PERIODICAL SERVICES TO ALL JCOs/ORs MD ACCN OTM ACCN, REPAIRS TO JOINERY, PLASTER, FLOOR TILING, PLUMBING WORK, SANITARY FITINGS IN JCOs MD ACCN AND REPAIRS TO WALL/ CEILING PLASTER TO ALL OTM ACCN AREA COMES UNDER AOC CENTRE UNDER AGE B/R (S) II

Amount

M&L for Preparation of plastered or unplastered old decorated surfaces and applying one coat of white wash on walls complete all as specified and directed. NOTE : White washing will be done by roller only, after complete removal of old loose white wash flakes.

M&L for Preparation of plastered or unplastered old decorated surfaces and applying two coat of white wash on walls complete all as specified and directed. NOTE : White washing will be done by roller only, after complete removal of old loose white wash flakes.

Ditto all as per item No. 1 above but on ceiling surfaces complete all as specified and directed. NOTE : White washing will be done by roller only after complete removal of old loose white wash flakes.

Ditto as per item No 1 above but one coat of colour wash complete all as specified and directed. NOTE : Colour washing will be done by roller only after complete removal of old loose Colour wash flakes.

Ditto as per item No 1 above but one coat of oil bound distember on walls complete all as specified and directed. NOTE : OBD will be done by roller only after complete removal of old loose OBD flakes.

Ditto as per item No 1 above but two coat of oil bound distember on walls complete all as specified and directed. NOTE : OBD will be done by roller only after complete removal of old loose OBD flakes.

Ditto as per item No 1 above but one coat of oil bound distember on ceilings complete all as specified and directed. NOTE : OBD will be done by roller only after complete removal of old loose OBD flakes.

M & L Preparation of plastered or unplastered old decorated surfaces of wall and applying one coat of cement base paint complete all as specified and directed. NOTE : Cement Base Paint will be done by roller only after complete removal of old loose Cement base paint flakes.

M & L Preparation of plastered or unplastered old decorated surfaces of wall and applying two coat of cement base paint complete all as specified and directed. NOTE : Cement Base Paint will be done by roller only after complete removal of old loose Cement base paint flakes.

Complete removal of existing treatment on walls and applying two coats of OBD over 3mm thick Altek superfine putty over one coat of altek primer to obtain smooth regular/even finish using sand paper and applying two coats of OBD of any tint complete all as specified and as directed. NOTE : OBD will be done by roller only after complete removal of old loose OBD flakes.

M & L for one coats of synthetic enamel paint on wooden surfaces of any description, not otherwise described, over 10cm width or girth.including preparation of old painted surfaces complete all as specified and directed.

M & L for one coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise described, over 10cm width or girth.including preparation of old painted surfaces complete all as specified and directed.

M&L applying two coats of French polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler with one or more coats complete. complete all as specified and as directed.

M&L for Preparation of new plastered surfaces of walls and applying two coats of OBD over one coat of primer of any tint complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of new plastered ceiling surfaces complete all as specified and as directed.

M & L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over acoat of primer complete all as directed and as specified

M & L preparation of newly plastered surfaces of walls and applying two coats of colour wash over a coat of white wash complete all as specified and as directed.

M & L for two coats of Dr Fixit Rain coat including preparation of plastered surfaces of walls complete all as specified and as directed.

M&L for removing the Vegitation/ plant on roof/ wall in any position put the chemical to burn the roots of plant and repair with CM (1:3) and making good complete all as specified and as directed.

M&L For writing building Number on wall over 30 cm dia black paint base , and writing letters or figures ( Block, Roman, or Indian ) 10 cm high in white colour paint complete all as specified and directed.

M&L for complete removal of existing treatment including preparing surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX ULTIMA of Asian Paints or equivalent of Berger/Nerolac) over a coat of primer including 3mm thick wall care putty complete all as specified and directed.

M&L Prepration of Old decorated surfaces of walls and applying one coats of weather proof exterior emulsion paint (APEX ULTIMA of Asian Paints or equivalent of Berger/Nerolac) over a coat of primer including filiing all cracks with approved crack filler upto four storey height complete all as specified and directed.

M&L for complete removal of existing treatment including preparing surfaces of wall and finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm over a coat of primer including 3mm thick wall care putty complete all as specified and directed.

Taking down cement plaster from brick or concrete surface of walls/ celing etc., including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick in cement mortar 1:6 over brick work including finishing fair and even and smooth without using extra cemen in patche work up to height 7.50 mtr incl necessary form work complete all as specified and directed.

M&L for rendering 15 mm thick on brick work or concrete surface in CM 1:4 including water proofing compound (WPC) and finished the surface smooth and even without using extra cement. all as specified and directed. Note: WPC will be measured and paid separatley.

M&L for rendering 10mm thick on ceiling/sun shande surfaces in CM 1:4. finished the surface smooth and even without using extra cement all as specified and directed. Note: Path work upto height 7.50 mtr incl necessary form work.

S& F Rotational moulded PVC water storage tank hoisted and fixed in positon of 500 ltrs capacity incl dismantling existing water tanks all as specified and as directed.

S& F Rotation moulded PVC water storage tank hoisted and fixed in position 1000 ltrs capacity incl dismantling existing water tanks all as specified and as directed.

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated aluminium rod and high dessity plastic ball screwed for iron pipe and fixed ( minimum weight 455 gms) all as specified and as directed.

S&F 20mm Ball valves high pressure of PTMT with epoxy coated aluminium rod and high dessity plastic ball screwed for iron pipe and fixed ( minimum weight 455 gms) all as specified and as directed.

Taking up or down steel tubing and connections of 15mm dia complete all as aspecified.

Ditto- all as per item No 32 above but of 20mm dia all as specified and as directed.

S&F 15MM dia steel water tubing medium grade galvanised with all fittings & fixing complete to walls & ceilings or laid in floors all as specified and as directed.

S&F 20MM steel water tubing medium grade galvanised with all fittings & fixing complete to walls & ceilings or laid in floorsall as specified and as directed.

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed.

M & L providing cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

All as per item No. 38 above but each tile exc 0.11 Sqm but n.exc 0.18 Sqm.

M & L for chequered cement concrete tiles size 30cmx30cmx20-25mm thick set, jointed and pointed with grey cement and pigment including 15mm thick screed bed in CM 1:4 all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) finished fair and even as in sub base flooring complete all as specifiead and as directed.

Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each.

All as per item No. 42 above but area exc 1.5 sqm but n.exc 4 sqm each.

Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each all as specified and directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S & F in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions and as directed by Engineer-in-charge.

S & F pressed steel frames for doors size 105x60 with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified.

S & F 35mm thick plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply the size of rail and stile as per IS-1003 (Part-10 kiln seasoned and chemically pressure treated complete all as specified.

S &F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.20 (a)

S&F steel window with side hung shutters including projection type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window all as specified and directed.

All as per item No. 50 above but without glazed bars.

S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.

S & F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S & F 150mm long Aluminium anodised, handle of extruded section and fixed all as specified and as directed.

S&F MS butt hinge 100mm long medium weight, mild cold rolled mild steel, and fixed complete all as specified and as directed

S & F stainless steel butt hinges 100mm long with stainless steel hing pin.

S & F 300mm long MS ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and as directed.

M & L for preparation of new wooden surfaces of any description ,not other wise described over 10 cm width or girth applying 2 coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M & L for preparation of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of red oxide zink chrome primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads complete all as directed.

All as per item No. 60 above but from metal frames including punching or drilling out old glazing pins/spring clips complete all as directed.

S & F 4mm thick sheet glass ordinary quality fixing with putty in square n.exc 0.5 sqm in each pane all as specified and directed.

S & F galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples all as specified and directed.

S & F fixed in repairs galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples all as specified and directed.

S & F MS framed work such as grills or grating etc with ends of bars welded of anysize and any design all as directed of Fe-290 Grade E-165 all as specified and directed.

S & F mild steel flat iron hold fast of any size and similar articles conforming Fe 290 GradeE-165 all as specified and directed.

M& L for PCC (1:3:6) type C1 using 120mm graded stone aggregate as in lintels blocks, copings, etc for filling of back side MS chowkat etc all as specified and directed.

M & L for cutting holes in brick walls built in CM etc, half brick but n.exc one brick and making good dismantled portion in CM (1:3) or cement concrete 1:2;4 type B1 as required all as specified and directed.

S & F in repairs 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms). all as specified and directed.

S & F in repairs 15mm bore bib taps, brass chromium plated, screwed down, screwed for iron pipe or for brass ferrule including flench as in repair complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm long all as specified and as directed

S & F 15mm bore pillar taps brass chromium plated, screwed down, high pressure with or wihtout lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, fixed in repairs complete all as specified and directed.

S & F 15mm bore chromium plated fancy type angle cocks/stop valves brass, screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union in repair complete all as specified and directed.

S & F in repairs vitreous china squatting pan 'Orissa pattern' size 580 x 440mm white with integral foot rest including replacement of 'P' or 'S' trap lime concrete bedding and making good floors complete all as specified and directed.

S&F EWC Pedestal pattern WC ,any colour incl EWC seat Cover,10 ltr capacity PVC ,LLFC,32 mm dia PVC flush pipe including CP Toilet Paper holder etc complete all as specified and directed.

S & F (in repairs) PVC low level flushing cistern 10 litres capacity, syphonic action type, white, as approved including ball valve float valve and handle, flush pipe as in repair complete all as specified and directed.

S & F (in repairs) vitreous china, wash hand basin white size 550 x 400 mm including brackets, chromium plated waste coupling & PVC waste pipe of 32mm dia complete all as specified and directed.

S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe all as specified and directed.

S & F in repairs chromium plated 125mm shower rose with or without swivel joints any size including fixing to steel pipe or union all as specified and directed.

R G NAIDU CIVIL CONTRACTOR AND BUILDERS

abhilasha constructions

G RANGA RAO

M/S AKSHATHA ENTERPRISES

M/S Sekhar Infra Projects

S.R.M.K Enterprises

SREE KIRAN ENGINEERS

BEEGEE DESIGN SYSTEMS

K LAKSHMAN SINGH AND CO