PERIODICAL SERVICES AND WELCOME MAINTENANCE TO MD AND OTM ACCN AT MIL STN UDAIPUR UNDER AGE (I) UDAIPUR

Amount

Taking down wooden chowkats or frames with shutters area not exceeding 1.50 Sqm (w/o taking off shutters from frames) and removing from site, and rep to disturb portion with PCC 1:2:4 or CM 1:4 complete all as specified and as directed by Engr-in-Charge.

Taking down chowkats or frames area exceeding 1.50 Sqm and not exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, and rep to disturb portion with PCC 1:2:4 or CM 1:4 complete all as specified and as directed by Engr-in-Charge

Taking down shutters of any description not exceeding 1.00 Sqm each, from chowkhat complete all as specified and as directed by Engr-in-Charge

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, from chowkhat complete all as specified and as directed by Engr-in-Charge

Taking down shutters of any description exceeding exceeding 2.00 Sqm each, from chowkhat complete all as specified and as directed by Engr-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding/rendering complete all as specified and as directed by Engr-in-Charge.

Material and Labour for Non-skid jointless coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge.

Material and Labour for Vitrified digital double charge tiles 10 mm thick ( square or rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors etc. set and jointed with Balendura adhesive or equivalent as approved by AGE and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and as directed by Engr-in-Charge.

All as per above item No. 08 but in skirting to walls including 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface complete all as specified and as directed by Engr-in-Charge

Material and Labour for Glazed ceramic coloured tiles in vertical surfaces 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge

Material and Labour for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, pillars, window cills, cooking platforms including half round moulding as reqd, making hole for gas pipe etc. and like in cement mortar (1:4) incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick CM 1:6 screed bed complete all as specified and as directed by Engr-in-Charge.

M&L for 18-20 mm thick green marble slabs on window cills/shelf/flooring with & including half round edge moulding and laid over cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match etc complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-Charge.

Material and Labour for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base/mass concrete and finished the top surface even and fair complete all as specified and as directed by Engr-in-Charge.

Material and Labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub base/levelling coarse and finished the top surface even and fair complete all as specified and as directed by Engr-in-Charge.

Material and Labour for Vitrified out door tiles 400x400x10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6, complete all as specified and as directed by Engr-in-Charge

Material & labour for fabrication of pressed steel cupboard shutter using 1mm thick MS plain sheet with frame 1.25mm thick bent to shape including two coat of synthetic enamel paint on internal surfaces & two coat of hammer tone finish on external surface alongwith locking arrangement mortice lock ,handle etc complete all as specified as per drg No CEJZ/TD/12/2008 sheet 1/3 to 3/3 complete all as specified and as directed by Engr-in-Charge.

Supply and fixing, factory made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed. Material test certificate and authentication should be compoulsory provided by the manufacturing company complete all as specified and as directed by Engr-in-Charge.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engr-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) complete all as specified and as directed by Engr-in-Charge.

Supply and fixing, factory made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 90 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company complete all as specified and as directed by Engr-in-Charge.

Supply and fixing factory made solid PVC moulded door shutter with wood free EPS 28 to 30 mm thick (Stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front page and 2 mm plane colour PVC sheet on back face supplying and fixing in frames at site as per speicfication and drawing complete all as specified and as directed by Engr-in-Charge.

Supply & fixing door eye/Eye hole viewer 360 degree with crystal clear lens panoramic view for main door complete all as specified and as directed by Engr-in-Charge

Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge

Supply & fixed 150 mm long 10mm dia Extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed by Engr-in-Charge

Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and as directed by Engr-in-Charge

S&F 100 mm long stainless steel butt hinges medium weight with galvanised MS hinge pin etc complete all as specified and as directed by Engr-in-Charge.

S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and as directed by Engr-in-Charge.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and as directed by Engr-in-Charge.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge

Taking up or down steel tubing and connections of 15mm bore including cleaning for refixing or removal to store provision for branch connection by inserting tee union elbow etc. complete all as specified and as directed by Engr-in-Charge

All as item above but 20mm bore, complete all as specified and as directed by Engr-in-Charge

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction of complete all as specified and as directed by Engr-in-Charge.

Material & Labour Steel Tubes 20mm bore, 'medium grade', galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repair toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws etc. complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing in repair Corner glass shelf size 200 mm radius with and including bracket and glass complete set etc complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge

Supply and Fixing in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron trap portion to match with the existing surface of floor complete all as specified and as directed by Engr-in-Charge

Supply and Fixing in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe including connection to out going pipe and flushing pipe complete all as specified and as directed by Engr-in-Charge

Supply and Fixing in repair vitreous china wash basin white flat back size 550 x 400mm with pedestal excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners complete all as specified and as directed by Engr-in-Charge

Supply & Fixing in repair stainless steel 300mm long hat pegs of 6 Nos peg set of good quality complete all as specified and as directed by Engr-in-Charge

Supply and Fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed by Engr-in-Charge

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample including taking down existing curtain rod complete all as specified and as directed by Engr-in-Charge.

Supply & fixing in repair of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair complete all as specified and as directed by Engr-in-Charge.

Supply & fixing of stainless steel decorative finials (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repair complete all as specified and as directed by Engr-in-Charge

Supply & fixing of stainless steel decorative finials wall to wall trade pattern suitable for decorative type curtain rods 22 to 25mm dia as per sample as in repair complete all as specified and as directed by Engr-in-Charge

Supply and Fixing in repair floor door stopper of aluminium alloy body and tongue two legged , anodised, with hard drawn steel spring, fixed in floor 150mm length complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/steel frame complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repair PVC floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement type B1 (1:2:4) complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed by Engr-in-Charge.

Material and labour for anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engr-in-Charge. Note minimum thickness of powder coating 50 micron.

Supply and fixing anodised aluminium window and ventilator shutters,powder coated side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing 5.5 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing for 3mm thick plain Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified and as directed by Engr-in-Charge

Supply and fixing for 4mm thick figured glass, ordinary quality and glazing rubber beading in square nexc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-Charge

S&F in repairs 18 mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works, complete all as specified and as directed by Engr-in-Charge

All as per itemNo.56 above but 18 mm thick Plain PVC celuka ply -ditto- complete all as specified and as directed by Engr-in-Charge.

S&F in repairs brass handle fabricated type polished of size 75 mm, complete all as specified and as directed by Engr-in-Charge

Supply & fixing in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of width of flaps (when open) in 30mm complete all as specified and as directed by Engr-in-Charge

Supply & Fixing in repair magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, overall length of cover plate 140mm long complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing in repair self closing/auto Casement type hinges 90/180 degree complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing in repair requisite size stainless steel kitchen rack, basket Trolley grill type or perforated type or wire type or other any type of approved make complete all as specified and as directed by Engr-in-Charge

Supply & Fixing in repair Telescopic steel channel ball bearing drawer channel silver/chrome plated size 250/300 mm etc complete all as specified and as directed by Engr-in-Charge

Supply and fixing in repair 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified and as directed by Engr-in-Charge

Material and Labour for Preparation of old surfaces of ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling complete all as specified and as directed by Engr-in-Charge

Material and Labour for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and as directed by Engr-in-Charge

Material and Labour for subsequent coat of distemper oil emulsion ( White/ Ivory or any colour) over one coat applied under Srl item No 66 here in before complete all as specified and as directed by Engr-in-Charge.

Material and Labour for applying 1 mm thick weather coat Asian/Birla/JK wall care white putty in two layers including complete removal of existing treatment of internal or exxternal walls, roof projection, fins and fascia etc. with wire brush or any manual other mechanical method by manual and reaching upto old plastered surface complete all as specified and as directed by Engr-in-Charge.

Material and Labour one coat of exterior emulsion paint white or tinted on old treated walls or fascia of roof or chajjas on prepared putty surfaces of bldg upto tripple storeys bldgs complete all as specified and as directed by Engr-in-Charge

Material and Labour for one coat of exterior emulsion paint white or tinted on walls or fascia of roof or chajjas width between 10 cm to 20 cm on prepared putty surfaces or old painted surfaces of bldg upto tripple storeys bldgs including filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and as directed by Engr-in-Charge

Material and Labour for applying one coat of synthetic enamel paint on wooden surfaces or wood based surfaces of any description, over 10cm in width or girth including preparation of old surfaces complete all as specified and as directed by Engr-in-Charge

Material and Labour for applying one coat of synthetic enamel paint on steel surfaces of any description, over 10cm in width or girth including preparation of old surfaces complete all as specified and as directed by Engr-in-Charge.

Material and Labour for 15mm thick plaster in cement mortar 1:6 on fair faces of brick or concrete surface and finishing the surface even and smooth (without using extra cement ) including taking down plaster of walls scrubbing down with water and dispose of dibries where directed by EIC, complete all as specified and as directed by Engr-in-Charge

Material and Labour for 10mm thick plaster in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement ) including taking down plaster of walls scrubbing down with water and dispose of dibries where directed by EIC, complete all as specified and as directed by Engr-in-Charge

Supply only liquid water proofing compound, ISI marked complete all as specified and as directed by Engr-in-Charge

Material and Labour for applying two coat of oil bound distemper incl preparation of newly plastered surfaces of walls, pillars cornices etc complete all as specified and as directed by Engr-in-Charge

Material and Labour for applying three coat of white wash on ceiling surfaces incl preparation of newly plastered ceiling surfaces complete all as specified and as directed by Engr-in-Charge

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcement as required to facilitate demolition, complete all as specified and as directed by Engr-in-Charge

Material and Labour for repairing of RCC projection, Chajjas, Facia,Bands, Shelves, Beam, RCC railing, Balcony and similar works by dismantling of loose / disuntegrated portion of RCC at any height and in any situation floor including provn of support with chicken wire mesh and dubbing/filling with PCC (1:2:4) type B-0 using 12.5 mm graded aggregate 15 to 25 mm thick after applying cement slurry @ 3 kg/sqm finished even and smooth to desired shape and applying two coats of finished to match with existing surfaces complete all as specified and as directed by Engr-in-Charge

Material and Labour for applying two coats glossy Indigo floor coat emulsion paint premium series or equivalent on existing old paver block/ chequered tiles foors any pattern including removing caked mud, trading oil and greasy spots, cleaning with water complete all as specified and as directed by Engr-in-Charge

M & L for Cleaning and removing, Exc 250 Ltrs but not exc 500 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of following capacity complete all as specified and as directed by Engr-in-Charge.

M & L for Cleaning and removing, Exc 500 Ltrs but not exc 1000 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of following capacity complete all as specified and as directed by Engr-in-Charge.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from trenches/wall complete all as specified and as directed by Engr-in-Charge

S&F 110mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, laid in trenches or in floor complete all specified and directed.

S&F 110mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, fixed to wall complete all as specified and as directed by Engr-in-Charge

S&F 75mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed by Engr-in-Charge

S&F 110mm dia UPVC (SWR) bends any radius including cutting of holes complete all as specified and as directed by Engr-in-Charge.

S&F 75mm dia UPVC (SWR) bends any radius including cutting of holes complete all as specified and as directed by Engr-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed by Engr-in-Charge.

Material & Labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade drawn through in concealed and PVC casing caping with all accessories as required and directed by Engr-in charge, fixed on the surface of Wall/ roof/ceiling / dash fasteners/ wooden gutties and cadmium plated screws as per IS on existing/new if required at site sunk type CI/GI Steel/Wooden terminal with suitable for regular/Modular boxes with 3 mm thick laminated sheet concealed in wall etc. including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly for. complete all as specified and as directed by Engr-in-Charge.

(a) One light point point controlled by one switch with cables 1.5 sq. mm size

(b) One fan/exhaust fan point controlled by one switch with cables 1.5 sq. mm size

(c) One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size.

(d) One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size.

(e) One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size.

(f) One light point controlled by two 2-way switches, with cables 1.5 sq. mm size.

(g) One power point with 2.5 sqmm copper conductor including 2.5 sqmm unsheathed copper continuity conductor connected to common earth dolly and controlled by one 15 Amp switch

All as per items No 90 above for one point for (AC/geyser point ) with PVC insulated unsheathed FR cable, 1100 volt grade multy stranded copper conductor of size 4.00 sqmm (Nominal area ) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4.0 sqmm (Nominal area ) cable common connected to earth dolly controlled by one switch complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing Switch piano, flush type single pole, one way 6 Amp complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing switch piano type, flush button single pole, two way 5/6 amps complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing bell push flush type single pole, 5 amps complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing Buzzer, Ding Dong AC. 230 volts, single pole. complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing switch piano flush type, single pole, one way 16 Amps complete all as specified and as directed by Engr-in-Charge.

M&L socket outlet 2 in 1, 3 pin, 6A flush type complete all as specified and as directed by Engr-in-Charge.

M&L socket outlet 2 in 1 ,3 pin, 5 Amps and 15 Amps flush type complete all as specified and as directed by Engr-in-Charge.

Supply & Fixingixing inreplacement of Ceiling rose, 3 phase/PVC/polycarbonate, isolated body for complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing inreplacement of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing inreplacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and as directed by Engr-in-Charge.

Disconnecting electric connections and taking down old unserviceable main switches/ DB’s sheet metal enclorsures 02 ways, 4 ways, 8 ways/ duly fitted with MCB’s/ cutouts 32 amps capacity including unserviceable wooden boards and making good the disturbed surface of the wall/ceiling. complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing MCB distribution box single door powder coated sheet metal encloser 240 volts SPN including 200 amps rated bus bar of the following type. complete all as specified and as directed by Engr-in-Charge.

(a) 12 ways

(b) 08 ways

(c) 04 ways

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of foour poles (TPN) and current carrying capacity 40 Amp to 100 Amp in the DB complete with connection testing and commissioning. complete all as specified and as directed by Engr-in-Charge.

Supply and fixing SPN 40 TO 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified and as directed by Engr-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. complete all as specified and as directed by Engr-in-Charge.

M & L for wiring for circuit/submain wiring in PVC conduit alongwith earth wire with the following sizes of 2x2.5 sq.mm + 1x2.5 sq.mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed as required. complete all as specified and as directed by Engr-in-Charge. Note : Two run of 2.5 sqmm cable with combined of R,Y & B and one run of 2.5 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.

M & L for wiring for circuit/submain wiring in PVC conduit alongwith earth wire with the following sizes of 2x4 sq.mm + 1x4 sq.mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed as required. complete all as specified and as directed by Engr-in-Charge. Note : Two run of 4 sqmm cable with combined of R,Y & B and one run of 4 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of uitable size from ceiling rose complete all as specified and as directed by Engr-in-Charge.

Taking down old U/S exhaust fan and supply and fixing metal/PVC frame exhaust fan of size 200mm sweep 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable GI pipe and supply and laying new GI pipe 20 mm dia medium grade incl all GI pipe fittings, for solar water heating system/Geyser of size ltrs/50 ltrs etc. complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable GI pipe and supply and laying new GI pipe 25 mm dia medium grade incl all GI pipe fittings, for solar water heating system/Geyser of size 25 ltrs/50 ltrs etc. complete all as specified and as directed by Engr-in-Charge.

Supply and replace Ball valves of size 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified and as directed by Engr-in-Charge.

Taking down & refixing geyser of cap 25 ltrs/50 ltrs incl grouting of bolts 10mmx150mm long with cement including making good and matching existing surgace and finish complete all as specified and as directed by Engr-in-Charge.

Material & Labour for repair to inner tank of geyser cap 25/50 ltr complete taking down the geyser opening outer cover and taking out inner tank soldering/ welding/breezing the tank, testing with filling water, reassembling the geyser complete all as specified and as directed by Engr-in-Charge.

Material & Labour for supply and replacement of glasswool for geyser cap 25/50 Ltr complete opening the geyser taking out old U/S glass wool and replace with new glasswool reassembling and fixed on position complete all as specified and as directed by Engr-in-Charge.

Material & Labour for replacement in repairs stop valves cast copper alloy screwed down high pressure with fancy type cromium plated 15mm dia bore both ends screwed. complete all as specified and as directed by Engr-in-Charge.

Supply and replace Heavy duty PVC connection with SS nuts and washer suitable for hot water, complete of size15mm dia x 45cms long complete all as specified and as directed by Engr-in-Charge.

ditto as per item No 119 but 600mm long complete all as specified and as directed by Engr-in-Charge.

Supply and replace heating element ISI marked of suitable type as per existing including rubber ring clamping screws etc complete of 1.5/2.0 KW complete all as specified and as directed by Engr-in-Charge.

Supply and replace heating element suitable for surya geysers round type including rubber ring clamping screws etc complete of 1.5/2.0 KW. complete all as specified and as directed by Engr-in-Charge.

Supply and replace themostatic switch ISI marked for geyser as per existing of range 15-65 degree temparature complete all as specified and as directed by Engr-in-Charge.

Supply and replace syphonic assembly for geyser as per existing size and suitable for surya geysrs 25 ltrs capacity complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of unsevicebale indicating lamps for geysers of Bajaj/Veenus/Ditz/Sphare hot/Sidhson or any other make complete all as specified and directed by engineer-in-Charge.

Supply and replace vacuum release valve on inlet side of geyser complete all as specified and as directed by Engr-in-Charge.

Supply and replace brass chromium plated horizontal/vertical non return valve of size 15mm dia bore ISI marked on inlet side of geyser. complete all as specified and as directed by Engr-in-Charge.

Supply and replace pressure release valve complete all as specified and as directed by Engr-in-Charge.

Supply & Replace 3 Pin Plug top 15 Amp complete all as specified and as directed by Engr-in-Charge.

M/s SUNIL ENTERPRISES (BID ID -3426748)