain/diamond pattern on a bed of 1:6 Cement Mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. S.S.R.2020-21 Item No. 33.08

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. S.S.R.2020-21 Item No. 33.81

Providing and laying telephone black/ Amba White/ Cadburybrown/ Ruby red/ Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. S.S.R.2020-21 Item No. 33.68

Providing and laying telephone black/ Amba White/ Cadburybrown/ Ruby red/ Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. S.S.R.2020-21 Item No. 33.68

Polishing applying malamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying french polish, scaffolding if required etc. complete.Note: Prior Approval od S.E. will be necessary. S.S.R.2020-21 Item No. 34.09

Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, greese, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc. complete. S.S.R.2020-21 Item No. 35.20

Providing and applying two coats of synthetic enamel paint of approved colour to new/ old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. S.S.R.2020-21 Item No. 35.07

Providing and applying interior wall finish luster of Asian/ Berger/ Nerolac/ Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian/ Berger/ Nerolac/ Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian/ Berger/ Nerolac/ Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian/ Berger/ Nerolac/ Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian/ Berger/ Nerolac/ Dulux Paints or equivalent interior wall finish luster 1st coat with brush/ rubber/ spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity (With prior approval of S.E.). S.S.R.2020-21 Item No. 36.20

Providing and applying interior wall finish luster of Asian/ Berger/ Nerolac/ Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian/ Berger/ Nerolac/ Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian/ Berger/ Nerolac/ Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian/ Berger/ Nerolac/ Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian/ Berger/ Nerolac/ Dulux Paints or equivalent interior wall finish luster 1st coat with brush/ rubber/ spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity (With prior approval of S.E.). S.S.R.2020-21 Item No. 36.20

Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architercutral work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (excluding frame work,runners and mild steel suspenders) S.S.R.2020-21 Item No. 38.17

Providing and fixing false ceiling of 10 to 12 milimetre thick decorative boards of fibrous plaster of paris including scaffolding if necessary, all architercutral work like mouldings cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards complete. (excluding frame work,runners and mild steel suspenders) S.S.R.2020-21 Item No. 38.17

Providing and fixing false ceiling of 15 mm thick Accoustic tubular Armstrong/ Everest/ AMS (0.60x 0.60 m) boards of approved make, shape and sizes as per drawings including powder coated G.I. wall angle of 20 mm x 20 mm of 0.60 x 0.60 m size, G.I.grid runners of size 15 mm x 38 mm at 600 mm center to center both ways and suspended using G.I. 3 mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding, all necessary labour and machinery, finishing etc.complete. S.S.R.2020-21 Item No. 38.19

Providing and fixing false ceiling of 15 mm thick Accoustic tubular Armstrong/ Everest/ AMS (0.60x 0.60 m) boards of approved make, shape and sizes as per drawings including powder coated G.I. wall angle of 20 mm x 20 mm of 0.60 x 0.60 m size, G.I.grid runners of size 15 mm x 38 mm at 600 mm center to center both ways and suspended using G.I. 3 mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding, all necessary labour and machinery, finishing etc.complete. S.S.R.2020-21 Item No. 38.19

Providing and fixing country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete S.S.R.2020-21 Item No. 39.08

Providing and fixing solid core flush door commercial type on single leaf 16 mm thick Bison Panel cement bonded particle board including teak wood lipping beading on all four edges without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting three coats complete. S.S.R.2020-21 Item No. 39.11

Providing and fixing in position (as per 1868:1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm. at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm. at weight 1.070 kg/Rmt. Top and side track section 92 x 31.75 x 1.30 mm. at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm. at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm. at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm. thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc. complete with powder coating with box. S.S.R.2020-21 Item No. 39.43

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg./sq.m.as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. S.S.R.2020-21 Item No. 40.01

Providing and fixing on walls /ceiling /floor 25 milimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. S.S.R.2020-21 Item No. 42.57

Providing and fixing White glazed earthenware Wash Hand Basin of 63 x 45 cm size with bottle trap including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. S.S.R.2020-21 Item No. 41.70 .

Providing and fixing 10 cm C.I. Nahani Trap including C.I. grating ,bend and piece of C.I. pipe upto the outside face of the wall complete. S.S.R.2020-21 Item No. 41.80

Providing and constructing Brick Masonry inspection trap Chamber 90 centimetre x 45 centimetre including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels/ half round glazed stoneware pipe channel, salt glazed stoneware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and outside, fixed in cement concrete with Reinforced cement concrete cover medium duty 140 kilogram etc. complete. S.S.R.2020-21 Item No. 42.15

Providing and laying concrete pipe of I.S. N.P. class of 150 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. S.S.R.2020-21 Item No. 42.07

Providing and fixing P.V.C. Rain Water pipes of 110 mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. S.S.R.2020-21 Item No. 42.87

Fixing of name plate on 2nd gate opposite to the Bank of Maharashtra (Near H-Block) at hostel campus in 3D type Specs same as above only change is this board is hanging type of size Size : 16.5 x 3.75 ft (Letter Ht Of C in College of Engineering : 7.7, Letter Ht Of C in COEP : 7.8 inch and Letter Ht Of H : 9.5 inch) Gate No 2 Board : Non LIT board in ACP with cut acrylic letters Size 12x26 inch, Cable 1.5 sq mm 3 core for 230 V AC supply to be provided by COEP at the sign location as per our requirement

Electrical Work

Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED Panel light (slim edge-lit) 600X600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete

Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating PVC armoured cable 4 core 16 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW

Supplying & erecting mains with2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (Half the rate of 2 X 1.5)

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wirelaid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-M

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wirelaid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (Half the rate of 2 X 2.5)

Supplying & erecting mains with2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification No: WG-MA/BW (Half the rate of 2 X 4)

Supplying & erecting mains with 3x4 sq.mm FR copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW

Supplying & erecting T8 LED 18W tube light fitting (4 feet) withpolycarbonate housing, heat sink, ntegrated HF electronic driver complete (including lamp).

Supplying and erecting modulartype switch6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutterISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modulartype switch one way 16 / 20 A, ISI mark, approved make duly erected on provided plate and box with wiring connections complete with neon indicator.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying &erecting original 1.25 mm CRCA sheet metal enclosureswith 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with20A/30A single pole MCB complete erected on angle iron/ G.I. frame.

Supplying and erecting Five Star Rated Energy Saving Ceiling Fan230 V A.C. 50 cycles 1200 mm complete erected in position as per specifcation no.FG-FN/CF

Supplying and erecting modulartype electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. Note: Add Rs 60/- provision of additional two modules for box and double plate

Supplying & erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW

Supplying and erecting rigidPVC conduit 25 mm dia.with PVC accessories on wall /ceiling as per specification No: WGMA/CON, para no. 1.1.1

Supplying and erecting rigidPVC conduit 20 mm dia. With PVC accessories on wall / ceiling as per specification No: WG-MA/CON, para no. 1.1.1

Supplying and erectingPVC trunking (PVC casing-ncapping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2

Supplying and laying (including excavation) 50 mm outside dia. double wall corrugated pipes (DWC)of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and fixing Tool-lessInformation Outlet (Ethernet) flush/surface typein position as perspecification no.WGNAS/IO

Supplying & installing UTP networking Cat-6 cablesuitable for LAN / WAN Computer net-working as per specification No.WG-COC/NC

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking SPN MCB 40A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPN MCB 40A to 63A, C Series in provided distribution board as per specification No.SW-SWR/MCB

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SW-RCCB/RCCB

Providing, erecting & commissioning RCCBof electro magnetic typewith 30/100/300 mA sensitivity and having capacity of 63A. 4 pole complete as per specification No. SW-RCCB/RCCB

Supplying & erecting triple pole and neutral distribution board (TPNDB)surface/ flush mounted SP / TP of total 24 wayson iron / G.I. frame/wooden board. (Vertical Busbar type) as per specification No. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mountedsuitable for SPMCB of 24 ways, on iron / G.I. frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB

Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B. /T.P. M.C.B. /F.P M.C.B. complete erected on angle iron/ G.I. frame.

Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Providing & erecting floor / wall mounting, MCCB panel board with door suitable for three pole incoming 400A, 4 ways three pole outgoing up to 100A MCCB on iron frame in compliance of IEC 61439, as per specification no SW-SWR/MCCBPB. (Excluding MCCB'S)

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 400A complete as per specification no. CP-BB

Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB

Providing & erecting 3 Pole MCCB of 315/400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP.

Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.

HVAC Work

Supply of ductable split unit of 5.5 TR suitable for 230/250 v, 50 cycles,AC supply with environment friendly refrigerant with provided copper piping and drainage.

Supply of ductable split unit of 4.0 TR suitable for 230/250 v, 50 cycles,AC supply with environment friendly refrigerant with provided copper piping and drainage.

Supply of ductable split unit of 3.0 TR suitable for 230/250 v, 50 cycles,AC supply with environment friendly refrigerant with provided copper piping and drainage.

Supply of Cassette AC of 2.0 TR suitable for 230/250 v, 50 cycles,AC supply with environment friendly refrigerant with provided copper piping and drainage.

Supply of VRF Outdoor unit of 10 TR suitable for 360 v, 50 cycles,AC supply with environment friendly refrigerant with provided copper piping and drainage.

Supply of VRF Outdoor unit of 8 TR suitable for 360 v, 50 cycles,AC supply with environment friendly refrigerant with provided copper piping and drainage.

Supply of VRF Outdoor unit of 17 kW Cooling Capacity suitable for 360 v, 50 cycles,AC supply with environment friendly refrigerant with provided copper piping and drainage.

Providing and fixing of MS fabrication angle 50x5mm size

Supplying & erecting hard drawn copper pipe suitable for air conditioning system having 22 SWG thickness and inner dia/size 9.5 mm complete

Supplying & erecting hard drawn copper pipe suitable for air conditioning system having 22 SWG thickness and inner dia/size 22.22 mm complete.

Supplying & erecting hard drawn copper pipe suitable for air conditioning system having 22 SWG thickness and inner dia/size 12 mm complete.

Supplying & erecting hard drawn copper Y sizer Refnet

Temperature Control unit. Micro Controller

S,I, T & C of ducting for supply air of AC units with 22 gauge ducts

Supplying & erecting tile type modular diffuser made from aluminum sheet complete with powder coated matching to the ceiling shade for provided supply & return air.

Providing and fixing of Nitril Rubber 13mm Thermal

Providing and fixing of Aluminum Chollar Dampers

Providing and fixing of Architechtural Grilles on the outside of wall with proper waterproof sealant

Installation and commissioning of indoor and outdoor units

Supply and Installation of PVC Drain pipe with 6mm thick nitrile rubber

Supply and Installation of Flexible Canvass to Indoor Units