Day to day maintenance of internal electrification in MD Accn of Salaria Officers Enclave under GE (West), Delhi Cantt-10

Taking down carefully point wiring (light/fan/socket/power/call bell) complete from existing concealed conduits and making good the disturbed surfaces of wall/floors/ceiling etc) and all modular flush box ,frame plate and switch socket fitting fixtures deposited to MES store Yard complete all as specfied & directed.

M&L for point wiring with 3x1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable (phase, neutral and earth wire) in existing concealed conduit, earth wire connected to common earth dolly. Existing pressed steel sheet Metal sunken box and modular frame plate ,switches ,Sockets are fully intact at site and need not to be replaced under this items, this item includes only replacements of the light point/5 Amp independent board point/power point circuits wire (phase,neutral,earth) at site all as directed by Engr-in-Charge. Work to be completed carefully without damaging any existing items. Note: (a) Site will be available in peace wise/completely to contractor as per availability. (b) Any damage/breaking of wall surfaces to be make good by the contractor without any extra cost and make the surface match with the existing colour and texture of walls.

(a) One light/fan/bell point controlled by one way switch 5 amps.

(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

(d) One Two Way switch point controlled by 2-two way switch 5 amps.

All as per item No. 2 here in before but with 2x2.5 Sqmm and 1x 2.5 sqmm cable for earth connection for one 2 pin socket outlet 15 amps independent board in existing conduit complete all as specified and directed.

All as per item No.2 here in before but with 2x4 Sqmm and 1x 4 sqmm cable for earth connection for AC/Geyser points in existing conduit complete all as specified and directed.

Supply, laying and drawing submain wiring in existing concealed PVC rigid conduit in walls 02 runs of IC x 10.00 sqmm (Main Cable and neutral) and one run of IC x 10.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including making good surface of distubed area complete all as specified and directed.

Supply and fix in repair modular switch 5A ,indo Asian as per sample complete all as specified and directed

Supply and fix in repair modular switch 15A indo Asian as per sample complete all as specified and directed.

Supply and fix in repair modular socket 5A, 5 pin, indo Asian as per sample complete all as specified and directed.

Supply and fix in repair modular fan regulator 1 module indo Asian as per sample complete all as specified and directed.

Supply and fix in repair modular socket 15A, 2 in 1 indo Asian as per sample complete all as specified and directed.

Supply and fix in repair modular bell push 5A indo Asian as per sample complete all as specified and directed.

Supply and fix in repair modular two way switch 5A indo Asian as per sample complete all as specified and directed.

Supply and fix in repair modular cover plate 3 module as per sample complete all as specified and directed.

Supply and fix in repair modular cover plate 4 module as per sample complete all as specified and directed.

Supply and fix in repair modular cover plate 6/8 module as per sample complete all as specified and directed.

Supply and fix in repair call bell electric 240 volts, AC supply, Ding Dong type complete all as specified and as directed.

Supply and fix in repair ceiling rose3 phsae pvc/polycarbonate isolated body complete all as specified and directed.

Supply and fix in repair PVC flexible two core copper 1.5 sqmm size complete all as specified and directed.

Supply and fix in repair Single core copper conductor 1.5 sqmm size complete all as specified and directed.

Supply and fix in repair Single core copper conductor 2.5 sqmm size complete all as specified and directed.

Supply and fix in repair Single core copper conductor 4.0 sqmm size complete all as specified and directed.

Identifying and rectifying the Defects pertains to ceiling fans/exhaust fans/Air ventilation Fan and connects electric circuit, tightening of loose wirring/conduits /fan capacitors and connection carrying out minor repairs incl blade alignments , screwing/ tightening the nuts/bolts/washers etc incl taking down & refixing properly in the same position after repairs,complete all as specified and directed.

Dismantling of complete defective Ceiling fan of 1200 mm sweep i.e. down rod with its Canopies, Shackle, Blade, Condenser housing with its rubber bushes, split pins, unscrewing the body parts of Ceiling fan, taking out starter, rotor winding,ball bearing, gun metal bush etc. complete to carry out the following repairs :-

Notes :- (a) Removing of burnt out fan winding and rewinding of starter winding with suitable size of Copper enamelled wire, ( weight of copper coil shall be same as per dismantled Fan) varnishing heating and testing as per manufactures designed & specifications and as directed by Enge-in-charge.

(b) Re-assembling complete Ceiling fan by fixing only serviceable of old/new spare parts (i.e.) rubber bush of shackle and condenser housing, condenser, gun metal bushes,blades, ball bearing, twin twisted Copper cable, down rod assembly with its shackle condenser housing and Canopies & split pins complete all as specified and design to give designed air delivery including greasing, oiling, cleaning outer body & surfaces etc all as directed.

Ditto- all as per Item No. 23 here-in-before but Air ventilation PVC body/ metal body exhaust fan of size 200/230/300 mm sweep.

Ditto- all as per Item No. 23 here-in-before but only overhauling of celing fan 1200mm/1400mm by greasing and oiling,replacement of unserviceable/defective components, except rewinding of starter winding complete all as directed.

Note Sl.No. 23 : (a) Spare parts found unserviceable/defective will be measured and paid separately under relevant item as Supply and fix in repair .

Supply in Repairs/Replacements of following spare of Ceiling fan 1200mm /1400mm sweep of different make :-

(a) Fan Condenser of capacity 2.5/3.5 mfd, 220 Volts, AC 50 Hz, plastic-casing, two terminal-copper wire, complete all as specified and directed.

(b) Rubber bush for shackle with bolt, nut and lock pin suitable for Ceiling fan 1200mm/1400mm sweep.

(c) Split Pin

(d) Ball bearing of size 6201/6202 as per sample complete all as specified and directed.

(e) Gun metal bush as per sample.

(f) Fan canopy pvc body, white in colour, suitable for existing fan, as per sample and directed.

(g) ceiling fan blade 1200 mm sweep made up of aluminium body having provision of free size monting nuts/screw all as per requirement at site complete all as specified and directed.

M & L for preparation of old painted/rusted surfaces of 1200/1400 mm sweep ceiling fan and re-fixing the same after painting of the same with white colour synthetic enamel paint by spraying including filling cavities with filler & one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, complete all as specified and directed by Engr-in-Charge. NOTE:-All T&P and labour team as required will be provided by the contractor and cost deemed to be included in the quoted rate.

M&L in repair louvr shutter of exhaust fan suitable for 300 mm size at the height from 3mtr to 6 mtr height making good surface of distubed area complete all as specified & directed. Note: Contractor shall arrange suitable T&P including necessary form work, scoffolding and safety measures to fix properly the exhaust fan shutter complete all as specified and directed.

M & L for Overhauling/Dismantling of defective/rusted Geyser of 25 Ltr capacity, removing inlet/outlet connections, taking out U/S parts by unscrewing bolts and nuts etc. Checking defects and re-assembling the Geyser after refixing serviceable/new parts & cleaning, dicling and refixing only serviceable items and re-installing the Geyser in suitable place/position and connecting inlet-outlet connections & testing complete, all as specified and directed by Engr-in-charge. Note:(a) Items required for replacement of U/S parts will be measured and paid separately under relevant item of sch "A" ).

Supply in Repairs/Replacements of following spare parts of geyser storage type of different make for capacity 25 ltrs (Make of spare parts shall be of existing make or as per samples as required)

(a) Apparatus assembly duly prewired without heating element and thermostat/thermal cutout.

(b) Indication lamp (Green/Red) as per sample.

(c) Thermostat as per sample.

(d) Heating element 2.0 KW, trianglular/circular or as per sample given at site complete all as specified and directed.

(e ) cover outer for Geysers (confirming to IS) suitable for any make/capacity/type of Geysers installed at site duly painted with two quotes with enamel (Deco) paint of colour & shade complete all as specified and directed.

(f) stainless Steel inner tank of 25 Ltrs capacity complete all as specified and directed as .

(g) geyser bottom and top cover for Geysers (confirming to IS) suitable for any make/capacity/type of Geysers installed at site duly painted with two quotes with enamel (Deco) paint of colour & shade complete all as specified and directed.

(h) geyser SS braided pipe of 12 mm (internal dia) suitable for hot/cold water, 450 mm long with brass nuts and rubber washers complete all as specified and directed.

Supply and fix in repair metal plug top 20 Amps 3 pin 230- volts complete all as specified.

Supply and fix in repair metal plug socket 20 Amps 3 pin 230- volts complete all as specified.

Supply and fix in repair exhaust fan motor up to 300 mm copper windings as per sample complete all as specified and directed.

Supply and fix in repair PVC Fresh air fan motor 250 mm copper windings as per sample complete all as specified and directed.

M&L in repair lower shutter made out of GI sheet suitable for exhaust fan 300 mm sweep size at the height from 3mtr to 6 mtr height making good surface of distubed area dully fixed with gitti,pech.screw with all accessories complete all as specified & directed. Note: Contractor shall arrange suitable T&P including necessary form work, scoffolding and safety measures to make it functional complete all as specified and directed.

Supply and fixing ceiling fans against BLDC conversion in repair complete with blades, down rods, with remote and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) remote operated complete all as specified and directed.

Supply and fixing ceiling fans against BLDC conversion in repair complete with blades, down rods, with remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) remote operated complete all as specified and directed.

S &F exhaust fan 300 mm in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor from ceiling rose to fan, length as per requirement at site.

Supply and fixing in replacement Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete all as specified and as directed.

S &F Wall fan in replacement 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site.

Supply and fix in repair MCB SPN 63 Amps, 10KA, 240V, 'C' series complete all as specified and as directed.

Supply and fix in repair MCB SP 6-32 Amps,10KA,'C' series complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and directed.

Supply and fix in repair MCCB 100 Amps, 3 Pole 415 volts 10 KA 50 HZ complete all as specified and directed.

Taking down carefully sub main wiring three single run 6/10 Sqmm of any make and type complete all as directed.

Supply and fix in repair LED batten luminaire surface mounted 2 feet system wattage of 10 watts and system lumen ≥100 output ,CRI > 80, power factor >= 0.95, THD < 10%, color temperature 3000K- 6500 K , IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in repair LED batten luminaire surface mounted 4 feet system wattage of 20 watts and system lumen≥100 output ,CRI > 80, power factor > =0.95, THD < 10%, color temperature 3000K- 6500 K , IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in repair 10 watts bulkhead fitting with powder coated die cast with glass/ non yellowing polycarbonate cover

, IP65 Protection, System level efficacy of the Luminary is ≥100 lm/W , Power Factor >=0.90, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature 3000K-6500K, including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in repair decorative, wall mounting, champagne gold finish fixtures with plastic body with acrylic cover suitable for 9 Watt led lamp B22 base complete all as specified & directed.

Supply and fix in repair 35/40 watts High efficient LED Building Security light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is >100lm/W .The color temperature is around 6500 K .The luminaire is IP:66 protected It has an electronic driver complaint to IEC safety standards with a power factor>=.0.9, voltage variation range 150-270V.Complete as specified and directed.

S&F GI Pipe bracket bent to shape drilled welded made out of light grade GI pipe 25mm dia 1.5 mtr long and fixing on the wall where as directed by the Engr-in-Charge for fixing of building security light fitting including clamps, nuts, bolts and washers complete all as specified by the Engr-in-Charge .

Supply and fix in repairLED LAMP 9 Watts pin type including taking any type of lamp allspecfied and directed .

Supply and fix sheet metal enclosure MCB distributioon board single pole and neutral 2 way 240 volts.

M&L for Providing PCC 1:2:4 type B-1 20 mm graded aggregate for GI tubing post for pathway light pole complete all as specified and directed.

Supply and fix in repair MCB SPN 16 Amp "C " curve complete all as specified and directed

Supply and fix in replacements Aluminium extruded epoxy grey powder coated garden light aesthetic design for most effective thermal management ,injection moulded opal poly carbonate diffuser provide uniform glare E37 free garden light with inbuilt LED 12 watts and driver, IP 66, LM 79, LED make Osram/Seoul/, CRI≥75, , Luminaire Efficacy≥ 100lm/watt, rated voltage 240V,50 Hz, Light wattage 12 watts THD @ 240V ≤ 10 % , BIS Approved, Aluminium Extruded pole length 800mm dully fixed in PCC and making connection complete all as specified and directed. MAKE- Prima Nx model No PGBL-12/ Equivalent K-light/BAJAJ/Philips

Supply and lay cable PCV insulated screened PVC bedded, multistranded copper conductor wire of size 1.5 sqmm 3 core 1100 volts , With dully fixed in Rigid PVC Conduit Pipe on wall/ ground complete all as specified and directed.

Supplying, laying, jointing, testing and commissioning LT, XLPE insulated armoured, heavy duty aluminium conductor electric cable 1100 Volts grade, cross sectional area 50 Sqmm, 3.5 core including taking out old existing cable in trench/wall/pipes/surface as required and making cannection in LT Panels/Feeder etc complete all as specified and directed.

M&L for excavation in trenches in Hard and dende soil n.exc 1.5 Mtr wide and n.exc 1.5 meter in depth for laying of cables/pole etc setting out trimming the site forming bottom surface to required level complete all as specified and directed by Engr-in-Charge.

M&L for returning filling in-trenches including spreading leveling watering and well ramming in layers with soft/loose/dense soil n.exc 25 cm thick in each layer of soil complete all as specified and directed by Engr-in-Charge.

M&L for removing/excavated soil to a distance n.exc 50 Mtr and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-Charge.

M & L for fixing old serviceable un-reinforced precast concrete cable covers for cable protection of class LV type 1 flat of size 250 x150 x 40 mm.complete all as specified and as directed by Engr-in-Charge

Supply and laying un-reinforced precast concrete cable covers for cable protection of class LV type 1 flat of size 250 x150 x 40 mm.complete all as specified and as directed by Engr-in-Charge