Construction of Sanitary and water Supply fitting and Electrification work at Forest Training School Barnoyan Poochal Kishtwar

Amount

(A) Sanitary , water Supply fitting and other allied work at Forest Training School:-Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides

Hand Packed Stone Filling in Horizontal level including cost of stones

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20% Plumb

Reinforced cement concrete work in slabls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering,

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and medium tensile steel bar

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete 50 mm thick with 20mm nominal size stone aggregate

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 100mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge :62.50mm nominal outer dia pipes.

Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply,capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge:20 mm dia. nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work 20 mm nominal bore

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make,weighing not less than 1.970 kg

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Coupling/Socket For 22.22 mm outer dia pipe

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. REDUCER For 22.22 mmx15.88 mm outer dia pipe

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end 20 mm nominal bore

Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings

PProviding and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc

Carriage of Sand

Carriage of Stone

Carriage of Agrigate

(B) Electrification of Forest Training School :-Wiring for light point/fan point/exhaust fan point/call bell point with 15 sq mm FRLS PVC calculated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq mn FRLS PVC insulated copper conductor single core cable etc, as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/reced medium class PVC conduit as required 2 x 2.5 sq. mm + 1 x2.5 sq. sq. mm earth wire.

2 x 4 sq. mm + 1 x 4 sq. sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 1 x 1.5 sq. mm.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 25 mm.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch connections etc. as required

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos 3 pin 5/6 A modular socket outlet and 2 nos 5/6 A modular switch, connections etc as required. (For light plugs to be used in non residential buildings)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing 5A to 32 A rating, 240/415 V, 10 kA, ‘’ C’’ curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc, as required Single Pole.

Single Pole and neutral

Supplying and fixing following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc. as required 1 or 2 Module (75mmX75mm).

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200 mmX75mm)

8 Module (125mmX125mm)

Supplying and fixing following way, horizontal type three pole and neutral sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutralb bus bar, earth bar, din bar, interconnections, powder painted including earthling etc as required. (But without MCB/RCCB/Isolator) 4 way (4+12), Double door

Supplying & fixing of 20 watt 4 ft long tube light batten type

Supplying and fixing of following electrical items with complete connection as required 1 MCB SPN 63 Amp

Angle/Batten Holder

Supplying & laying of following twin core cables 16 SQ. Mm

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC. 50 Hz supply including connections etc as required Ceiling fan 1200 mm sweep alongwith upto 1’-6" long fan rod

Supply and fixing of 35 Ltr Geysers

Supply and fixing of 1 H.P Induction Motor for water Pumping

Supply and fixing of 70 Watt Street Light including wall bracket etc complete job

Supply and fixing 300 mm exhaust fan

SAJAD HUSSAIN SHEIKH

Ayaz Hussain Sheikh