DP22, Kaveriyammapatti Primary Agricultural Co-operative Credit Society, Kaveriyammapatti,

1. Proposed Construction of RCC Roofed Office Building with strong room with defendable door in Ground floor for DP22, Kaveriyammapatti Primary Agricultural Co-operative Credit Society, Kaveriyammapatti, Kaveriyammapatti village and Panchayat, Oddanchatram Block, Oddanchatram Taluk, Palani Circle, Dindigul District. Estimate Amount Rs.61.00 Lakhs

Earth work excavation for foundation in all soils and sub soil & to full depth as may be directed except in hard rock requiring blasting inclusive of shoring, strutting and bailing out water, wherever necessary and refilling the sides of foundation with excavated earth in 15 cm thick layers well rammed and depositing the surplus earth within the compound in places shown by the departmental officers with all leads and lifts etc., complete complying with standard specification

Filling the foundation pits / trenches with filling sand or M.sand as levelling course including watering and consolidation

Plain Cement Concrete 1:4:8 (One cement,four sand and eight hard broken granite stone jelly) using 40mm stone jelly as foundation bed concrete including dewatering wherever necessary and laid in layers of not more than 15 cm thick complying with standard specification

Reinforced Cement Concrete 1:1.5:3 ( One cement,1.5 sand and three hard broken granite stone jelly) using 20mm stone jelly for column footings excluding cost of reinforcement grill, centering, shuttering but including placing the grills in position, curing, finishing all the RCC works and as directed by the departmental officers etc., complete complying with standard specifications

Reinforced Cement Concrete 1:1.5:3 ( One cement,1.5 sand and three hard broken granite stone jelly) using 20mm stone jelly for columns excluding cost of reinforcement grill, centering, shuttering but including placing the grills in position, curing, finishing all the RCC works and as directed by the departmental officers etc., complete complying with std. specifications

a) Upto basement level

b) In superstructure above basement and up to roof level

c) In superstructure above roof level

Reinforced Cement Concrete 1:1.5:3 ( One cement,1.5 sand and three hard broken granite stone jelly) using 20mm stone jelly for Grade beams excluding cost of reinforcement grill, centering, shuttering but including placing the grills in position, curing, finishing all the RCC works and as directed by the departmental officers etc., complete complying with standard specifications

Brick work with Cement mortar 1:5 (one cement and five sand) for the superstructure ( using standard wire cut bricks) including curing etc.,

a) Below basement level

b) Above basement level

c) Above roof level

Reinforced Cement Concrete for basement belt with mix 1:1.5:3 (One cement,1.5 sand and three Hard broken granite stone jelly) using 20mm jelly for the entire building excluding cost of reinforcement grill, centering, shuttering but including placing the grills in position, curing, finishing all the RCC works and as directed by the departmental officers etc., complete complying with std. specifications

Gravel filling for the basement with Pallam river sand or locally available gravel as filling material for the basement including watering and consolidation

Reinforced Cement Concrete Sill beam with mix 1:1.5:3 (One cement,1.5 sand and three Hard broken granite stone jelly) using 20mm jelly for the entire building excluding cost of reinforcement grill, centering, shuttering but including placing the grills in position, curing, finishing all the RCC works and as directed by the departmental officers etc., complete complying with std. specifications

Lintel, sunshade concrete in Reinforced cement concrete 1:1.5:3 (one cement,1.5 sand and three hard broken granite stone jelly) mix using 20 mm HBG stone jelly for the entire building excluding cost of reinforcement grill, centering, shuttering but including placing the grills in position, curing, finishing all the RCC works and as directed by the departmental officers etc., complete complying with std. specifications

Reinforced cement concrete Roof beam with mix 1:1.5:3 (one cement,1.5 sand and three hard broken granite stone jelly) using 20 mm HBG stone jelly for the entire building excluding cost of reinforcement grill, centering, shuttering but including placing the grills in position, curing, finishing all the RCC works and as directed by the departmental officers etc., complete complying with standard specifications

Reinforced cement concrete Roof slab with mix 1:1.5:3 (one cement, 1.5 sand and three hard broken granite stone jelly) using 20 mm HBG stone jelly for the entire building excluding cost of reinforcement grill, centering, shuttering but including placing the grills in position, curing, finishing all the RCC works and as directed by the departmental officers etc., complete complying with standard specifications

Centering for soffits of reinforced cement concrete slabs, plane surfaces including strutting 3 m height using M.S.plate of size 90cm x 60cm and 10 gauge stiffened with welded mild steel angles of size 25x25x3mm laid over silver oak ( country wood) joists of size 10cmx6.5cm spaced at about 90cm c/c and supported by casurina props of 10cm dia with 60 cm c/c complying with std. specification

a) For column footing, column, grade beam and belt beam - below basement level

b) Above basement level

c) Above roof slab level

d) For strong room

Supplying, fabricating and placing the grills in position of M.S (or) RTS rods reinforcement grills for all RCC works including cost of steel rods and binding wire ( The M.S (or) RTS rods along with the binding wire shall be contractors own cost)

Ceiling plastering using Cement Mortar 1:3 (one cement and three sand) 10mm thick for the entire building including curing etc.as per the specifications ,

Inner plastering for all walls in Cement Mortar 1:5 (one cement and five sand) mix 12mm thick including curing etc., complete complying with standard specifications

a ) Below basement level

b) Above basement level

External wall plastering in Cement Mortar 1:5 (one cement and five sand) mix 12mm thick including curing etc., complete complying with standard specifications.

White washing two coats with best shell lime including preparation of wall ceiling, inner plastering and external plastering portions

Colourwashing the internal ceiling portions and internal wall portions with proper putty finishing two coats, one coat of primer and two coats of good quality interior water emulsion - The rate includes all types of preparatory works, brushes, other tools etc

Colourwashing the external portions, one coat of primer and two coats of good quality Exterior water emulsion

Fabricating and supplying good qualiy First class UPVC windows including fabrication, window grill work with steel square rods of 14mm size with proper design alround and middle are to be used - The steel grill work should have a weight of about 20 Kg per Sqm - The design and fabrication should be done as per the working drawings of the departmental officers or Chartered Engineer - UPVC Window fabrication - Outer frame - 60 mm x 60 mm Size , Shutter frame - 66 mm x 42.5 mm size, Glass - 5 mm for 1.83 m x 1.22 size widow and 4 mm for below size windows- All pinned glasses - fixing screws should be of nylon anchor screws of size 8 mm x 80 mm - Silicon gap sealer should be used - All UPVC profiles are should of Standard quality

Supplying and fixing 18 gauge steel rolling shutters for a clear opening of 1.83 m x 2.13m and of approved make including supplying and fixing top hood cover and all other accessories locking arrangements etc. with one coat of red oxide primer.

Providing wooden Main double door with good quality materials and fittings. Wooden main door may be partly panelled with glass (including labours,painting etc.,) - as directed by the departmental officers. Vertical and horizontal posts - 150 mm x 125 mm size, door panel - 50mm thick

Painting two coats for both sides of all the doors, windows with good quality enamel paint after the preparation work - The numbers include the painting co efficients- Painting as per the standard specifications

Flooring with Plain cement concrete 1:4:8 (one cement, four sand and eight hard broken granite stone jelly) mix using 40mm HBG stone jelly, well rammed etc.,150 mm thick .

Floor finishing Using Good Quality Marbonite of size 0.60mx0.60m, 8 mm thick - first class quality for the Entire Building Over Cement mortar mix 1:5 (one cement and five sand) - The make and brand of the marbonite should be got approved by the departmental officers

Portico portion- Providing and laying Vitrified tiles in floor of size 0.40mx0.40m, 10 mm thick- first class quality for the Entire portion Over Cement mortar mix 1:5 (one cement and five sand) - The make and brand of the tiles should be got approved by the departmental officers.

Toilet portion- Providing and laying ceramic tiles walls of size 0.40mx0.40m, 6 mm thick- first class quality for the Entire portion Over Cement mortar mix 1:5 (one cement and five sand) - The make and brand of the tiles should be got approved by the departmental officers.

Weathering course using concrete broken brick jelly 20mm gauge in pure slacked lime over RCC roof slab in proportion 32:121/2 well beaten by wooden beater for giving required slope etc., complete complying with standard specifications

Finishing the top of roof with one course of machine pressed tiles of size 23 x23 x 2 cm of approved quality laid in cement mortar 1:3 (one cement and three sand) mixed with water proof compound at 2% by weight of cement used and pointed with the same mortar etc., complete.

Reinforced Cement Concrete Wall with mix 1:1.5:3 (One cement,1.5 sand and three Hard broken granite stone jelly) using 20mm jelly for the Strong room excluding cost of reinforcement, grill centering shuttering but including placing the grills in position, curing, finishing all the RCC works and as directed by the departmental officers etc., complete complying with standard specifications

Annexure B: Providing Internal and External Electrification arrangements

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator).

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter lockingWall socket with 5A Flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking Wall socket with 15A Flush type switch with continuous earth wire connection of 14 SWG TC wire , and making good of the concealed portion, with suitable colour for concealed power plug point

Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour

Supply and fixing of 5A 3 Pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS Box in flush with wall and concealed with 3mm thick Hylem sheet with suitable painting.

Supply and fixing of 20W 4 Feet LED Fitting with LED (Higher End Philips /Havells /Equivalent) suspension from wall with PVC unsheathed Copper leads from terminals to the fitting with LED, clamp with screw etc., complete

Supply and fixing of 25W LED street light outdoor fitting with LED (Light Emitting Diode) complete with 19mm dia GI pipe (Class 'B') with 1 No. 19mm GI bend complete on the existing post / wall with PVC unsheathed copper leads with MS clarnps and aluminium painting.

Supply and fixing of 40 Amps Double pole MCB Isolator on suitable sheet steel enclosure for MCB in wall with earth connection

Supply and fixng of TNEB Meter Board suitable for 3 Phases 100A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1 1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 100A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete

Annexure C: Providing Internal & External water supply and sanitary arrangements

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Departmental officer or Engineer before use on works). Above Ground Level

110mm dia PVC Pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Departmental officer or Engineer before use on works).

Double "Y" with Door (Single)

110mm dia

PVC Elbow with Door

110mm dia

PVC Tee

110mm dia

PVC Elbow

110mm dia

Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Departmental officer or Engineer before use on works).

110mm dia PVC cowl

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron with stainless steel gratings of size 75mm x 50mmat junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Supplying, laying and jointing UPVC pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Departmental officer or Engineer before use on works.

Internal Water Supply Arrangements using UPVC pipes (Concealed)

20mm dia UPVC pipe

Supplying, laying and jointing UPVC pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc.,complete complying with standard specifications. The UPVC pipes shall be got approved by Departmental officer or Engineer before use on works.

External Water Supply Arrangements using UPVC pipes

32mm dia UPVC pipe

25mm dia UPVC pipe

Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements) Note: Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separate provision for fixing UPVC specials needs to be allowed

Coupler

Elbow

End Cap

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Departmental officer or Engineer before use on work.

25mm dia

Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings. such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Departmental officer or Engineer before use on works)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes of 100 x 75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Departmental officer or Engineer before use on works)

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (with pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Departmental officer or Engineer before use on works).

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Departmental officer or Engineer before use on the works)

Screw Down Tap

Stop Cock

Supplying and fixing best approved best quality Stainless Steel Health Faucet with Stop cock of best approved quality including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (Health faucet should be got approved by the Departmental officer or Engineer before use on the works)

Supplying and fixing in position of best Indian make PVC Water Tank of required capacity conforming to ISI standards as directed by the departmental officers including cost of material and conveyance charges of material to work site etc., complete complying with standard specifications. (The PVC Water Tank should be got approved by the Departmental officer or Engineer before use on woks)

Annexure D: Proposed Construction of Underground water tank (sump)

Earth work excavation for foundation in all soils and sub soil & to full depth as may be directed except in hard rock requiring blasting inclusive of shoring, strutting and bailing out water, wherever necessary and refilling the sides of foundation with excavated earth in 15 cm thick layers well rammed and depositing the surplus earth within the compound in places shown by the departmental officers with all leads and lifts etc., complete complying with standard specification

Filling the foundation pits / trenches with filling sand or M.sand as levelling course including watering and consolidation

Plain Cement Concrete 1:4:8 (One cement,four sand and eight hard broken granite stone jelly) using 40mm stone jelly as foundation bed concrete including dewatering wherever necessary and laid in layers of not more than 15 cm thick complying with standard specification

Providing floor finishing with ellispattern concrete of mix 1:2:4 (one cement, two sand and four stone chips) using 6 mm size jelly for 50 mm thick and finished smoothly with skilled labour finishing

Brick work with Cement mortar 1:5 (one cement and five sand) for the superstructure (wire cut bricks) including curing etc.,

Precast reinforced cement concrete slabs 50 mm thick with mix 1:1.5:3 (one cement, 1.5 sand and three hard broken granite stone jelly) using 20 mm HBG stone jelly,10 mm and 6 mm for the sump and Manhole cover including cost of reinforcement grill, placing the grills in position, casting ,curing, finishing all the RCC works and as directed by the departmental officers etc., complete complying with standard specifications

Plastering in Cement Mortar 1:5 (one cement and five sand) mix 12mm thick including curing etc., complete complying with standard specifications.

White washing two coats with best shell lime including preparation of wall ceiling, inner plastering and external plastering portions

Annexure E: Proposed Construction of Septic tank

Earth work excavation for foundation in all soils and sub soil & to full depth as may be directed except in hard rock requiring blasting inclusive of shoring, strutting and bailing out water, wherever necessary and refilling the sides of foundation with excavated earth in 15 cm thick layers well rammed and depositing the surplus earth within the compound in places shown by the departmental officers with all leads and lifts etc., complete complying with standard specification

Filling the foundation pits / trenches with filling sand or M.sand as levelling course including watering and consolidation

Plain Cement Concrete 1:4:8 (One cement,four sand and eight hard broken granite stone jelly) using 40mm stone jelly as foundation bed concrete including dewatering wherever necessary and laid in layers of not more than 15 cm thick complying with standard specification

Providing floor finishing with ellispattern concrete of mix 1:2:4 (one cement, two sand and four stone chips)using 6 mm size jelly for 30 mm thick and finished smoothly with skilled labour finishing

Brick work with Cement mortar 1:5 (one cement and five sand) for the superstructure (wire cut bricks) including curing etc.,

Baffle wall - Brick work with Cement mortar 1:5 (one cement and five sand) for the superstructure (wire cut bricks) including curing etc.,

Precast reinforced cement concrete slabs of 50 mm thick with mix 1:1.5:3 (one cement, 1.5 sand and three hard broken granite stone jelly) using 20 mm HBG stone jelly for the Septic tank including 2 nos of Manhole cover including cost of reinforcement grill, placing the grills in position, casting ,curing, finishing the works and as directed by the departmental officers etc., complete complying with standard specifications

Internal wall plastering in Cement Mortar 1:5 (one cement and five sand) mix 12mm thick including curing etc., complete complying with standard specifications.

White washing two coats with best shell lime including preparation of wall ceiling, inner plastering and external plastering portions

Annexure F: Providing New bore well with Mini Power Pump

Conducting Geo Physical survey test Reports

Drilling of 150mm dia borewell in Overburden soil area anywhere in Dindigul District in the place shown by the officers including transportation of Rig and supporting vehicle from one place to another place including fuel, labour, etc completed

Drilling of 150mm dia borewell in hard rock area anywhere in Dindigul District in the place shown by the officers including transportation of Rig and supporting vehicle from one place to another place including fuel, labour, etc completed

Supply and errection of 150mm casing pipe as per IS 12818/1992 including all labour charges etc., complete.

Borecap using M.S. Flat of size 10mm x3mm M.S. Sheet on top with Bolting arrangements for securing the cap in position (Bore caps with MS Couplings) need not be made.

Construction of pedestal tank support wall size 1.40m dia x 0.60m height of brick work in CM 1:5 using country brick of size 8 3/4 x 4 1/4 x 2 1/4 as per TWAD Board type design including painting two coats and name board lettering etc., complete

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labourcharges for fixing of the GI pipes andspecials for pipe connection works includingcutting, threading and fixing charges etc., (1000 litres)

Construction of pedestal for K150K with size 0.75 x 0.45 x 1.80 in an using bricks of size 8 3/4 x 4 3/4 x 2 1/4 as per TWAD Board type design including painting etc., complete.

Supply and delivery of MS KISOK box size 0.75 x 0.45 x0.75 for fixing meter board, switch board with lock and key arrangements including painting two coats

Supply and delivery single phase of the submersible pumpset 20LPM x 125m head of 1.5 HP etc., complete.

Supply and delivery Single Phase Panel board With Two Level Guard and Auto Start 1.5 HP etc., complete.

Supply and delivery of 2.5 sqmm pvc insulated and sheathed 3 core flat coper cable conforming to IS -694/1990

Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains - SD 69

Supply and delivery of 32 mm UPVC Column Pipe for Submersible pumpset to a bore well as per IS 15328/2003

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains - SD 64

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit

Supply and fixing of 16 Ams Main Switch

Earthing as per standard specification

Cost of Materials and labour charges for Mini power Pump works (as per list)

20mm GI Coupling

32mm H nipple

20mm H nipple

32mm GI Elbow

32mm GI union

32mm GM gate valve

32mm GM weel valve

20mm tap

20mm GI pipe

32mm GI pipe

32 mm PVC pipe

32 mm PVC MTA

Supply and fixing of 32mm MS clamp set

Cost and supply of 12mm nylon rope

Erection of power pumps in bore well labour charges for erection of twin pacher duplex type pumpsets in borewells upto 150mm dia including of suffer five regulating valves with motar assembly upto a maximum depth of 200 metre and delivery pipe valves presure gaugesthe extexior wall of pump room erection of pannel board consisting TPICN Switches, starter, voltmetred, Ammetter. Three indicates lamps, capacitors and laying and jointing of cables and twin earthing as per IE rules etc,complete

Provision for Rain Water Harvesting

Earthwork open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc., as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.

Lowering PVC/ DWSC rigid pipes and specialsto trench and laying to proper grade andalignment, jointing with PVC couplers with cement paste with standard specification

Refilling with excavated soil (other than sand) complying with standard specification

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Please Enable Macros to View BoQ information