Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹22.9 LAdmitted-Finance | -7.77% | ₹22.9 L | L1 | Admitted-Finance |
| 2 | L2₹23.2 L+₹26,944.76 (1.18%)Admitted-Finance | -7.00% | ₹23.2 L+₹26,944.76 (1.18%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | MS SONA RAM LICHHMAN RAM L2 | maha jagdamba construction L1 |
|---|---|---|---|---|---|
| 1.01 | Supply and Fixing of Reading cum Computer Table (Cubical Type furniture Table) Size : Top should be 30" W x 22" D x 30" H fixed on wall side with induvidule seating partition type seating using 18 mm Ply exposed surface is finished with high compressed approved 1.00 mm thick Leminet. The understructure shall be having legs made from both side Lemineted 18 mm thick ply MS clad with the wall. Hollow construction of legs facilities wire management as required at site. The modesty & side panel should be both side Leminated 18 mm thick ply. The storage shall be having drawer unit, unit body shall be constructed from both side. Leminated 18 mm thick ply, Drawers should be mounted with telyscopic sliding heavy duty steel channal fronts should be of 18 mm ply lemineted and edges should be lemineted by approved lemineteas per drawing and design, outer front exposed face ply lemineted by approve shade and design Mica & Ply make i.e. merino / green / century / turbo as per IS: 303 relevant code or approved before using, uses outer exposed surface leminet should be 1mm thick and inside of wooden box & Door ply surface lemineted by 0.8 mmm thick Liner Mica, all open wooden / ply surface covered by paint / polish, all hardwair hinges handle fixed after approval, all meterial as per direction of Engineer-in-charge. | 30 | Rmt | 4,900 ₹1,47,000 | 4,000 ₹1,20,000 Lowest |
| 1.02 | Supply and Fixing of Library Wooden Chair with handle for Senior Citizen size: 18 x 18 x 36 as per drawing and design, made of Teak wood grade-1st, Chair made with foam must be made of 40 density of sleep well / Arvind / corfoam / sweet dream for the seat and unhoulstry must be made of 40 density of sleep well / Arvind / corfoam / sweet dream for the seat and uphoulstry must be of superior quality fabric, applicable Hardware and fixtures are good quality of godrej / kitch / ebco / enox make, all wood surface must of finished with melamine poished as per approved shade, all material as per IS relevant code to be use and complete in all respect as per direction of Engineer-in- charge | 36 | EACH | 3,000 ₹1,08,000 Lowest | 4,500 ₹1,62,000 |
| 1.03 | Supply and Fixing of Library Wooden Table at Middle Area size: 72" x 48" x 30" as per drawing and Design, Made of teak wood grade-1st, Table Top in 18 mm ply with 1mm thick Lemineated and edges coverd by Teak wood beading, all wood surface must be of finished with melamine polished as per approved shade, all meterial as per IS relevant code to be use and complete in all respect as per direction of Engineer-in-charge | 1 | EACH | 8,000 ₹8,000 Lowest | 12,000 ₹12,000 |
| 1.04 | Supply and Fixing of wall side Wooden shelve Rack with Sliding Glass size ; 6'H x 4'W x 12" D as per design and Drawing, Made of 18mm BWR grade ISI Marked, outer exposed surface finished with Mica lemineted & Ply make i.e. merino/green / century / Turbo as per IS: 303 relevant code or approved before using, Inside of wooden box and Drawer ply surface lemineted by 0.8 mm thick Liner Mica,sliding glass 5 mm thick and slide in aluminium channal, glass make i.e. modiguar/TATA Asahi/ Santgobin, applicable Hardware and fixtures are good quality of godrej/kitch/ ebco/enox make, all wood surface must be of finished with wooden polished as per approved shade complete in all respect as per Drawing and complete in all
respect as per direction of Engineer-in-charge | 4 | EACH | 20,000 ₹80,000 | 7,000 ₹28,000 Lowest |
| 1.05 | Sofa cum Center Table (three seater sofa + one table 18" x 36")asper Drawing Design ,main structure Made of pine wood, Cushion on sofa made with foam must be made of 40 density of
Sleep well /Arvind / Sweet dream for the seat and uphoulstry must be of superior quality fabric, applicable Hardware and fixtures are good quality of godrej/kitch/ ebco/enox make, all ood surface must be of finished with melamine polished as per approved shade complete in all respect as per direction of Engineer-in -charge | 1 | EACH | 32,000 ₹32,000 | 22,000 ₹22,000 Lowest |
| 1.06 | Reception Counter Table Size 27" x 48" x 30" as per design and Drawing, Made of 18mm BWR grade ISI Marked, outer exposed su face finished with Mica lemineted & Ply make i.e. merino/green / century / Turbo as per IS: 303 re evant code or approved before using, Inside of wooden box and Drawer ply surface lemineted by 0.8 mm thick Liner Mica, applicable Hardware and fixtures are good quality of godrej/kitch/ ebco/enox make, all wood surface must be of finished with wooden polished as per approved shade complete in all respect as per Drawing and complete in all respect as per direction of Engineer-in-charge | 1 | EACH | 23,000 ₹23,000 | 12,000 ₹12,000 Lowest |
| 1.07 | Office Table in Server room Size ; 30" x 60" x 30" With one side drawer and box cabinet under the Table Top, as per design and Drawing, Made of 18mm BWR grade ISI Marked, outer exposed surface finished with Mica lemineted & Ply make i.e. merino/green / century / Turbo as per IS: 303 relevant code or approved before using, Inside of wooden box and Drawer ply surface lemineted by0.8 mm thick Liner Mica, applicable Hardware and fixtures aregood quality of godrej/kitch/ ebco/enox make, all wood surface must be of finished with wooden polished as per approved shade complete in all respect as per Drawing and complete in all respect as per direction of
Engineer-in-charge | 1 | EACH | 20,000 ₹20,000 | 12,000 ₹12,000 Lowest |
| 1.08 | Printer brand HP/CANON/BROTHER ETC Similar companies
black & white printer A4 Black & White Lasor multi functional printer perfect home and office print , copy,scan, print speed upto 20 PPM
USB mobile printing,HP smart app, Apple Air print , Mopria, wifi warrenty 3 years | 1 | EACH | 22,000 ₹22,000 | 18,900 ₹18,900 Lowest |
| 1.09 | 4G -5G Cable Line
Supply & Fixing 4G -5G Cable Line / Connecting Line According Airtel / Jio /
BSNL etc. Complete work including Labour Charges & Acessories. All
work & specification should be completed as per Direction of Engineer incharge | 1 | EACH | 15,000 ₹15,000 Lowest | 15,000 ₹15,000 Lowest |
| 1.10 | Desktop Computer Set-Up-( Intel i3 pre installed Genuine Windows 11 profesional ) including necessary cables etc
(i) Processor - Acer/DELL/LENOVA/HP/IOS AND SIMILAR 11th Generation (3 Year Warranty),
(ii) LED Monitor - 22-inch, (iii) RAM - 16GB, (iv) 1 TB storage
(v) Key Board, Mouse,Headphones Windows - 11, MS-Office, etc. | 5 | EACH | 45,000 ₹2,25,000 Lowest | 60,800 ₹3,04,000 |
Tender Value
₹24.3 L
EMD Value
₹48,600
Closing Date
5 Aug 2026, 6:00 pmClosed
Commissioner
Nagar Parishad Didwana
Dr. Br. Ambedkar E Library In Salasar road Ambedkar Bhawan Didwana.
2026_DLB_580713_1
Npd/Vikas/2026-27/3098/01
Open Tender
Machineries/ Mechanical Engg Items
Percentage
Nagar Parishad Didwana
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Commissioner
₹48,600
Yes
7 Aug 2026
1 Aug 2026
6 Aug 2026
1 Aug 2026
5 Aug 2026
1 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 coarse sand). | 300 | SQM | 104.5 | ₹31,350 |
| 1.02 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | 90 | SQM | 204.5 | ₹18,405 |
| 1.03 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade. | 420 | SQM | 104.5 | ₹43,890 |
| 1.04 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron | 150 | KG | 472.5 | ₹70,875 |
| 1.05 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50
micron) | 40 | KG | 508 | ₹20,320 |
| 1.06 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.50 mm thickness | 8.64 | SQM | 1,278 | ₹11,041.92 |
| 1.07 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formaldehyde resin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure 'A' : 25 mm thick Decorative teak veneer both side | 10.56 | SQM | 2,645 | ₹27,931.2 |
| 1.08 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | 4 | EACH | 559 | ₹2,236 |
| 1.09 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. | 4 | EACH | 644 | ₹2,576 |
| 1.1 | Providing & Fixing in position, Acoustical Ceiling with following Panels on approved heavy duty G.I. frame ceiling channels at 450 c to c, & intermediate channels not more than 1200 c to c, along with ply wood forms suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 mm thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing-items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour, finishing etc complete Gypsum Plain panels | 149.85 | SQM | 2,645 | ₹3,96,353.25 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.20 MB
BOQ_1031863.xls
BOQ • 0.40 MB
ELibraryNitTC.pdf
Tender Documents • 4.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .