SPL REPAIR TO BLDG NO HAV-24 QTR 1 4 OF 517 ASC BN AND PROVN OF KOTA STONE FLOORING AND 4 FT WALL TILLING IN BLDG NO T 83 OF 383 ASC AT NEW MIL STN UNDER GE GANGTOK

Amount

Dismantling old PGI/CGI sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete all as specified and as directed.

Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and removal from site complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n exc 15 cm thicness (un-reinforced) below or above ground level complete all as specified and directed .

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of precast concrete block walling/brick wall built in cement mortar complete all as specified and directed.

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof covering complete all as specified and directed.

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed.

S&Fin repairs for Harrison rail, mild steel,chromium plated , 25 mm dia with fixing brackets, stops, rollers, nob, holder etc in curtain rails complete all specified and directed.

S&F for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

M&L for plain, framed, panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

S&F second class hardwood, glazed and skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats omplete all as specified and directed.

S&F for factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2004) complete all as specified and as directed.

S&F for 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, ild steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail on either side & as gap insert for toprail and bottom rail, panelling of both side prelam PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with uitable PVC sheet beading and jointed together with solvent cement as per specification and drawing given on MES Schedule Part-II (2010) complete all as specified and as directed.

S&F for Mild steel butt hinges 100mm long, medium weight, cold rolled complete all as specified and directed.

S&F for Mild steel butt hinges 75mm long, medium weight, cold rolled complete all as specified and directed.

S&F for 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and directed.

S&F for extruded aluminium alloy handles 150mm long, fabricated type, anodised complete all as specified and as directed.

S&F for extruded aluminium alloy handles 100mm long, fabricated type, anodised complete all as specified and as directed.

S&F for Aluminium anodised barrel tower bolts, 150 mm long, of extruded section complete all as specified and as directed.

S&F for Aluminium anodised barrel tower bolts, 100 mm long, of extruded section complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint (1st graded quality) over one coat of pink primer complete all as specified and directed.

S&F powder coated grid frame work for false ceiling comprising of the following sections for making partitions of 600 x 600m size fixed to walls with rawl plugs & screws and hanged to roof with and including1mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 28mm x 23mm x 0.30mm thick, cross tee shall be 24mm x 23mmx0.30mm thick and wall angle shall be 20mm x 20mm x 0.30mm thick complete all as specified and as directed.

S&F for 4mm thick Non asbestos fibre cement building board (E-board) of approved texture for insulation and acoustic purpose of size 595x595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface and applying one coats of oil emulsion distemper over a coat of primer including preparation of surfaces complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F framed work such as grills, gratings etc, with ends of bars, shoulded and/or riveted or forged in spikes, framed guard bars, walk ways, railings, frame work of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and as directed.

M&L for two coats of synthetic enamel painting (1st graded quality) to new steel surface over a coat of red oxide primer including preparation of surfaces area exc 10cm width & girth complete all as specified and as directed.

M&L for Light shade non skid tiles 8-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour incl 20mm thick screed bed in cement mortar (1:6) for laying floor/roof finishes complete all as specified and as directed.

All as per item No 35 here-in-above but in skirting with 8-10 mm thick backing coat in CM ( 1:4) complete all as specified and as directed.

M&L for Non - skid colured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for glazed coloured ceramic tiles (350x250x7mm thick/450x300x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match the colour incl 10 mm thick screed bed/rendering of CM (1:4) as in wall complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed.

M&L for machine cut pre-polished kota stone flooring slab flooring 20-25mm thick over cement screed 20mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed

M&L for pre cast cement concrete block masonry (1:3:6) type C1 (20 mm graded crushed stone aggregate) with solid blocks 10 cm thick in width and settting in cement mortar (1:6) complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with Solid blocks,(1:3:6) type C1 (20mm graded crushed stone aggregate) exc 10cm in width and setting in mortar (1:6) complete all as specified and directed.

S&F 6 Pin Metal Bathroom cloth hanger for door wall robe hooks rail for hanging keys, clothes and towel etc (40 cm long) complete all as specified and as directed.

S&F in repairs 25mm thick factory made flush shutter solid core construction with block board core and plywood face panels ,commercial type on both sides and fixed to chowkat SSR-2020 Part-I clause 8.20(a) complete all as specified and as directed.

S&F for Mild steel butt hinges 50mm long, medium weight, cold rolled complete all as specified and directed.

Taking up or down steel water tubings Bore 15mm and fittings etc complete and making good disturbed surfaces of walls/ceilings etc complete all as specified and as directed.

Taking up or down steel water tubings Bore 20mm and fittings etc complete and making good disturbed surfaces of walls/ceilings etc complete all as specified and as directed.

S&F for steel tubing medium grade 20 mm bore, galvanised with all fitting fixed complete to walls and ceiling or floor complete all as specified and as directed.

All as per item No 47 here in abvove but fixing only complete all as specified and as directed.

S&F of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

M&L for Cutting chases, pinning in, making good to facing where required and pointing in CM (1:3) for concealed water tubing conduit wiring etc and making good, cutting n.exc 10 cm girth as in stone or concrete block walls complete all as specified and directed.

S&F for Rolled sections Fe 410-w (grade E-250) quality-A as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1.00mm thick for kitchen with plugs, washers and waste pipe, wasters, including cantilever CI brackets connecting union 40 mm CP waste fitting and PVC waste pipe with CP PTMT fly nuts of required length pipes etc (overall size 915mm x 460mm with bowl size 410mmx330mmx160mm) complete all as specified and directed.

S&F in repair Water Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete of complete all as specified and directed

S&F in repairs for wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets,Indus Basin (white) or equivalent including 32 mm dia waste pipe with or without padestal complete all as specified and as directed.

S&F of PVC connections 15 mm size with PTMT nuts/brass nuts of length 600 mm complete all as specified and directed.

S&F in repairs of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, flush pipe etc complete & connecting to WC complete all as specified and directed.

S&F in repairs of G I steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed.

M&L for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite granite stone including cutting and polishing etc including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for rounding to edges of granite slabs one edge such as in steps, cooking platforms and other similar situations complete all as specified and directed.

S&F in repair 15mm bore chromium plated single lever basin/sink/wall mixer with 305mm(12'') extended body and 600mm braided connection pipe (without pop-up) complete all as specified and directed.

S&F in repair 15mm bore long body bib tap cast copper alloy chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and as directed.

S&F in repair 15 mm bore angular stop cocks chromium plated with flange complete all as specified and directed.

S&F in repairs for 600 x 450mm looking mirror with aluminium channel frame, mounted on 6mm thick commercial plywood frame and fixed to wooden plug with chromium plated brass screws & cup washers incl glass self assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railling 60 cm long complete all as specified and directed.

M&L for use and waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar works n. exceeding 200mm thick for flat fair finished surfaces of conceter complete all as specified and as directed.

M&L for use and waste of form work to edges of concrete flats, treads, breaks in flooors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 10 cm but n exc 20cm wide complete all as specified and as directed.

M &L for RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in Slabs supported on walls including necessary form work complete all as specified & as directed. NOTE : Re-inforcement shall be measured and paid separately.

M&L for TMT bars , 10 mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F in repairs stainless steel plate rack of 1mm thick and size 910mm x 1000mm x 250mm three tier complete all as specified and directed.

S&F in repairs tubular towel rail 20mm dia D type, Brass Chromium Plated 60 cm long between flanges complete all as specified and directed.

Applying two coats of DR Fixit Fast Flex 113 of DR Fixit for sunken portion treatment all as per manufacturer instruction and complete all as specified and as directed.

PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in filling & mass concrete complete all as specified and directed.

M&L 15 mm thick rendering plaster on fair faces of conc faces in CM (1:6) complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:4) in two layers of 10mm and 5mm (outer layer CM should be added with WPC) in finishing layer on brick or concrete surfaces finished even & smooth (WPC for finishing layer will be paid seperately as supply only) complete all as specified and as directed.

M&L for 5mm thick in CM (1:3) in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for applying two coats of OBD over a coat of primer applied over providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth including complete removal of existing treatment and preperation of old/new surfaces preparing the surfaces even and smooth complete all as specified and as directed.

M&L for applying two coats of exterior acrylic emulsion painting (weather coat) over a coat of alkali resistant primer including complete removal of existing treatment and preperation of old/new surfaces complete all as specified and as directed.

M&L for applying two coats of white washing including preparation of new/old decorated surface on walls complete all as specified and directed.

M&L applying one coat of white washing including preparation of new/old decorated surface of ceiling complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/Path/hardstanding finished the concrete surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends complete all as specified and directed.

S&F in repairs for PVC(SWR) 75mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or as in weephole with necessary clamps, bolt, bends, Tee etc complete all as specified and directed.

S&F in repairs PVC(SWR) 75mm access door bend complete all as specified and directed.

S&F for PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 75 mm complete all as specified and directed.

M&L in repairs for PVC floor/Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 100mm) as in repair complete all as specified and as directed.

M&L for PCC (1:3:6), type C-1 (using 20mm graded crushed stone aggregate) as in coping complete all as specified and as directed.

M&L Lacquer coated coloured chequered cement concrete tiles 300 x 300mm x 25mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster (1:4) complete all as specified and as directed.

M&L for pre-cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in manholes covers etc including necessary form work and set in CM (1:4) complete all as specified and directed. NOTE : Re-inforcement shall be measured and paid separately.

S&F floor door stopper of aluminium alloy body and tongue ,anodised,with hard drawn steel spring fixed in floor having overall length 150 mm complete all as specified and directed.

S&Fsteel water tubing 50 mm dia 'medium grade', galvanised, with all fitting and fixed complete to as in spout pipe in sunken portion,fixed in repairs complete all as specified and directed.

S&F in repairs for PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints,fixed to wall/laid under trenches complete all as specified and directed.

S&F in repairs for 110 mm bore PVC (SWR) vent cowl fixed in position complete all as specified and directed.

S&F in repairs for PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 110 mm complete all as specified and directed.

S&F in repairs PVC(SWR) 100mm access door bend complete all as specified and directed.

E/M Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces.

M&L point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) one light point controlled by one, one way switch with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel duly painted concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, all as specified and as directed.

b) One 3 pin 5 amps switch socket outlet point on independent board.

c) One 3 pin socket outlet 5 amps on the same board with other switches

d) One light point controlledby two way switches

e) One bell/buzzer point controlled by one push button on the same board with other switches or independent

All as per item Sl. No. 98 here in before but wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for Metal clad socket complete all as specified and as directed.

Supply and fix switch piano flush type single pole , one way 6 Amp 230 Volts,50Hz, ISI marked complete all as specified and as directed.

Supply and fix Socket outlet 2 in 1, 3 pin ,6A 230 Volts,50Hz, ISI marked complete all as specified and as directed.

Supply and fix bell push flush type 6 A, 230 Volts,50Hz, ISI marked complete all as specified and as directed.

Supply and fix Switch piano, flush type single pole, two way 15 Amp 230 Volts,50Hz, ISI marked complete all as specified and as directed.

Supply and fix switch piano flush type single pole , one way 16 Amp 230 Volts,50Hz, ISI marked complete all as specified and as directed.

Supply and fix Socket, outlet 2 in 1 , 3 pin , 6 Amp and 16 amp flush type 230 V 50Hz,ISI marked complete all as specified and as directed.

Supply & fixing LED lights fitting 1x18 watt 220 V, AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply & fixing LED lamp 1x9 watt/1x10 watt 220 V, AC decorative wall light holder with LED bulb suitable for 9 W LED lamp B22 base connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply & fixing LED lights fitting 1x9 /1x10 W 220 V, AC bulk head luminaries including , holder including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply & fixing LED Mirror lights light fitting with high out put diffuser 2 feet , 10 watt 220 v AC decorative type with driver holder and LED lamp including connecting up with driver three core flexible copper conductor cases suitable size complete all as specified and as directed.

Supply and fixing LED building security light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65 /66 protection and impact resistance of IK07 complete GI bracket 1.5m long made out of GI dia suitable for fixing street lights bend to suitable radius incl 2 sets of clamps nuts bolts washers incl painting with aluminium paint etc complete all as specified and as directed.

S&F ceiling rose, 3 phase ,PVC polycarbonate ,insulated body (ISI Marked) complete all as specified and directed.

Supply & fix lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as specified and as directed.

Supply & fixing Buzzer Ding Dong AC 230 volts single pole with suitable fixing arrangement complete with all as accessories complete all as specified and as directed.

Taking down submain wiring of aluminium /copper with PVC/Steel conduit complete all as specified and as directed.

M&L for concealed sub-main wiring along with earth wire of size e 2x06 sqmm with 1x6 sqmm earth wire ,ISI marked FRLS ,PVC insulated ,multi stranded , copper conductor ,single core cable drawn through and incl PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduit & sinking for sunken boxes & making good to walls, floors etc complete all as specified and directed Note : 3 runs of 6 sqmm and 1 run of conduit will be measured as one unit i.e RM

S&F for MCB DB SPN 8 ways Double Door 240 Volt with 200 Amp rated bus bar ,IP-42,IK-09, metal door, earth bar, neutral links complete incl blanking plates as required & fixed flush to wall / other surface complete all as specified and as directed.

S&F MCB single pole & neutral SPN 32 Amps , 240 Volts , 10 KA rupturing capacity , C curve complete all as specified and as directed.

S&F MCB single pole 6 to 32 Amps , 240 Volts , 10 KA rupturing capacity , C curve complete all as specified and as directed.

S&F for MCB DB TPN 4 ways Double Door 240 Volt with rated bus bar ,IP-42,IK-09, metal door, earth bar, neutral links complete incl blanking plates as required & fixed flush to wall / other surface complete all as specified and as directed.

S&F MCB TPN 40 to 100 Amps , 415 Volts , 10 KA rupturing capacity , C curve complete all as specified and as directed.

S&F MCB single pole & neutral SPN 32 to 63 Amps , 240 Volts , 10 KA rupturing capacity , C curve complete all as specified and as directed.

S&F of Geysers storage type steel body with copper inner tank and heating element upto 2KW capcity 25 Ltr, BEE 5 star rated complete with all accessories such as saftey valve , therostate, NRV, connection piece and complete testing all as specified & as directed.

S&F single pole & neutral enclosure with a two pin & earth plug & socket complete with one single pole MCB C curve of 20 A rating complete all as specified and directed

S&F 300 mm exhaust fan, steel body AC single phase 230V sweep with blades and frame and louvers complete with all accessories and complete specified and as directed.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, Voltage 230V, 50Hz RPM 1200, copper winding of sweep 250mm complete with all accessories as specified and as directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected with galvanised iron/steel earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to DBs including necessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and as directed by Engineer-in-Charge including testing on completion.

S&F rotational moulded polythylene water storage tank, 500 litres capacity, anti bacterial, UV and heat resistant 3 layer (ISI marked) multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including supply and fixing of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 210 gms, with threaded cap/Lid including connection including dismantling of old unserviceable water tank complete all as specified and as directed.

M&L for 25mm dia steel tubing medium grade galvanised with all fitting fixed complete to walls and ceiling or floor complete all as specified and as directed

Supply & fix 25 mm bore Gun metal valves, ISI marked with iron wheel head screwed both ends for GI pipe complete all as specified and as directed

M&L for 25 mm thick PCC (1:2:4) type B2 ( 20mm graded crushed stone aggregate) , finished concrete surfaces even and rough to receive floor finishes complete all as specified and as directed.

DHARMINDER SINGH (BID ID -3381479)

M/S ANIL KUMAR THAKUR (BID ID -3380386)

S K ENTERPRISES (BID ID -3376465)

MAHENDRA KHAWAS (BID ID -3381736)

SANJAY MITTAL (BID ID -3381098)

RAAJ BANGAR (BID ID -3376408)

KAMLESH ENTERPRISE (BID ID -3377779)

KARMA TSETEN BHUTIA (BID ID -3379624)

SANJAY KAUSHIK (BID ID -3377114)