CONSTRUCTION OF 02 ADDITIONAL CLASS ROOM SECONDARY AT HS DALWAS ZONE BATOTE DISTT. RAMBAN

Amount

Demolishing stone rubble masonry manually/by mechanical meansincluding stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar.

Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 meters lead :Of area of 3 sqm. and below

Earth work in excavation in foundation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5(1:4:8) grade, with 20mm nominal size of (nallah stone aggregates).(including all carriages lead and lift if any )

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-10(1:3:6) grade, with 20mm nominal size of nallah stone aggregates,. With 20 % bouilders(including all carriages lead and lift if any )

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-15(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates.(including all carriages lead and lift if any )

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement(including all carriages lead and lift if any )

Reinforcement of R.c.c work in plinth band incl. straightening, cutting, bending, placing in position and binding all complete.(including all carriages lead and lift if any )

Providing form work for slab base, beams and lintel band including strutting, propping and removal of form.

Providing form work for slab base, beams and lintel band including strutting, propping and removal of form.

Brick work with F.P.S bricks of class designation 75 in 1:6 (cement: sand) mortar.(including all carriages lead and lift if any )

Extra for brick work in superstructure above plinth level (by manual mean).(including all carriages lead and lift if any )

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed andfixed in position with hold fast lugs or with dash fastenersof required dia and length (hold fast lugs or with dashfasteners shall be paid for separately)

Cement plaster in 1:6 ( 1 cement:6 fine sand ) ,15 mm thick.(including all carriages lead and lift if any )

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand(including all carriages lead and lift if any )

Providing and fixing paneled or paneled or glazed shutters for doors and windows and clestory windows including ISI marked black enameled M.S butt hinges with necessary screws, including paneling which will be paid separately.(35 mm thick of 2nd class kail wood).

Providing and fixing panelling or panelling and glazing inpanelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. coir veneer board (conforming to IS 14842) 12mm thick

Providing and fixing 35mm thick glazed shutters for doors, windows- and clerestory windows using 1.Okg/sqm (4mm thick) float of glass panes including lSI marked M.S. pressed butt· hinges bright finished of required size with necessary screws second class Kail wood

Cement concrete flooring in (1:2:4), finishing with a floating coat of cement slurry, but excl. the cost of nosing of steps etc. complete.45mm thickcrushed(including all carriages lead and lift if any )

Providing fixing and incorporating glass strips nominal size of 35 mm x 4 mm) under flooring.

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades.

Providing 40x5 mm flat iron hold fast 40 cm long includingfixing to frame with 10mm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size )

Providing and fixing aluminium sliding door bolts lSImarked anodised (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10 mm

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Twin rubber stopper

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm

Providing and fixing aluminium handles lSI markedanodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1O sqm

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and ineluding priming coat with cement primer

Making plinth protection 50mm thick with cement conc .(1:3:6) ,20 mm nominal size of stone aggregates over 75mm bed of dry brick ballast,40mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth.(including all carriages lead and lift if any )

Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Structural steel work in built up section,trusses and framed work,including cutting,hoisting fixing in position and applying a priming coat of approved steel primer all complete.(including all carriages lead and lift if any )

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated Jor L hooks, boltsand nuts 8mm diameter withbitumen and GI limpet washersor with G. I. limpet washers filled with white leadand includinga coat of approved steelprimerandtwo coats of approved paint on overlapping of sheetscomplete(uptoanypitch in horizontal/vertical or curved surface)excludingthecost ofpurlins, rafters and trusses and including cutting to size andshape whereever required.0.63mm thick with zinc coating not less than 27 5gm/m2(including all carriages lead and lift if any )

Providing and fixing flat pressed 3 layers medium density partical board or graded particles board(Grade-1) IS:3087 marked(Novapan,Ecoboard or Bhutan board etc.) in ceiling with necessaty nails etc complete. 6 mm thick

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood

Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer-incharge.

MS Z Constrcution and Brothers

Mohd Amin Shan

SURJEET SINGH

M/S SHAH NAWAZ

M/S Irfan HAider

Irshad Hussain Wani

M/S ABDUL KARIM WANI

ABDUL QAYOOM

Gh nabi angher

M A ENGINEERING CONSTRUCTION COMPANY

TANVEER AHMED MIR

Mohd Iqbal Zergar

Choor Singh

M/s Ali MOhd