PROVISION WORK OF BATHROOM BOUNDARY WALL OR LIVING ACCN ANDGUN SHED AT BAGRAKOTE MIL STN UNDER GE SEVOKE ROAD

Amount

Schedule 'A'

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil all as specified and directed.

All as per item No.2.00 here-in-above, but depth exc 1.5m n exc 3.0m complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm in soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L cement concrete 1:3:6, type C2 (using 40 mm graded stone agg) as in foundation, filling and mass concrete complete all as specified and directed.

Sand filling under floors or in foundations or in trenches for laying of cable including watering and consolidation complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing and including form work complete all as specified and directed.

S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlines to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS sqare tube complete all as specified and directed.

S&F factory made, solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F 150mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100 mm size of stainless steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and directed.

S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250 or quality B) (Including preparation of surface and one shop coat of zinc chromate primer paint) at contractors workshop before fabrication complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.

M&L rendering 15mm thick in CM 1: 6 on fair faces of brick/concrete surfaces of wall finished even & fair w/o using extra cement complete all as specified and directed.

M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:4 in two layer of 10mm each including mixing WPC as per manufacturers instruction, finished even and smooth w/o using extra cement complete all as specified and directed. (Note : WPC will be measured and paid separetely)

Supply only integral water proofing compound complete all as specified and directed.

M&L for Screed bed or bedding layer 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and directed.

M&L rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces, 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection & paving finished even & fair without using extra cement complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L RCC M-25 Design Mix as in lintels upto 1.5m clear span and lintel band, roof band and other similar items like beam, chajjas including form work complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed.

All as per item No.31.00 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F mild steel work as in wind ties for roof, flat iron fillets (for securing wire mesh etc) and the like including drilling holes for securing bolts and fixed with bolts and nuts etc and similar work conforming to Fe-290.Gde-E-165, complete all as specified and as directed.

M&L for Preparation of new plaster surfaces and applying three coats of white wash on wall complete all as specified and directed.

S&F PVC valveless, syphonic action type flushing cistern low level, 10 litre capacity with it’s complete accessories, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc complete all as specified and directed.

S&F PVC connection 15mm dia with PTMT nuts of length 450mm complete all as specified and directed.

S&F Bib taps, CP, cast copper alloy fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm dia steel water tubing, galvanised, medium grade ISI marked with all fittings and fixed to wall and ceiling or laid in floor in old/new position complete all as specified and as directed.

All as per item No 38.00 here-in-above, but 20mm bore complete all as specified and directed.

S&F gun metal gate / globe valves 20mm bore ISI marked with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

M&L Concrete bed to drain pipes of 110mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C-2 complete all as specified and directed.

PVC (SWR) bends any radius complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Fancy type Pillar taps 15mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwde shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F low density 32mm dia, polythene waste pipe (LDPE) of pressure rating 0.6 Kgf/Cm2 complete all as specified and directed.

S&F white vitreous china wash hand basin flat back size 550 x 400mm including cast iron brackets CP waste coupling 32 mm size ,cutting for and pinning in ends of brackets complete all as specified and directed.

S&F grating round 100 mm size of PTMT. (Minimum weight 50gms) complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F stop valves, cast copper alloy, fancy type, chromium plated with long shunk and cup (concealed type) ISI marked, 15mm bore complete all as specified and directed.

M&L for precast cover slab for stagging of OHT, type B1, 1:2:4 (using 20mm graded aggregate) set in CM 1:4 complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (multilayer quality) cylindrical vertical with closed top of capacity 500 liters ISI marked hoisted and fixed in position with connecting ports (inlet, outlet and over flows ) complete all as specified and as directed.

M&L for ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed for bore of 25mm complete all as specified and directed.

Excavating over areas n exc 1.5 m deep and getting out in soft / loose of soil complete all as specified and directed.

Excavating over areas exc 1.5 m but n exc 3m deep and getting out in soft / loose of soil complete all as specified and directed.

M&L for providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks ( for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, boundarys ( for stone walling) corbwls, beackets, etc. ( of any section indicated) with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, type B-1(using 20mm graded aggregate) and Set in CM1: 4 complete all as specified and directed.

M&L for providing precast cement concrete in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, type B-1(using 20mm graded aggregate) Set in CM 1: 4 complete all as specified and directed.

M&L for RCC M25 (Design mix) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landinqs and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat) rough finished surface complete all as specified and directed.

S&F mild steel bars TMT 6mm to 8 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming complete all as specified and directed.

M&L rendering 20mm thick on fair faces of brick surfaces in CM 1:4 as in bearing plaster surface finished even and fair w/o using extra cement complete all as specified and directed.

M&L rendering 20mm thick on stone other than fair faces of brick surfaces in CM 1:4 surface finished even and smooth w/o extra cement complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears ISI marked with cement joints, fix on wall with MS clamp of required size as directed,75 mm bore sand cast pipe complete all as specified and directed.

S&F Cast Iron soil cowl 75 mm dia complete all as specified and directed.

M&L 150mm internal dia of salt glazed stone ware drain pipes grade 'A' laid in trenches and jointed complete all as specified and directed.

M&L for loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

S&F CI manhole covers 600mm dia of exc 5 Kg article of cast iron complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone agg) for DPC to horizotal or vertical surfaces including necessary form work incl mixing WPC as per manufacturer's instructions complete all as specified and directed. (WPC will be measured and paid separately)

M&L for spreading and levelling of earth filling in layers n exc. 25 cm thick as in flooring complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded aggregate) in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed.

M&L 100mm thick PCC 1:4:8, type D2 (using 40mm graded agg) as in sub base of floor complete all as specified and directed.

M&L 75mm thick PCC 1:4:8, type D2 (using 40mm graded agg) as in sub base of floor complete all as specified and directed.

M&L 50mm thick for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in padding.finished even and smooth without using extra cement complete all as specified and directed.

M&L Bricks laid flat ,in floors, old size bricks , bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed.

M&L mild steel, 8mm dia, conforming to Gd. I IS-432 (part I) part I as in reinforcement to half brick wall ( two Nos in every fourth course of half brick wall) complete all as specified and directed.

S &F mild steel screw bolt (machine made) with hexagonal head at one and screwed the other or screwed bolts each screwed and to be filled with washer and one hexagonal or square exceeding 05 cm and not exceeding 10 cm fixed 5 to 10mm dia complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.

S&F stop valves, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends ISI marked for iron pipe or for unions and fixed bore of pipe 15mm complete all as specified and directed.

S&F 50mm steel water tubes medium grade galvanised ISI marked with all fittings / fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed bpth ends for iron pipe ISI marked and fixed bore of pipe 50mm complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of walls and applying two coats of cement based paint over a coat of alkaline resistant primer complete all as specified and as directed

M&L for preparing new steel and iron surfaces of any description n.exc 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Surface dressing n exc 15cm deep in soft/loose soil complete all as specified and directed.

S&F for polished chequered cement concrete tile 30 cm x 30 cm x 25 mm thick set, jounted and pointed in neat cement slurry in floor with grey cement and pigments complete all as specified and directed.

M&L for Cement concrete 75mm thick type B-1, 1:2:4 (using 20mm graded aggregate) as in sub-base, flooring etc complete all as specified and directed.

M&L for 40mm thickPCC 1:2:4 type B-1, (using 20mm graded aggregate) as in flooring finishes finished the surface even and smooth with using extra cement complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per item No.90.00 here-in-above, but with out glazing bars complete all as specified and directed.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F pressed steel frames (Size-165X60mm) for doors thickness of profile 1.25mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W (Gde E-250, Quality 'B') including one shop coat of zinc chromate primer complete all as specified and as directed

S&F factory made 2nd class hard wood 35mm thick plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L 35 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) of second class hard wood complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of walls and applying two coats of oil based distemper emulsion paint over a coat of primer complete all as specified and as directed

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F 2nd class hard wood small fittings such as bracket of any type, latch hinges, blocked shapped door & window stopper and cleat including all necessary labour, articles n exc 200 cucm each complete all as specified and directed.

S&F 150mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F mild steel tower bolts, stove enameled black with bright bolt, 200 mm long (dia of bolt 12mm) complete all as specified and directed.

S&F 300 mm long, mild steel sliding door bolts, plate type, stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F mild steel pressed handle, ovel type, stove enamelled black, 150mm long complete all as specified and directed.

M&L for preparation of new untreated wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 38mm width Glass dividing strips, 3 mm thick and ditto complete all as specified and directed.

M&L PCC 1:2:4, type B0 (using 12.5mm graded aggregate) as in copings, kerbs and the like incl weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work as reqd complete all as specified and directed.

S&F hand and rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 Gde E -165 complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundations, mass fillings complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in loose/soft soil complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surface .complete all as specified and directed.

Cutting existing steel tubing for alteration or addition (each cut measured ) bore of pipe 40 mm or 50 mm complete all as specified and directed.

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed.

S&F steel water tubing galvanised ' medium grade' with all fittings ISI marked and fixed complete to wall and ceilings or laid in floor for bore of pipe 40 mm in old/new situation complete all as specified and directed.

S&F steel water tubing galvanised ' medium grade' of size 25mm bore with all fittings and accessories complete in trenches/ on wall/under road complete all as specified and directed.

S&F gun materl gate, globe valves ISI marked screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed bore of size 25 mm complete all as specified and directed.

Point wiring for light/fan/call bell etc. controlled by one switch with 1.50 Sqmm (nominal area) FRLS PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable drawn through and unsheathed single core solid copper conductor cable of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, including rigid PVC concealed conduit (Medium Grade) of suitable size, with all fittings and accessories including provision of mild steel terminal boxes of suitable size made with 1.6 mm thick mild steel sheet duly galvanised, for fixing switches / sockets / regulators etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for one light / fan point controlled by one switch all as specified and directed. Note : Cost of cutting of chases in walls / floors and making good the same, is deemed to be included in the unit rate of point wiring complete all as specified and directed.

All as per item No. 117.00 here-in-above but for 5/6 Amp socket point on independent board -ditto- complete all as specified and directed.

All as per item No.117.00 here-in-above but with 4 Sqmm cable for 15/16 Amp socket point on independent board and 2.50 sqmm solid copper cable for earth continuity conductor complete all as specified and directed.

S&F Switch Socket combination, 2-in-1, 3 pin, 5/6 Amps flush type complete all as specified and as directed.

S&F Switch Socket combination, 5-in-1, 5/16 Amps flush type complete all as specified and as directed.

S&F Switch piano flush type, single pole, one way, 5/6Amp complete all as specified and as directed.

S&F Ceiling rose, 3 terminals, PVC/polycarbonate, isolated body complete all as specified and as directed.

S&Fmaster LED tube 1200mm, 18w retrofit type with one mounting rail heavy quality complete with side holders. complete all as specified and directed. .

S&F ventilating fan plastic body 250 mm Sweep complete all as specified and as directed.

Supply and fixing green line smart luminaire, LED street light of capacity 40 watt, compact body, in and including providing of 0.5mtr, 40mm bore, light grade GI bracket duly embeded in wall complete all as specified and directed

S&F Sheet Metal enclosure for SPN DBs, 4 Ways, complete suitable for 240 Volts, AC, 50 Hz supply, and fixed in recess in brick masonary wall complete all as specified and directed.

S&F SPN MCB of capacity 32 Amps, 240 volts, complete all as specified and as directed.

S&F MCB, SP,240 volts, breaking capacity 10 KA, rating 6 to 32 amps, complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick R.C.C. 1:2;4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer,charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed.

S&F energy efficient, 5 star rated ceiling fan 1200 mm sweep, with all acceesories and connecting up with the ceiling rose with new flexible wire of suitable size complete all as specified and as directed.

S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watts complete all as specified and as directed.

S&F Sheet Metal enclosure( IP-43) for SPN DBs, 8 Ways, Double Door, suitable for mounting SPN MCBs as incomer & SP MCBs as outgoings, built- in bus bars complete suitable for 240 Volts, AC, 50 Hz supply, and fixed in recess in brick masonary wall complete all as specified and directed.

S&F Sheet Metal enclosure( IP-43) for SPN DBs,2 Ways, suitable for mounting SPN MCBs complete suitable for 240 Volts, AC, 50 Hz supply, and fixed in recess in brick masonary wall complete all as specified and directed.

Supply and lay in trenches or passing through pipe 1100 volts grade armoured heavy duty XLPE insulated electric cable with aluminium conductor of cross sectional area 10 sqmm 2 core complete all as specified and as directed. NOTE : Specification of cable shall be as under:- (a) Inner sheathing shall be of extruded PVC. (b) Cable shall also be supplied with sequences hall marking at every metre on the luner sheathing. (c) Ultra violet radiation resistance compounded comprising to ASRM-2863 flame netarded as per EIV specification. (d) Anti rodent and antitermite compound added. (e) PVC compounds of various grades as IS-5831. (f) Compaction conductors shall be shaped and arrangment to the same will be on the cable.

All as per item No 135.00 here-in-before but -ditto-

Supply and lay burnt best quality locally available old size, sub class 'B' bricks laid in trenches perpendicular to UG cable for cable protection complete all as specified and as directed.

S&F GI Pipe 40mm bore light grade fixed for cable protection along with wall complete all as specified and directed.

Cutting existing metal road/PCC foot path not exc 0.45 m width and not exc 0.60 m in depth including all connected earth work and making good disturbed surfaces to match with the existing surface in similar specification and finish complete all as directed by Engr-in-Charge.

S&F GI Pipe 25mm bore light grade ISI marked fixed for cable protection along with wall complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and simiolar items including edges rough finished surface complete all as specified and directed.

M&L for surfaces point wiring with two single core PVC insulated and unsheathed stranded copper conductor cable, FRLS 1100 volts grade, size 1.5 sqmm (nominal are) each with one 1.5 sqmm (Nominal area), single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade, as earth continuity conductor in and including surface casing caping of suitable size and all accessories including provision of mild steel terminal boxes of 1.6mm thick, fixed in recess of wall with brass chromium plated screws and cap washer complete for one light / fan point controlled by one switch all as specified and directed.

Use and waste of frormwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) or foundation and plinth beams, and similar work vertical or to batter rough finished surface complete all as specified and directed.

M S BHARAT CONSTRUCTION CO.

SHRI NARESH GUPTA