SPL REPAIR CUM REPLACEMENT OF CEILING FANS AND EXHAUST FANS AGAINST BER ITEMS COMMA SPL REPAIR TO INTERNAL ELECTRIFICATION OF BLDG NO P 40 AND 41 OF CCPU COMMA PROVN OF LED SECURITY LIGHT AND FLOOD LIGHT AT BLDG NO P 164 OF CCSR AND PROVN OF CABIN FA

Amount

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

Taking down carefully main switches, DB's, MCB DB's of any way or rating and making good the disturbed surfaces of walls complete all as specified and directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item No. 03 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item No. 03 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item No. 03 above but for One bell/ buzzer point on an independent board controlled by one bell push

All as per item No. 04 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F bell push, flush type, single pole, one way 5/6 Amp, 230 volt flush type complete all as specified and directed.

S&F in repair call bell, ding dong type, AC single pole, 230 volt complete all as specified and directed.

S&F sheet metal enclosure for VTPN DB double door type, 4 way, suitable for 4 pole MCCB, 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCCB/ MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in repair MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F in repair MCB, single pole & neutral 40 to 63 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 40 to 63 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F in repair MCCB, 4 pole, 100 Amp, 415 volts, 16 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F sheet metal enclosures, single pole with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S&F in repair sheet metal enclosures, single pole with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S&F in repair ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

Taking down old copper/ aluminium sub main wiring or service connection complete all as specified and directed

S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 4sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6sqmm nominal cross sectional area and one run of 6sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 2.5sqmm nominal cross sectional area and one run of 2.5sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in repair wall mounted 18/20 W LED integrated tube light fitting of size 1200mm long batten with aluminium housing and decorative end cap and one no 18/20 W LED 6000 K, 230V, with integrated electronic driver complete with all required fittings and fixtures arrangement including and provn of connection from ceiling rose to luminaries with suitable size copper wire complete all as specified and directed. Make: Havells cat no. LHEXBXPNIN1W020 or Surya cat no. SLEBT 20 IL or C&S cat no. LTTB4F20WLED/WI.

S&F in repair LED bulk head light fitting, made of cast aluminium body with heat resistance pressure, die cast housing, IP-65 protection cover and one no. 7 W LED, 6000K, including and provn of connection from ceiling rose to luminaries with suitable size copper wire complete all as specified and directed. Make: Philips (VISTAGLOW) cat no. WT140W LED7S CW PSU S1 PC or C&S Cirius series cat no. LTB7W LED or Havells cat no. LHEOAOP7UZ6W010.

S&F wall mounted, 9/10 W LED mirror light fittings of size 600mm long with integrated Batten and LED 9/10 W, 6000 K, 230V with polycarbonate housing & integrated electronic driver including and provn of connection from ceiling rose to luminaries with suitable size copper wire complete all as specified and directed. Make: Havells cat no. Lumiline plus BS 10WLED865SPCSS or C&S cat no. LTDC01210WLED/WD or Surya Visco cat no. SLE BT 10.

S&F in repair wall mounted, 9/10 W LED mirror light fittings of size 600mm long with integrated Batten and LED 9/10 W, 6000 K, 230V with polycarbonate housing & integrated electronic driver including and provn of connection from ceiling rose to luminaries with suitable size copper wire complete all as specified and directed. Make: Havells cat no. Lumiline plus BS 10WLED865SPCSS or C&S cat no. LTDC01210WLED/WD or Surya Visco cat no. SLE BT 10.

S&F in repair security light fitting of 25 W LED 6000 K, with high power LED source (more than 100 lumens per watt), PDC housing, IP65 with 4KV inbuilt surge protection driver and one no. 25W LED tube, with all accessories, prewired with and fixed to bldg/pole including GI bracket 1.20m long bent to shape, made out of 40mm dia GI light grade pipe with nuts, bolts and washers and provn of connection from ceiling rose to luminaries with suitable size copper wire complete all as specified and directed. Make: Havells cat no. LHEWEBP7PL6S025 or Surya Lexon cat no. SLE UL 25W IP 66(LXN) or C&S cat no. LTESS25WLED/L5.

S&F 30W LED flood light fitting, warm/day cool as required, IP- 65 protection with high power COB LED complete with including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts and bolt complete all as specified and directed. Make: Havells Jeta quanto plus cat No. JETAQUANTOPLUSFLP30WLED757SYMLENS or Surya Cosmo cat no. SLE FL 30 W COSMO or C&S Orion 1.0 cat no. LTEFI 30W HP LED.

S&F super bright LED (2X2) light fitting, 36 W, 6000 K recess mounting with high efficent LED source with 02 nos LED Light and all accessories, prewired complete all as specified and directed. Make: Surya Celesta cat no. SLE DS 36 22R or C&S cygnus-c series cat no. LTCRP36WLED2x2 or Philips cat no. RC380B LED30S-6500 G4 L60W60 PSU OD OC.

S&F integrated LED Post top lantern with high power 25/30 W LED as light source, energy saving, envioronmental friendly, long life asethetically designed with symmetrical light distribution, spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection complete all as specified and as directed. Make: C&S cetus cat no. LTGLC30WHPLED/W or Havells cat no. Ruby Clear RUBYPT25WLED757PSYMTOPS or Surya cat no. E-TOPP

S&F in repair integrated LED Post top lantern with high power 25/30 W LED as light source, energy saving, envioronmental friendly, long life asethetically designed with symmetrical light distribution, spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection complete all as specified and as directed. Make: C&S cetus cat no. LTGLC30WHPLED/W or Havells cat no. Ruby Clear RUBYPT25WLED757PSYMTOPS or Surya cat no. E-TOPP

S&F recessed type round LED 12W downlighter of dia 160mm complete all as per specified and directed. Make: C&S CARINA series cat no. LTCRSLM12HPLEDRND/W or Havells edge pro cat no. EDGEPRORDDLR12WLED857S or Surya stellar cat no. SLEDLR12W6K stellar RD.

S&F decorative wall light fittings made out of polycarbonate, (Spiral B-22 base) with 01 No. 9 W LED Bulb, 230 V, 6000K, complete including required fixing arrangements complete all as specified and directed. Make: Havells cat no. CITY 1 LHDL02160099 or Bajaj cat no. BJLF1 15W RF or equivalent in Philips/ C&S.

S&F in repair decorative wall light fittings made out of polycarbonate, (Spiral B-22 base) with 01 No. 9 W LED Bulb, 230 V, 6000K, complete including required fixing arrangements complete all as specified and directed. Make: Havells cat no. CITY 1 LHDL02160099 or Bajaj cat no. BJLF1 15W RF or equivalent in Philips/ C&S.

S&F in replacement LED bulb 7/9 W, B-22 base, 6000K complete all as specified and directed. Make: C&S/ CG/ Havells/ Philips.

S&F 1.50sqmm, 3 core, multistandard PVC insulated unsheathed stanraded copper cable 1100 volts grade, complete all as specified and directed.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanised earth lead wire 4.0mm dia (7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.

S&F ceiling fan 1200mm sweep, BEE star rated, copper wound, AC single phase, 230/240 volts white colour complete with fan motor, blade, down rod, canopy and provn of connection with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and directed. Make: Orient (Energy Star) or Khaitan (Magma high speed anti dust) or Havells (Energy saving mode ES neo)

S&F heavy duty metal body exhaust fan 225/230mm sweep, copper wound, 1400 RPM, AC single phase, 230/240 volts, fancy type complete with fan motor, blade, bracket, ring and louvers including and provn of grouting 4 nos anchor bolts with nut and washer and making good to disturbed surfaces to match the existing and provn of connection with with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and directed. Make: Orient (Heavy duty)/ Usha (Turbo heavy duty metal body)/ Havells (Turbo Force HP)/ Khaitan (heavy duty metal body).

S&F heavy duty metal body exhaust fan 300mm sweep, copper wound, 1400 RPM, AC single phase, 230/240 volts, fancy type complete with fan motor, blade, bracket, ring and louvers including and provn of grouting 4 nos anchor bolts with nut and washer and making good to disturbed surfaces to match the existing and provn of connection with with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and directed. Make: Orient (Heavy duty)/ Usha (Turbo heavy duty metal body)/ Havells (Turbo Force HP)/ Khaitan (heavy duty metal body).

S&F wall mounting cabin fan 400 mm sweep, white, AC single phase, 230/240 volts including provn of 3 core flexible copper cable of size 23/0.0076 from ceiling rose to fitting terminal for making connection, fixing the fitting on wall including all necessary fixing accessories complete all as specified and directed. Make: Orient/ Khaitan/ Usha/ Havells.

S&F in replacement Exhaust fan of plastic body, 200/230mm sweep, 900RPM, AC single phase, 230/240 volts, fancy type complete with fan motor, blade, bracket and ring complete all as specified and directed. Make: Orient/ Khaitan/ Usha/ Havells.

Cutting and opening of circular holes in shape in one brick thick walls built in cement mortar for fixing of exhaust fan up to 300mm dia and making good dismantled portion in CM 1:3 or PCC 1:2:4 type B-1 using 20mm graded stone aggregate including and provn of fixing of 4 nos anchor bolts with nut and washer to fix the exhaust fan complete all as specified and directed.

Taking down carefully ceiling fan/ exhaust fan by disconnecting all electrical connection, proper cleaning and refixing the same including all electric connections with twin core flexible copper wire 23/0.0076 size after necessary repair work complete all as specified and directed.

Taking down carefully electric meter of any capacity from wall or any position by disconnecting all connection and refixing the same including all electric connection and acessories as required including teak wood board of suitable size complete all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for laying for cables etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/ loose soil complete all as specified and directed.

Removing surplus excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L for sand filling under floors or in foundatoins as in 25mm thick sand cushioning including spreading, levelling, watering and well ramming complete all as specified and directed.

Supplying & laying sub class 'B' bricks old size over LT/HT cable laid flat for protection of cable complete all as specified and directed.

M&L 40mm bore GI tubing light grade including necessary fittings laid in trenches, under road crossing, fixed on poles, walls, under floors etc complete all as specified and directed.

Supply and laying or fixing or passing through pipe testing and commissioning PVC insulated, heavy duty XLPE armoured cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape, 1100 volts grade of size 25sqmm 3.5 core complete all as specified and directed.

Supply and laying or fixing or passing through pipe testing and commissioning PVC insulated, heavy duty XLPE armoured cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape, 1100 volts grade of size 10sqmm 2 core complete all as specified and directed.

Taking down XLPE cable of any size up to 50sqmm from from trenched etc complete all as specified and directed.

M/s PS Associates

avadhenterprises

Industrial Traders